Hello,
With gentoo, I''m trying to boot linux-2.6.12.6.5-xen on xen 3.0-devel
with root=/dev/md0, a RAID1 partition.
Unfortunately, it breaks with:
devfs_mk_dev: could not append to parent for md/0
(the actual error is 17, EEXIST, it seems md/0 already exists in devfs).
The significant log lines lines I''ve got are:
raid1 and raid5 personality registrations,
raid5 selects its function,
md driver 0.90.1 initialize,
then I get NET:, input: IP: TCP: NET: lines,
then the defvs_mk_def error,
followed by md: autodetecting,
but md: autorun finds none of my RAID partitions, then panic.
When booting directly with a linux kernel, I get a Partition check:
log which lists all my partitions, but that''s not the case when I boot
with xen.
Does xen hide the partitions from dom0?
------------------------------------------------------------------------
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /xen.gz dom0_mem=131072 com1=115200,8n1
[Multiboot-elf, <0x100000:0x641cc:0x27e34>, shtab=0x18c078,
entry=0x100000]
module /vmlinuz-2.6.12.5-xen-0 root=/dev/md0 console=tty0 console=ttyS0,115200
hdd=ide-scsi showopts debug
[Multiboot-module @ 0x18d000, 0x31f07c bytes]
__ __ _____ ___ _ _
\ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
\ // _ \ ''_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-devel (root@janus.infra.afaa.asso.fr) (gcc version 3.4.4
(Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) Sun Nov 13 17:45:51 CET 2005
Latest ChangeSet: unavailable
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000003fff0000 (usable)
(XEN) 000000003fff0000 - 000000003fff8000 (ACPI data)
(XEN) 000000003fff8000 - 0000000040000000 (ACPI NVS)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff80000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1048124kB)
(XEN) Xen heap: 10MB (10668kB)
(XEN) PAE disabled.
(XEN) found SMP MP-table at 000fb930
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 AMI ) @ 0x000fa9e0
(XEN) ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x3fff0000
(XEN) ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x3fff0030
(XEN) ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x3fff00c0
(XEN) ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:8 APIC version 16
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 1800.096 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 256K (64 bytes/line)
(XEN) CPU0: AMD Athlon(tm) XP 2200+ stepping 01
(XEN) Total of 1 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 1 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
''GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=no,LOADER=generic''
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 01800000->02000000 (30720 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c044ff7c
(XEN) Init. ramdisk: c0450000->c0450000
(XEN) Phys-Mach map: c0450000->c0470000
(XEN) Start info: c0470000->c0471000
(XEN) Page tables: c0471000->c0474000
(XEN) Boot stack: c0474000->c0475000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times
to switch input to Xen).
Linux version 2.6.12.6.5-xen (root@localhost) (gcc version 3.4.4 (Gentoo 3.4.4,
ssp-3.4.4-1.0, pie-8.7.8)) #1 Sun Nov 20 00:09:26 CET 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000008000000 (usable)
0MB HIGHMEM available.
136MB LOWMEM available.
On node 0 totalpages: 34816
DMA zone: 34816 pages, LIFO batch:15
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
found SMP MP-table at 000fb930
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa9e0
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x3fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x3fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x3fff00c0
ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
IRQ lockup detection disabled
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: root=/dev/md0 console=tty0 console=ttyS0,115200
hdd=ide-scsi showopts debug
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 1800.064 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Software IO TLB disabled
vmalloc area: c9000000-fb7fe000, maxmem 34000000
Memory: 125696k/139264k available (2203k kernel code, 5020k reserved, 787k data,
156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3591.37 BogoMIPS (lpj=17956864)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000
00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383d3f1 c1c3fbff 00000000 00000020 00000000
00000000 00000000
CPU: AMD Athlon(tm) XP 2200+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking ''hlt'' instruction... disabled
ENABLING IO-APIC IRQs
NET: Registered protocol family 16
xenbus_probe_init
PCI: Using configuration type 1
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn''t work, try "pci=routeirq". If it
helps, post a report
Grant table initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 21, io mem 0xdfffd700
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 2504.400 MB/sec
raid5: using function: pIII_sse (2504.400 MB/sec)
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 8
NET: Registered protocol family 20
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: unable to read superblock
EXT2-fs: unable to read superblock
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(9,0)
(XEN) Domain 0 shutdown: rebooting machine.
Press any key to continue.
------------------------------------------------------------------------
For comparison, the boot log of a linux-2.4.20 without xen on the same system:
------------------------------------------------------------------------
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel (hd0,0)/vmlinuz-2.4.20.raid root=/dev/md2 vga=0x317 console=tty0 consol
e=ttyS0,115200 hdd=ide-scsi hddlun=0 splash=silent showopts
[Linux-bzImage, setup=0x1400, size=0x122b52]
initrd (hd0,0)/initrd
[Linux-initrd @ 0x37f92000, 0x5d512 bytes]
Linux version 2.4.20-4GB (root@janus-4) (gcc version 3.3 20030226 (prerelease)
(SuSE Linux)) #4 Sat May 1 08:55:53 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32752 pages.
ACPI: RSDP (v000 AMI ) @ 0x000fa9e0
ACPI: RSDT (v001 AMIINT VIA_K7 00000.00016) @ 0x3fff0000
ACPI: FADT (v001 AMIINT VIA_K7 00000.00017) @ 0x3fff0030
ACPI: MADT (v001 AMIINT VIA_K7 00000.00009) @ 0x3fff00c0
ACPI: DSDT (v001 VIA VIA_K7 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
Building zonelist for node : 0
Kernel command line: root=/dev/md2 vga=0x317 console=tty0 console=ttyS0,115200
hdd=ide-scsi hddlun=0 splash=silent showopts
ide_setup: hdd=ide-scsi
ide_setup: hddlun=0
bootsplash: silent mode.
Initializing CPU#0
Detected 1800.109 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3591.37 BogoMIPS
Memory: 1032504k/1048512k available (1608k kernel code, 15620k reserved, 580k
data, 160k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2200+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking ''hlt'' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030228
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
PCI: Probing PCI hardware
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option ''pci=noacpi''
or even ''acpi=off''
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: overridden by ACPI.
mxt_scan_bios: enter
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
allocated 32 pages and 32 bhs reserved for the highmem bounces
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 65532
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xd0000000, mapped to 0xf8814000, size 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:561e
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 30311 bytes, found (1024x768,
23130 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 118x38
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6L200P0, ATA DISK drive
blk: queue c03b6500, I/O limit 4095Mb (mask 0xffffffff)
hdc: Maxtor 6L200P0, ATA DISK drive
hdd: SAMSUNG CD-R/RW SW-248F, ATAPI CD/DVD-ROM drive
blk: queue c03b6980, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13
hda14 hda15 >
hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13
hdc14 hdc15 >
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2748.800 MB/sec
32regs : 1775.600 MB/sec
pIII_sse : 4803.200 MB/sec
pII_mmx : 4212.400 MB/sec
p5_mmx : 5382.000 MB/sec
raid5: using function: pIII_sse (4803.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
[events: 00000047]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 00000047]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
[events: 0000003e]
md: autorun ...
md: considering hdc15 ...
md: adding hdc15 ...
md: adding hda15 ...
md: created md7
md: bind<hda15,1>
md: bind<hdc15,2>
md: running: <hdc15><hda15>
md: hdc15''s event counter: 0000003e
md: hda15''s event counter: 0000003e
md: RAID level 1 does not need chunksize! Continuing anyway.
md7: max total readahead window set to 508k
md7: 1 data-disks, max readahead per data-disk: 508k
raid1: device hdc15 operational as mirror 1
raid1: device hda15 operational as mirror 0
raid1: raid set md7 active with 2 out of 2 mirrors
md: updating md7 RAID superblock on device
md: hdc15 [events: 0000003f]<6>(write) hdc15''s sb offset:
56444224
md: hda15 [events: 0000003f]<6>(write) hda15''s sb offset:
56444224
[events: 00000000]
md: invalid raid superblock magic on md7
md: md7 has invalid sb, not importing!
md: no nested md device found
md: considering hdc14 ...
md: adding hdc14 ...
md: adding hda14 ...
md: created md6
md: bind<hda14,1>
md: bind<hdc14,2>
md: running: <hdc14><hda14>
md: hdc14''s event counter: 0000003e
md: hda14''s event counter: 0000003e
md: RAID level 1 does not need chunksize! Continuing anyway.
md6: max total readahead window set to 508k
md6: 1 data-disks, max readahead per data-disk: 508k
raid1: device hdc14 operational as mirror 1
raid1: device hda14 operational as mirror 0
raid1: raid set md6 active with 2 out of 2 mirrors
md: updating md6 RAID superblock on device
md: hdc14 [events: 0000003f]<6>(write) hdc14''s sb offset:
56444224
md: hda14 [events: 0000003f]<6>(write) hda14''s sb offset:
56444224
[events: 3cd74c31]
md: invalid raid superblock magic on md6
md: md6 has invalid sb, not importing!
md: no nested md device found
md: considering hdc8 ...
md: adding hdc8 ...
md: adding hda8 ...
md: created md5
md: bind<hda8,1>
md: bind<hdc8,2>
md: running: <hdc8><hda8>
md: hdc8''s event counter: 0000003e
md: hda8''s event counter: 0000003e
md: RAID level 1 does not need chunksize! Continuing anyway.
md5: max total readahead window set to 508k
md5: 1 data-disks, max readahead per data-disk: 508k
raid1: device hdc8 operational as mirror 1
raid1: device hda8 operational as mirror 0
raid1: raid set md5 active with 2 out of 2 mirrors
md: updating md5 RAID superblock on device
md: hdc8 [events: 0000003f]<6>(write) hdc8''s sb offset: 14707392
md: hda8 [events: 0000003f]<6>(write) hda8''s sb offset: 14707392
[events: 00000000]
md: invalid raid superblock magic on md5
md: md5 has invalid sb, not importing!
md: no nested md device found
md: considering hdc7 ...
md: adding hdc7 ...
md: adding hda7 ...
md: created md4
md: bind<hda7,1>
md: bind<hdc7,2>
md: running: <hdc7><hda7>
md: hdc7''s event counter: 0000003e
md: hda7''s event counter: 0000003e
md: RAID level 1 does not need chunksize! Continuing anyway.
md4: max total readahead window set to 508k
md4: 1 data-disks, max readahead per data-disk: 508k
raid1: device hdc7 operational as mirror 1
raid1: device hda7 operational as mirror 0
raid1: raid set md4 active with 2 out of 2 mirrors
md: updating md4 RAID superblock on device
md: hdc7 [events: 0000003f]<6>(write) hdc7''s sb offset: 14707392
md: hda7 [events: 0000003f]<6>(write) hda7''s sb offset: 14707392
[events: 00000000]
md: invalid raid superblock magic on md4
md: md4 has invalid sb, not importing!
md: no nested md device found
md: considering hdc6 ...
md: adding hdc6 ...
md: adding hda6 ...
md: created md3
md: bind<hda6,1>
md: bind<hdc6,2>
md: running: <hdc6><hda6>
md: hdc6''s event counter: 0000003e
md: hda6''s event counter: 0000003e
md: RAID level 1 does not need chunksize! Continuing anyway.
md3: max total readahead window set to 508k
md3: 1 data-disks, max readahead per data-disk: 508k
raid1: device hdc6 operational as mirror 1
raid1: device hda6 operational as mirror 0
raid1: raid set md3 active with 2 out of 2 mirrors
md: updating md3 RAID superblock on device
md: hdc6 [events: 0000003f]<6>(write) hdc6''s sb offset: 14707392
md: hda6 [events: 0000003f]<6>(write) hda6''s sb offset: 14707392
[events: 00000000]
md: invalid raid superblock magic on md3
md: md3 has invalid sb, not importing!
md: no nested md device found
md: considering hdc5 ...
md: adding hdc5 ...
md: adding hda5 ...
md: created md2
md: bind<hda5,1>
md: bind<hdc5,2>
md: running: <hdc5><hda5>
md: hdc5''s event counter: 0000003e
md: hda5''s event counter: 0000003e
md: RAID level 1 does not need chunksize! Continuing anyway.
md2: max total readahead window set to 508k
md2: 1 data-disks, max readahead per data-disk: 508k
raid1: device hdc5 operational as mirror 1
raid1: device hda5 operational as mirror 0
raid1: raid set md2 active with 2 out of 2 mirrors
md: updating md2 RAID superblock on device
md: hdc5 [events: 0000003f]<6>(write) hdc5''s sb offset: 14707392
md: hda5 [events: 0000003f]<6>(write) hda5''s sb offset: 14707392
[events: 55555765]
md: invalid raid superblock magic on md2
md: md2 has invalid sb, not importing!
md: no nested md device found
md: considering hdc3 ...
md: adding hdc3 ...
md: adding hda3 ...
md: created md1
md: bind<hda3,1>
md: bind<hdc3,2>
md: running: <hdc3><hda3>
md: hdc3''s event counter: 0000003e
md: hda3''s event counter: 0000003e
md: RAID level 1 does not need chunksize! Continuing anyway.
md1: max total readahead window set to 508k
md1: 1 data-disks, max readahead per data-disk: 508k
raid1: device hdc3 operational as mirror 1
raid1: device hda3 operational as mirror 0
raid1: raid set md1 active with 2 out of 2 mirrors
md: updating md1 RAID superblock on device
md: hdc3 [events: 0000003f]<6>(write) hdc3''s sb offset: 8401920
md: hda3 [events: 0000003f]<6>(write) hda3''s sb offset: 8401920
[events: 00000000]
md: invalid raid superblock magic on md1
md: md1 has invalid sb, not importing!
md: no nested md device found
md: considering hdc2 ...
md: adding hdc2 ...
md: adding hda2 ...
md: created md0
md: bind<hda2,1>
md: bind<hdc2,2>
md: running: <hdc2><hda2>
md: hdc2''s event counter: 00000047
md: hda2''s event counter: 00000047
md: RAID level 1 does not need chunksize! Continuing anyway.
md0: max total readahead window set to 508k
md0: 1 data-disks, max readahead per data-disk: 508k
raid1: device hdc2 operational as mirror 1
raid1: device hda2 operational as mirror 0
raid1: raid set md0 active with 2 out of 2 mirrors
md: updating md0 RAID superblock on device
md: hdc2 [events: 00000048]<6>(write) hdc2''s sb offset: 8401920
md: hda2 [events: 00000048]<6>(write) hda2''s sb offset: 8401920
[events: 52a6545b]
md: invalid raid superblock magic on md0
md: md0 has invalid sb, not importing!
md: no nested md device found
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 373k freed
VFS: Mounted root (ext2 filesystem).
Loading module ataraid ...
insmod: ataraid: no module by that name found
EXT2-fs warning (device md(9,2)): ext2_read_super: mounting ext3 filesystem as
ext2
VFS: Mounted root (ext2 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 160k freed
INIT: version 2.82 booting
Running /etc/init.d/boot
Mounting /proc device
------------------------------------------------------------------------
--
"What is this talk of "release"? Klingons do not make software
"releases". Our software "escapes" leaving a bloody trail
of
designers and quality assurance people in its wake."
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users