I cannot boot my xen 3.0 master. It hangs on system startup:
mptbase: Initiating ioc0 bringup
ioc0: 53c130: Capabilities={Initiator}
mptbase: Initiating ioc0 recovery
qla2300 0000.04.02.0: Mailbox command timeout occured. Issuing ISP abort.
qla2300 0000.04.02.0: Performing ISP error recovery - ha= c7e58254.
qla2300 0000.04.02.0: LIP reset occured (f7f7).
qla2300 0000.04.02.0: LOOP UP detected (2Gbps).
qla2300 0000.04.02.0: scs(0:1:0) Abort command issued -- 2 2003
scsi: Device offlined - not reade after error recovery. host 2 channel 0 id 0
lun 0
mptscsih: ioc0. >> Attemting task abort! (sc=c7fef200)
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
With standard kernel the system starts up without any problems. Here the used
kernel modules:
Module Size Used by
ipv6 329728 12
edd 26848 0
tg3 118276 0
generic 20740 0 [permanent]
ide_core 148816 1 generic
i2c_i801 25100 0
i2c_core 37632 1 i2c_i801
ehci_hcd 51592 0
hw_random 21780 0
uhci_hcd 51856 0
usbcore 139392 3 ehci_hcd,uhci_hcd
parport_pc 57668 0
lp 28068 0
parport 52680 2 parport_pc,lp
dm_mod 75292 1
reiserfs 281712 1
processor 44648 0
st 57120 0
qla2300 140672 0
qla2xxx 141020 8 qla2300
firmware_class 26624 1 qla2xxx
scsi_transport_fc 44800 1 qla2xxx
mptspi 25096 0
mptscsih 52692 1 mptspi
mptbase 61024 2 mptspi,mptscsih
sg 54816 0
sr_mod 33572 1
cdrom 55200 1 sr_mod
ata_piix 26244 1
libata 69252 1 ata_piix
sd_mod 36096 13
scsi_mod 155240 9 st,qla2xxx,scsi_transport_fc,mptspi,mptscsih,sg,
sr_mod,libata,sd_mod
Is this a well known problem? Do someone know a workarround?
Stephan
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users