Stephan Böni
2005-Sep-27 14:41 UTC
AW: [Xen-users] invalid network interface after starting xend
> -----Ursprüngliche Nachricht----- > Von: Ted Kaczmarek [mailto:tedkaz@optonline.net] > Gesendet: Dienstag, 27. September 2005 16:18 > An: Xen-Users > Betreff: Re: [Xen-users] invalid network interface after starting xend > > > On Tue, 2005-09-27 at 15:44 +0200, Stephan Böni wrote: > > Before starting xend (xen 3.0) these are my correct network > interfaces: > > > > eth0 Link encap:Ethernet HWaddr 00:14:5E:0A:53:04 > > inet addr:192.168.1.51 Bcast:192.168.1.255 > Mask:255.255.255.0 > > > > eth1 Link encap:Ethernet HWaddr 00:14:5E:0A:53:05 > > inet addr:192.168.1.52 Bcast:192.168.1.255 > Mask:255.255.255.0 > > > > lo Link encap:Local Loopback > > inet addr:127.0.0.1 Mask:255.0.0.0 > > > > After starting xend i have some ungly interfaces: > > > > eth1 Link encap:Ethernet HWaddr 00:14:5E:0A:53:05 > > inet addr:192.168.1.52 Bcast:192.168.1.255 > Mask:255.255.255.0 > > > > lo Link encap:Local Loopback > > inet addr:127.0.0.1 Mask:255.0.0.0 > > > > peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF > > UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1 > > > > vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > xen-br0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > Where is going my eth0 interface? And what is this funny > > peth0 interface with this wrong mac address? > > > > > I have been seeing similar issues as well, trying to use more > than 1 nic > on a domU with unstable has not been possible for me. If you > really want > to crash a domU quick, try to add a vlan to your dom0 and > domU share on > a second nic :-)I have no domU started (only Dom0 is running).> From what I have observed you also can't bring a new interface online > after xend has started as well. Meaning add a new ethernet to > dom0 than > try to get a domU interface to bridge to it.The first interface eth0 with mac address 00:14:5E:0A:53:04 is correct and works fine. After starting xend it has gone, replaced bei peth0 with the mac address FE:FF:FF:FF:FF:FF.> What makes you think the peth0 has the wrong mac address?peth0 should be a physical interface, isn't it? Or do you don't have any physical interfaces? how shows your ifconfig completly?> On my unstable > > peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF > inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link > UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1 > RX packets:382176 errors:0 dropped:0 overruns:0 frame:0 > TX packets:359951 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:290578836 (277.1 MiB) TX bytes:194010196 > (185.0 MiB) > Interrupt:18 Base address:0x1c00 > > [root@inyoureyes mail]# brctl show > bridge name bridge id STP enabled interfaces > xen-br0 8000.feffffffffff no peth0 > vif0.0 > vif1.1 > vif2.1 > vif3.1 > vif4.1 > vif5.1 > vif6.1 > vif8.1 >Well, and does this work? Because in my configuration it does not. Stephan _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users