I wanted to boot gentoo on xen, but it doesn''t work.
What can I do?
Booting ''Xen 3.0.0 / Linux 2.6.12.5''
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /xen.gz dom0_mem=131072 com1=115200,8n1
[Multiboot-elf, <0x100000:0x641cc:0x27e34>, shtab=0x18c078,
entry=0x100000]
module /vmlinuz-2.6.12.5-xen-0 root=/dev/md0 console=tty0 console=ttyS0,115200
hdd=ide-scsi showopts debug
[Multiboot-module @ 0x18d000, 0x33b468 bytes]
__ __ _____ ___ _ _
\ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
\ // _ \ ''_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-devel (root@janus.infra.afaa.asso.fr) (gcc version 3.4.4
(Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) Sun Nov 13 17:45:51 CET 2005
Latest ChangeSet: unavailable
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003fff0000 (usable)
(XEN) 000000003fff0000 - 000000003fff8000 (ACPI data)
(XEN) 000000003fff8000 - 0000000040000000 (ACPI NVS)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1048124kB)
(XEN) Xen heap: 10MB (10668kB)
(XEN) PAE disabled.
(XEN) found SMP MP-table at 000fb930
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 AMI ) @ 0x000fa9e0
(XEN) ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x3fff0000
(XEN) ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x3fff0030
(XEN) ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x3fff00c0
(XEN) ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:8 APIC version 16
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 1800.096 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 256K (64 bytes/line)
(XEN) CPU0: AMD Athlon(tm) XP 2200+ stepping 01
(XEN) Total of 1 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 1 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=no,LOADER=generic''
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 01800000->02000000 (30720 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c046ed7c
(XEN) Init. ramdisk: c046f000->c046f000
(XEN) Phys-Mach map: c046f000->c048f000
(XEN) Start info: c048f000->c0490000
(XEN) Page tables: c0490000->c0493000
(XEN) Boot stack: c0493000->c0494000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch input to Xen).
Linux version 2.6.12.6.5-xen (root@janus-1) (gcc version 3.4.4 (Gentoo 3.4.4,
ssp-3.4.4-1.0, pie-8.7.8)) #1 Tue Nov 22 03:57:20 CET 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008000000 (usable)
0MB HIGHMEM available.
136MB LOWMEM available.
On node 0 totalpages: 34816
DMA zone: 34816 pages, LIFO batch:15
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
found SMP MP-table at 000fb930
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa9e0
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x3fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x3fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x3fff00c0
ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
IRQ lockup detection disabled
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: root=/dev/md0 console=tty0 console=ttyS0,115200
hdd=ide-scsi showopts debug
ide_setup: hdd=ide-scsi
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 1800.064 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Software IO TLB disabled
vmalloc area: c9000000-fb7fe000, maxmem 34000000
Memory: 125568k/139264k available (2284k kernel code, 5144k reserved, 809k data,
164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3591.37 BogoMIPS (lpj=17956864)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000
00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383d3f1 c1c3fbff 00000000 00000020 00000000
00000000 00000000
CPU: AMD Athlon(tm) XP 2200+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking ''hlt'' instruction... disabled
ENABLING IO-APIC IRQs
NET: Registered protocol family 16
xenbus_probe_init
PCI: Using configuration type 1
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn''t work, try "pci=routeirq". If it
helps, post a report
Grant table initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6L200P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6L200P0, ATA DISK drive
hdd: SAMSUNG CD-R/RW SW-248F, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13
hda14 hda15 >
hdc: max request size: 1024KiB
hdc: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13
hdc14 hdc15 >
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 21, io mem 0xdfffd700
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 2822.400 MB/sec
raid5: using function: pIII_sse (2822.400 MB/sec)
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 8
NET: Registered protocol family 20
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hdc15 ...
md: adding hdc15 ...
md: hdc14 has different UUID to hdc15
md: hdc8 has different UUID to hdc15
md: hdc7 has different UUID to hdc15
md: hdc6 has different UUID to hdc15
md: hdc5 has different UUID to hdc15
md: hdc3 has different UUID to hdc15
md: hdc2 has different UUID to hdc15
md: adding hda15 ...
md: hda14 has different UUID to hdc15
md: hda8 has different UUID to hdc15
md: hda7 has different UUID to hdc15
md: hda6 has different UUID to hdc15
md: hda5 has different UUID to hdc15
md: hda3 has different UUID to hdc15
md: hda2 has different UUID to hdc15
md: created md7
md: bind<hda15>
md: bind<hdc15>
md: running: <hdc15><hda15>
raid1: raid set md7 active with 2 out of 2 mirrors
md: considering hdc14 ...
md: adding hdc14 ...
md: hdc8 has different UUID to hdc14
md: hdc7 has different UUID to hdc14
md: hdc6 has different UUID to hdc14
md: hdc5 has different UUID to hdc14
md: hdc3 has different UUID to hdc14
md: hdc2 has different UUID to hdc14
md: adding hda14 ...
md: hda8 has different UUID to hdc14
md: hda7 has different UUID to hdc14
md: hda6 has different UUID to hdc14
md: hda5 has different UUID to hdc14
md: hda3 has different UUID to hdc14
md: hda2 has different UUID to hdc14
md: created md6
md: bind<hda14>
md: bind<hdc14>
md: running: <hdc14><hda14>
raid1: raid set md6 active with 2 out of 2 mirrors
md: considering hdc8 ...
md: adding hdc8 ...
md: hdc7 has different UUID to hdc8
md: hdc6 has different UUID to hdc8
md: hdc5 has different UUID to hdc8
md: hdc3 has different UUID to hdc8
md: hdc2 has different UUID to hdc8
md: adding hda8 ...
md: hda7 has different UUID to hdc8
md: hda6 has different UUID to hdc8
md: hda5 has different UUID to hdc8
md: hda3 has different UUID to hdc8
md: hda2 has different UUID to hdc8
md: created md5
md: bind<hda8>
md: bind<hdc8>
md: running: <hdc8><hda8>
raid1: raid set md5 active with 2 out of 2 mirrors
md: considering hdc7 ...
md: adding hdc7 ...
md: hdc6 has different UUID to hdc7
md: hdc5 has different UUID to hdc7
md: hdc3 has different UUID to hdc7
md: hdc2 has different UUID to hdc7
md: adding hda7 ...
md: hda6 has different UUID to hdc7
md: hda5 has different UUID to hdc7
md: hda3 has different UUID to hdc7
md: hda2 has different UUID to hdc7
md: created md4
md: bind<hda7>
md: bind<hdc7>
md: running: <hdc7><hda7>
raid1: raid set md4 active with 2 out of 2 mirrors
md: considering hdc6 ...
md: adding hdc6 ...
md: hdc5 has different UUID to hdc6
md: hdc3 has different UUID to hdc6
md: hdc2 has different UUID to hdc6
md: adding hda6 ...
md: hda5 has different UUID to hdc6
md: hda3 has different UUID to hdc6
md: hda2 has different UUID to hdc6
md: created md3
md: bind<hda6>
md: bind<hdc6>
md: running: <hdc6><hda6>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering hdc5 ...
md: adding hdc5 ...
md: hdc3 has different UUID to hdc5
md: hdc2 has different UUID to hdc5
md: adding hda5 ...
md: hda3 has different UUID to hdc5
md: hda2 has different UUID to hdc5
md: created md2
md: bind<hda5>
md: bind<hdc5>
md: running: <hdc5><hda5>
raid1: raid set md2 active with 2 out of 2 mirrors
md: considering hdc3 ...
md: adding hdc3 ...
md: hdc2 has different UUID to hdc3
md: adding hda3 ...
md: hda2 has different UUID to hdc3
md: created md1
md: bind<hda3>
md: bind<hdc3>
md: running: <hdc3><hda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering hdc2 ...
md: adding hdc2 ...
md: adding hda2 ...
md: created md0
md: bind<hda2>
md: bind<hdc2>
md: running: <hdc2><hda2>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 164k freed
INIT: version 2.86 booting
NET: Registered protocol family 1
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2005 Gentoo Foundation; Distributed under the GPLv2
* Mounting proc at /proc ... [ ok ]
* Mounting sysfs at /sys ... [ ok ]
* Mounting /dev for udev ... [ ok ]
* Configuring system to use udev ...
* Populating /dev with device nodes ...
* Setting /sbin/udevsend as hotplug agent ...
[ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Activating (possible) swap ...Adding 2096440k swap on /dev/hda9. Priority:-1
extents:1
Adding 2096440k swap on /dev/hdc9. Priority:-2 extents:1
[ ok ]
* Remounting root filesystem read-only (if necessary) ... [ ok ]
* Checking root filesystem .../dev/md/0: clean, 369688/1050400 files,
998882/2100480 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Setting hostname to localhost ... [ ok ]
* Calculating module dependencies ... [ ok ]
* Using /etc/modules.autoload.d/kernel-2.6 as config:
* Loading module natsemi ... [ ok ]
* Loading module tg3 ... [ ok ]
* Autoloaded 2 module(s)
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ... [ ok ]
* Activating (possibly) more swap ... [ ok ]
* Setting system clock to hardware clock [UTC] ...Oops: 0002 [#1]
PREEMPT
Modules linked in: rtc tg3 natsemi unix
CPU: 0
EIP: 0061:[<c012a12c>] Not tainted VLI
EFLAGS: 00010202 (2.6.12.6.5-xen)
EIP is at __mod_timer+0xec/0x2b0
eax: 6b6b6b6b ebx: 6b6b6b6b ecx: 00000001 edx: 6b6b6b6b
esi: c75b60c8 edi: c043ffc0 ebp: 00000000 esp: c1167eb0
ds: 007b es: 007b ss: 0069
Process events/0 (pid: 3, threadinfo=c1166000 task=c048d020)
Stack: 6b6b6b6b c75b60c8 c012a44b c75b60c8 00000000 c75b6000 c1167f18 c1167f18
00000000 c02e0a26 c75b60c8 6b6afe65 c75b6000 c02e0a74 c75b6000 c75b6000
c02e1280 c75b6000 c1167f18 c75b6000 c1167f18 c02db2be c75b6000 c114fdac
Call Trace:
[<c012a44b>] mod_timer+0x2b/0xa0
[<c02e0a26>] __netdev_watchdog_up+0x36/0x60
[<c02e0a74>] dev_watchdog_up+0x24/0x40
[<c02e1280>] dev_activate+0xc0/0x130
[<c02db2be>] linkwatch_run_queue+0xee/0x180
[<c02db379>] linkwatch_event+0x29/0x70
[<c0133f64>] worker_thread+0x214/0x3e0
[<c033890d>] schedule+0x3bd/0x790
[<c02db350>] linkwatch_event+0x0/0x70
[<c011b380>] default_wake_function+0x0/0x20
[<c011b380>] default_wake_function+0x0/0x20
[<c0133d50>] worker_thread+0x0/0x3e0
[<c01396b8>] kthread+0xa8/0xe0
[<c0139610>] kthread+0x0/0xe0
[<c01071e5>] kernel_thread_helper+0x5/0x10
Code: 00 81 fb c0 ff 43 c0 72 97 b8 01 00 00 00 e8 7c 11 ff ff b8 01 00 00 00 e8
72 11 ff ff 39 5e 18 75 97 85 db 74 1f 8b 56 04 8b 06 <89> 50 04 89 02 c7
46 04 00 02 20 00 c7 06 00 01 10 00 c7 44 24
<0>Kernel panic - not syncing: Fatal exception in interrupt
(XEN) Domain 0 shutdown: rebooting machine.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
--
__Pascal Bourguignon__ http://www.informatimago.com/
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users