I''m using the latest unstable source. Dom0 comes up fine. But when I create a new domain with kernel 2.6.12-xenU, it hangs at boot. I see the following debugging messages: do_xenbus_probe> connect backends... xenbus [DBG] xenbus_probe_devices> path=device xenbus [DBG] xenbus_probe_device_type> dirpath=device typename=console xenbus [DBG] xenbus_probe_device> dir=device/console name=0 XENBUS: Registering device console-0 xenbus [DBG] xenbus_probe_device< err=0 xenbus [DBG] xenbus_probe_device_type< err=0 xenbus [DBG] xenbus_probe_device_type> dirpath=device typename=vbd xenbus [DBG] xenbus_probe_device> dir=device/vbd name=0 XENBUS: Registering device vbd-0 xenbus [DBG] xenbus_probe_device< err=0 xenbus [DBG] xenbus_probe_deviceenbus [DBG] xenbus_probe_device< err=0 xenbus [DBG] xenbus_> dir=device/vbd name=1 XENBUS: Registering device vbd-1 xprobe_device_type< err=0 xenbus [DBG] xenbus_probe_device_type> dirpath=device typename=vif xenbus [DBG] xenbus_probe_device> dir=device/vif name=0 XENBUS: Registering device vif-0 xenbus [DBG] xenbus_probe_device< err=0 xenbus [DBG] xenbus_probe_device_type< err=0 XENBUS xs_read_watch: 0 xenbus [DBG] xenbus_probe_devices< err=0 xenbus [DBG] xenbus_probe_backends> path=backend XENBUS xs_read_watch: 0 xenbus [DBG] xenbus_probe_backends< err=-2 Does the last line (err = -2) indicate some problem? After these messages, the kernel goes forward, but finally freezes before it tries to fsck the disks and add swap. My machine is a P3 SMP and I use loopback files as hard disks for domU. Has anyone seen this problem before? Thanks! _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com lists.xensource.com/xen-users