I can''t figure this one out: 1 memory = 1024 2 name = "w" 3 vcpus = 2 4 vif = [ ''type=ioemu,bridge=lan'' ] 5 disk = [ 6 |····''tap:aio:/dev/vg/win,hda,w'', 7 |····''tap:aio:/dev/vg/swap,hdb,w'' 9 ] 10 usbdevice=''tablet'' 11 kernel = "/usr/lib64/xen/boot/hvmloader" 12 builder=''hvm'' 13 boot="dc" 14 vnc=''1'' 15 vncpassword='''' 16 vnclisten=''192.168.123.2'' 17 sdl=''0'' 18 #on_crash=''preserve'' 19 keymap=''nl-be'' 20 21 localtime=1 If i remove line 4 it boots just fine, if i keep it: xm create w7 Using config file "./w7". Error: Domain ''w7'' does not exist. If i preserve it, (and start it pauzed so create.py doesn''t kill it); xm list shows it is crashed. Any suggestions ? i''m clueless right about now. Thank you, Killian De Volder _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Finally, just found a usefull error output: tun/tap not compiled in kernel or module.> I can''t figure this one out: > > 1 memory = 1024 > 2 name = "w" > 3 vcpus = 2 > 4 vif = [ ''type=ioemu,bridge=lan'' ] > 5 disk = [ > 6 |····''tap:aio:/dev/vg/win,hda,w'', > 7 |····''tap:aio:/dev/vg/swap,hdb,w'' > 9 ] > 10 usbdevice=''tablet'' > 11 kernel = "/usr/lib64/xen/boot/hvmloader" > 12 builder=''hvm'' > 13 boot="dc" > 14 vnc=''1'' > 15 vncpassword='''' > 16 vnclisten=''192.168.123.2'' > 17 sdl=''0'' > 18 #on_crash=''preserve'' > 19 keymap=''nl-be'' > 20 > 21 localtime=1 > > If i remove line 4 it boots just fine, if i keep it: > > xm create w7 > Using config file "./w7". > Error: Domain ''w7'' does not exist. > > If i preserve it, (and start it pauzed so create.py doesn''t kill it); > xm list shows it is crashed. > > Any suggestions ? i''m clueless right about now. > > Thank you, > Killian De Volder > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Version of Xen Hypervisor ? Boris. --- On Sun, 11/22/09, Killian De Volder <killian.de.volder@scarlet.be> wrote: From: Killian De Volder <killian.de.volder@scarlet.be> Subject: Re: [Xen-devel] Xen: cannot start HVM with VIF To: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> Date: Sunday, November 22, 2009, 2:35 AM Finally, just found a usefull error output: tun/tap not compiled in kernel or module.> I can''t figure this one out: > > 1 memory = 1024 > 2 name = "w" > 3 vcpus = 2 > 4 vif = [ ''type=ioemu,bridge=lan'' ] > 5 disk = [ > 6 |····''tap:aio:/dev/vg/win,hda,w'', > 7 |····''tap:aio:/dev/vg/swap,hdb,w'' > 9 ] > 10 usbdevice=''tablet'' > 11 kernel = "/usr/lib64/xen/boot/hvmloader" > 12 builder=''hvm'' > 13 boot="dc" > 14 vnc=''1'' > 15 vncpassword='''' > 16 vnclisten=''192.168.123.2'' > 17 sdl=''0'' > 18 #on_crash=''preserve'' > 19 keymap=''nl-be'' > 20 > 21 localtime=1 > > If i remove line 4 it boots just fine, if i keep it: > > xm create w7 > Using config file "./w7". > Error: Domain ''w7'' does not exist. > > If i preserve it, (and start it pauzed so create.py doesn''t kill it); > xm list shows it is crashed. > > Any suggestions ? i''m clueless right about now. > > Thank you, > Killian De Volder > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Sorry for not beeing clear earlier: "Finally" i meant, i finally solved it. I got myself the tun/tap module and it worked. Thanks for the reply though.> Version of Xen Hypervisor ? > > Boris. > > --- On *Sun, 11/22/09, Killian De Volder > /<killian.de.volder@scarlet.be>/* wrote: > > > From: Killian De Volder <killian.de.volder@scarlet.be> > Subject: Re: [Xen-devel] Xen: cannot start HVM with VIF > To: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com> > Date: Sunday, November 22, 2009, 2:35 AM > > Finally, just found a usefull error output: tun/tap not compiled in > kernel or module. > > I can''t figure this one out: > > > > 1 memory = 1024 > > 2 name = "w" > > 3 vcpus = 2 > > 4 vif = [ ''type=ioemu,bridge=lan'' ] > > 5 disk = [ > > 6 |····''tap:aio:/dev/vg/win,hda,w'', > > 7 |····''tap:aio:/dev/vg/swap,hdb,w'' > > 9 ] > > 10 usbdevice=''tablet'' > > 11 kernel = "/usr/lib64/xen/boot/hvmloader" > > 12 builder=''hvm'' > > 13 boot="dc" > > 14 vnc=''1'' > > 15 vncpassword='''' > > 16 vnclisten=''192.168.123.2'' > > 17 sdl=''0'' > > 18 #on_crash=''preserve'' > > 19 keymap=''nl-be'' > > 20 > > 21 localtime=1 > > > > If i remove line 4 it boots just fine, if i keep it: > > > > xm create w7 > > Using config file "./w7". > > Error: Domain ''w7'' does not exist. > > > > If i preserve it, (and start it pauzed so create.py doesn''t kill > it); > > xm list shows it is crashed. > > > > Any suggestions ? i''m clueless right about now. > > > > Thank you, > > Killian De Volder > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > </mc/compose?to=Xen-devel@lists.xensource.com> > > http://lists.xensource.com/xen-devel > > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > </mc/compose?to=Xen-devel@lists.xensource.com> > http://lists.xensource.com/xen-devel > >< _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel