search for: hdc2

...at moe ~]# fdisk -l /dev/hdc Disk /dev/hdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 13 104391 83 Linux /dev/hdc2 14 9729 78043770 8e Linux LVM [root at moe ~]# mount -t ext3 /dev/hdc2 /Big-Drive/ mount: wrong fs type, bad option, bad superblock on /dev/hdc2, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or s...

first time poster here - hello everyone I started out with CentOS x86 5.3 with the following partitions on my source hard drive: /dev/hdc1 swap /dev/hdc2 / I did the following to migrate my CentOS box to the destination hard drive: 1. boot up with CentOS 5.3 livecd in rescue mode 2. partition destination hard drive (/dev/hdd) /dev/hdd1 swap /dev/hdd2 / 3. create the filesystem on the destination hard drive mke2fs -j /dev/hdd2...

...4792/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 > hdc: max request size: 1024KiB hdc: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133) hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 hdc14 hdc15 > ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5 ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.3: new USB bus regi...

Hi. I'm using e2fsprogs 1.23 on a Roswell system with a patched 2.4.7 kernel (using patch ext3-2.4-0.9.5-247) and am trying to create an ext3 filesystem whose journal is located on another device. The incantation I'm trying is: mke2fs -j -J device=/dev/hdc2 /dev/hdc3 I keep getting an error along the lines of "mke2fs: Journal superblock not found". I've tried creating different types of filesystems (ext2, ext3, etc.) on the target device for journaling, but this didn't seem to change anything. Could someone point out the error or...

...come up w/the right answer. This system works beautifully w/nothing wrong w/it. But my goal is to be able to test the raid system by just unplugging hda to mimic a faulty drive and have it just carry on and boot from hdc. md0 = hda1/hdc1 /boot (primary boot partitions on both drives) md1 = hda2/hdc2 / is it possible to just edit /boot/grub.conf??? I am really not sure of this Thx in advance. John Rose

Hi, I have a problem with compilation my own kernel with the xen-2.0-testing package. I use this packadge because there are drivers for the nforce2 nic called fordedeth. I do the following: wget xen-2.0-testing-src.tgz tar xvfz xen-2.0-testing-src.tgz cd xen-2.0-testing make world ( The first compilation show now errors and build all kernels. ) cd linux-2.6.11-xen0 make clean make ARCH=xen

Hi I have a Raid 1 centos 4.4 setup and now have this /proc/mdstat output: [root at server admin]# cat /proc/mdstat Personalities : [raid1] md2 : active raid1 hdc2[1] hda2[0] 1052160 blocks [2/2] [UU] md1 : active raid1 hda3[0] 77023552 blocks [2/1] [U_] md0 : active raid1 hdc1[1] hda1[0] 104320 blocks [2/2] [UU] What happens with md1 ? My dmesg output is: [root at server admin]# dmesg | grep md1 Kernel command line: ro root=/dev/md1...

Hi list, i'm using Samba 3.0.14a as standalone-pdc with posix-acl-features. On the fileserver i've mounted an ext3 partition to /home /dev/hdc2 /home type ext3 (rw,usrquota,acl) The following directory structur exists on /home /home +-/public_folder (exported per samba as \\fileserver\public ) | +-/a | +-/a_ann | | +-/anyfolder | | +- anyfiles | +-/a_bert | +-/a_sven | +-/a_eve | +-/b +-/b_4 +-/b_5 +-/b_6 The following user...

...t localhost6 ~]# fdisk -l Disk /dev/hdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 1275 10241406 7 HPFS/NTFS /dev/hdc2 1276 30400 233946562+ f W95 Ext'd (LBA) /dev/hdc5 1276 7649 51199123+ 7 HPFS/NTFS /dev/hdc6 7650 14023 51199123+ 7 HPFS/NTFS /dev/hdc7 14024 20397 51199123+ 7 HPFS/NTFS /dev/hdc8 20398 267...

Hi, im having this on my screen and dmesg im not sure if this is an error message. btw im using centos 4.4 with 2 x 200GB PATA drives. md: md0: sync done. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:hda2 disk 1, wo:0, o:1, dev:hdc2 md: delaying resync of md5 until md3 has finished resync (they share one or more physical units) md: syncing RAID array md5 md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. md: using maximum available idle IO bandwith (but not more than 200000 KB/sec) for reconstruction. md: using 1...

I am running RH 7.3 with kernel 2.4.18-27.7.x. Recently I have added a new 60GB Quantum IDE hard drive to the server. I have set it up as a MASTER on a separate IDE channel. Two partitions on the /dev/hdc are /dev/hdc1, /dev/hdc2 - both using ext3. For more detailed HDD parameters, this is 'hdparm -i /dev/hdc': ----------------- /dev/hdc: Model=IC35L060AVV207-0, FwRev=V22OA66A, SerialNo=VNVB30G8TD23UH Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbyt...

...not boot. in druid, when I am config. the raid arrays, I always create the boot partitions in hda1 and hdc1 and make them primary...maybe I am doing wrong by giving them 200mb instead of 100mb but I do it in the other 2 raided systems I run and no probs. I then create the sys partitions: hda2 and hdc2 lastly, the swaps as hda3 and hdc3 ........................... grub: here's what I did/do and here's the results: linux rescue chroot /mnt/sysimage /sbin/grub-install /dev/hda ...the complaint/result: /dev/md0 does not have any corresponding drive I have tried: /sbin/grub-install /de...

I am trying to create an additional domain and have created a configuration file based on the examples. When I try to boot the domain, it eventually hits a Kernel panic, as follows: Red Hat nash version 4.1.18 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none

.../dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 /dev/hdc2 swap swap defaults 0 0 /dev/hda2 swap swap defaults 0 0 /dev/fd0 /media/floppy auto pamconsole,exec,noauto,managed 0 0 dmesg Linux version 2.6.9-42.0.3.EL (buildsvn at build-i386) (gcc...

...nel. In Dom0, the Ali-controller works (ive tested it). DomU also boots perfectly. Now i did the following: i added a parameter to my /boot/grub/menu.list which makes the important line look like the following: kernel /boot/xen-3.0.3-1-i386-pae.gz module /boot/vmlinuz-2.6.18-4-xen-686 root=/dev/hdc2 ro console=tty0 pciback.hide=(00:0a.0)(00:0a.1)(00:0a.2)(00:0a.3) my lspci looks like the following: 00:0a.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:0a.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:0a.2 USB Controller: ALi Corporation USB 1.1 Controller (...

...em to figure out how to get it out of the system????) Anyhow I rebuilt a 2nd server, and tested and notice the same, even on a working systems I cannot mount the drives in another system....?? So, anyone able to help me either, mount the failed system (currantly sitting in the working system as hdc2) or mount it into anything else so I can copy some of the data off? This all started with a Grub error 25 that I could not seem to fix... Thanks for any tips. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachmen...

.../proc/mdstat, but when I reboot /proc/mdstat again reads as below, with md3 [0] [1] reversed. [root]# cat /proc/mdstat Personalities : [raid1] md3 : active raid1 hda3[0] hdc3[1] 1000320 blocks [2/2] [UU] md1 : active raid1 hdc1[1] hda1[0] 1953408 blocks [2/2] [UU] md2 : active raid1 hdc2[1] hda2[0] 1953408 blocks [2/2] [UU] md5 : active raid1 hdc5[1] hda5[0] 1953408 blocks [2/2] [UU] md6 : active raid1 hdc6[1] hda6[0] 71295232 blocks [2/2] [UU] unused devices: <none>

Hello all. I am using plain 2.4.7 with ext3-2.4-0.9.4-247, compiled with gcc-2.96-85 on a RH7.1 distribution with the relevant changes, i.e. e2fsprogs-1.22-1, mount-2.11g-4 and util-linux-2.11f-3 taken from rawhide. I am using sometimes my /usr/local partition for ext3 testing: /dev/hdc2 3842408 738176 2909044 21% /usr/local For my DIY testing, I am timing this trivial script which copies, decompresses and deletes the compressed source 2.2.17 kernel of 17563583 bytes (17M). The source partition /dev/hdc4 885468 792616 47872 95% /incoming...

I have a CentOS 4.2 system that was set up VERY quickly following the demise of its former life as a CentOS 3 server - you don't want the full story, but it had to be done quickly to get a company up and working following a slight disaster involving an electrician, a portable appliance safety tester and a pulled power cable - anyway, here's where I am at... Everything is running fine but

...tem log). The output of fdisk is Code: Disk /dev/hdc: 46.1 GB, 46115758080 bytes 255 heads, 63 sectors/track, 5606 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 1 2295 18434587 83 Linux /dev/hdc2 2296 4207 15358140 83 Linux /dev/hdc3 4208 5542 10723387+ 83 Linux /dev/hdc4 5543 5606 514080 f Win95 Ext'd (LBA) /dev/hdc5 5543 5606 514048+ 82 Linux swap And mount -t ext3 /dev/hdc1 /audio gives mount:...