Hi, I built xapi build appliance VM by following the instruction as: http://xenbits.xen.org/xapi/install.html Everything looks OK until I run: # ./build-xapi-toolstack.sh It stops at: ... Building xapi-specific libraries Make: *** No rule to make target ''clean''. Stop. Please advise. Thanks. Tony Z. Wei Senior Release Engineer Marathon Technologies Corp. 295 Foster Street Littleton, MA 01460 (v) 978.489.1118 (f) 978.489.1101 twei@marathontechnologies.com <mailto:utwei@marathontechnologies.com> www.marathontechnologies.com <http://www.marathontechnologies.com/> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Tony Wei wrote:> > Hi, I built xapi build appliance VM by following the instruction as: > > > > http://xenbits.xen.org/xapi/install.html > > > > Everything looks OK until I run: > > > > # ./build-xapi-toolstack.sh > > > > It stops at: > > > > … > > Building xapi-specific libraries > > Make: *** No rule to make target ‘clean’. Stop. > > > > Please advise. Thanks. >Not sure that will fix it but you can try adding just before the ./rebuild step line 28 in the build-xapi-toolstack.sh script: sh autogen.sh ./configure the script should look like: ... echo "Building xapi-specific libraries" cd $REPO/xen-api-libs.hg sh autogen.sh ./configure ./rebuild echo "Building xapi toolstack" ... -- Vincent Hanquez _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Hi Vincent, I modified the script as you suggested and ran it in a brand-new buildvm. It still failed and I got the following error messages (plus the previous errors): ========================================================================================= make[5]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' Makefile:129: depend: No such file or directory ...... File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) rm -f /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot Makefile.dep make[4]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' Makefile:909: Makefile.dep: No such file or directory ....... Building xapi-specific libraries autogen.sh: line 2: autoreconf: command not found ========================================================================================= By the way, instead of installing a host with a pre-built xapi toolstack, I used an XenServer 5.0.0 to host buildvm, is it OK? Your early assistance is highly appreciated! Tony -----Original Message----- From: Vincent Hanquez [mailto:vincent.hanquez@eu.citrix.com] Sent: Monday, November 16, 2009 1:07 PM To: Tony Wei Cc: xen-devel@lists.xensource.com; Dave Scott Subject: Re: [Xen-devel] xen-api installation problem Tony Wei wrote:> > Hi, I built xapi build appliance VM by following the instruction as: > > > > http://xenbits.xen.org/xapi/install.html > > > > Everything looks OK until I run: > > > > # ./build-xapi-toolstack.sh > > > > It stops at: > > > > ... > > Building xapi-specific libraries > > Make: *** No rule to make target ''clean''. Stop. > > > > Please advise. Thanks. >Not sure that will fix it but you can try adding just before the ./rebuild step line 28 in the build-xapi-toolstack.sh script: sh autogen.sh ./configure the script should look like: ... echo "Building xapi-specific libraries" cd $REPO/xen-api-libs.hg sh autogen.sh ./configure ./rebuild echo "Building xapi toolstack" ... -- Vincent Hanquez _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Hi Tony, (added ''[XCP]'' to subject) It turns out there are two problems: 1. the missing ''sh autogen.sh; configure'' that Vincent pointed out (thanks!) 2. the fact that the autoconf and automake packages are missing in the current build VM I''ve added fixes/workarounds for both of these into the build script http://xenbits.xen.org/xapi/build-xapi-toolstack.sh Could you re-clone a fresh build VM and try again? Clearly we need to do a bit of work on our ''build system'' :-) Cheers, Dave -----Original Message----- From: Tony Wei [mailto:twei@marathontechnologies.com] Sent: 17 November 2009 16:51 To: Vincent Hanquez Cc: xen-devel@lists.xensource.com; Dave Scott; Roger Cruz Subject: RE: [Xen-devel] xen-api installation problem Hi Vincent, I modified the script as you suggested and ran it in a brand-new buildvm. It still failed and I got the following error messages (plus the previous errors): ========================================================================================= make[5]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' Makefile:129: depend: No such file or directory ...... File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) rm -f /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot Makefile.dep make[4]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' Makefile:909: Makefile.dep: No such file or directory ....... Building xapi-specific libraries autogen.sh: line 2: autoreconf: command not found ========================================================================================= By the way, instead of installing a host with a pre-built xapi toolstack, I used an XenServer 5.0.0 to host buildvm, is it OK? Your early assistance is highly appreciated! Tony -----Original Message----- From: Vincent Hanquez [mailto:vincent.hanquez@eu.citrix.com] Sent: Monday, November 16, 2009 1:07 PM To: Tony Wei Cc: xen-devel@lists.xensource.com; Dave Scott Subject: Re: [Xen-devel] xen-api installation problem Tony Wei wrote:> > Hi, I built xapi build appliance VM by following the instruction as: > > > > http://xenbits.xen.org/xapi/install.html > > > > Everything looks OK until I run: > > > > # ./build-xapi-toolstack.sh > > > > It stops at: > > > > ... > > Building xapi-specific libraries > > Make: *** No rule to make target ''clean''. Stop. > > > > Please advise. Thanks. >Not sure that will fix it but you can try adding just before the ./rebuild step line 28 in the build-xapi-toolstack.sh script: sh autogen.sh ./configure the script should look like: ... echo "Building xapi-specific libraries" cd $REPO/xen-api-libs.hg sh autogen.sh ./configure ./rebuild echo "Building xapi toolstack" ... -- Vincent Hanquez _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Hi, I gto autoconf package by following the way you showed below, and run the script again. Unfortunately, I got the following new errors when it starts to run autoreconf: Building xapi-specific libraries Can''t exec "aclocal": No such file or directory at /usr/bin/autoreconf line 174. Use of uninitialized value in pattern match (m//) at /usr/bin/autoreconf line 174. Can''t exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 288. autoreconf: failed to run aclocal: No such file or directory By the way, the previous errors still exist: make[5]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' Makefile:129: depend: No such file or directory ...... File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) rm -f /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot Makefile.dep make[4]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' Makefile:909: Makefile.dep: No such file or directory -----Original Message----- From: Dave Scott [mailto:Dave.Scott@eu.citrix.com] Sent: Tuesday, November 17, 2009 6:20 PM To: Tony Wei; Vincent Hanquez Cc: xen-devel@lists.xensource.com; Roger Cruz Subject: [XCP] RE: [Xen-devel] xen-api installation problem Hi Tony, (added ''[XCP]'' to subject) It turns out there are two problems: 1. the missing ''sh autogen.sh; configure'' that Vincent pointed out (thanks!) 2. the fact that the autoconf and automake packages are missing in the current build VM I''ve added fixes/workarounds for both of these into the build script http://xenbits.xen.org/xapi/build-xapi-toolstack.sh Could you re-clone a fresh build VM and try again? Clearly we need to do a bit of work on our ''build system'' :-) Cheers, Dave -----Original Message----- From: Tony Wei [mailto:twei@marathontechnologies.com] Sent: 17 November 2009 16:51 To: Vincent Hanquez Cc: xen-devel@lists.xensource.com; Dave Scott; Roger Cruz Subject: RE: [Xen-devel] xen-api installation problem Hi Vincent, I modified the script as you suggested and ran it in a brand-new buildvm. It still failed and I got the following error messages (plus the previous errors): ========================================================================================= make[5]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' Makefile:129: depend: No such file or directory ...... File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) rm -f /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot Makefile.dep make[4]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' Makefile:909: Makefile.dep: No such file or directory ....... Building xapi-specific libraries autogen.sh: line 2: autoreconf: command not found ========================================================================================= By the way, instead of installing a host with a pre-built xapi toolstack, I used an XenServer 5.0.0 to host buildvm, is it OK? Your early assistance is highly appreciated! Tony -----Original Message----- From: Vincent Hanquez [mailto:vincent.hanquez@eu.citrix.com] Sent: Monday, November 16, 2009 1:07 PM To: Tony Wei Cc: xen-devel@lists.xensource.com; Dave Scott Subject: Re: [Xen-devel] xen-api installation problem Tony Wei wrote:> > Hi, I built xapi build appliance VM by following the instruction as: > > > > http://xenbits.xen.org/xapi/install.html > > > > Everything looks OK until I run: > > > > # ./build-xapi-toolstack.sh > > > > It stops at: > > > > ... > > Building xapi-specific libraries > > Make: *** No rule to make target ''clean''. Stop. > > > > Please advise. Thanks. >Not sure that will fix it but you can try adding just before the ./rebuild step line 28 in the build-xapi-toolstack.sh script: sh autogen.sh ./configure the script should look like: ... echo "Building xapi-specific libraries" cd $REPO/xen-api-libs.hg sh autogen.sh ./configure ./rebuild echo "Building xapi toolstack" ... -- Vincent Hanquez _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Hi, You''re still missing ''aclocal'' which I think is part of the ''automake'' package -- try installing that as well as ''autoconf''. The updated build script (http://xenbits.xen.org/xapi/build-xapi-toolstack.sh) should do this for you. If you''re still having trouble, try a re-clone of the VM plus a fresh copy of the build script. I think the other errors are harmless. Cheers, Dave -----Original Message----- From: Tony Wei [mailto:twei@marathontechnologies.com] Sent: 17 November 2009 23:27 To: Dave Scott; Vincent Hanquez Cc: xen-devel@lists.xensource.com; Roger Cruz; Mike Schwartz Subject: RE: [XCP] RE: [Xen-devel] xen-api installation problem Hi, I gto autoconf package by following the way you showed below, and run the script again. Unfortunately, I got the following new errors when it starts to run autoreconf: Building xapi-specific libraries Can''t exec "aclocal": No such file or directory at /usr/bin/autoreconf line 174. Use of uninitialized value in pattern match (m//) at /usr/bin/autoreconf line 174. Can''t exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 288. autoreconf: failed to run aclocal: No such file or directory By the way, the previous errors still exist: make[5]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' Makefile:129: depend: No such file or directory ...... File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) rm -f /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot Makefile.dep make[4]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' Makefile:909: Makefile.dep: No such file or directory -----Original Message----- From: Dave Scott [mailto:Dave.Scott@eu.citrix.com] Sent: Tuesday, November 17, 2009 6:20 PM To: Tony Wei; Vincent Hanquez Cc: xen-devel@lists.xensource.com; Roger Cruz Subject: [XCP] RE: [Xen-devel] xen-api installation problem Hi Tony, (added ''[XCP]'' to subject) It turns out there are two problems: 1. the missing ''sh autogen.sh; configure'' that Vincent pointed out (thanks!) 2. the fact that the autoconf and automake packages are missing in the current build VM I''ve added fixes/workarounds for both of these into the build script http://xenbits.xen.org/xapi/build-xapi-toolstack.sh Could you re-clone a fresh build VM and try again? Clearly we need to do a bit of work on our ''build system'' :-) Cheers, Dave -----Original Message----- From: Tony Wei [mailto:twei@marathontechnologies.com] Sent: 17 November 2009 16:51 To: Vincent Hanquez Cc: xen-devel@lists.xensource.com; Dave Scott; Roger Cruz Subject: RE: [Xen-devel] xen-api installation problem Hi Vincent, I modified the script as you suggested and ran it in a brand-new buildvm. It still failed and I got the following error messages (plus the previous errors): ========================================================================================= make[5]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' Makefile:129: depend: No such file or directory ...... File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) rm -f /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot Makefile.dep make[4]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' Makefile:909: Makefile.dep: No such file or directory ....... Building xapi-specific libraries autogen.sh: line 2: autoreconf: command not found ========================================================================================= By the way, instead of installing a host with a pre-built xapi toolstack, I used an XenServer 5.0.0 to host buildvm, is it OK? Your early assistance is highly appreciated! Tony -----Original Message----- From: Vincent Hanquez [mailto:vincent.hanquez@eu.citrix.com] Sent: Monday, November 16, 2009 1:07 PM To: Tony Wei Cc: xen-devel@lists.xensource.com; Dave Scott Subject: Re: [Xen-devel] xen-api installation problem Tony Wei wrote:> > Hi, I built xapi build appliance VM by following the instruction as: > > > > http://xenbits.xen.org/xapi/install.html > > > > Everything looks OK until I run: > > > > # ./build-xapi-toolstack.sh > > > > It stops at: > > > > ... > > Building xapi-specific libraries > > Make: *** No rule to make target ''clean''. Stop. > > > > Please advise. Thanks. >Not sure that will fix it but you can try adding just before the ./rebuild step line 28 in the build-xapi-toolstack.sh script: sh autogen.sh ./configure the script should look like: ... echo "Building xapi-specific libraries" cd $REPO/xen-api-libs.hg sh autogen.sh ./configure ./rebuild echo "Building xapi toolstack" ... -- Vincent Hanquez _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Hi I made a fresh VM and run the new script and got a better result though some errors exist as follows: File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) Tony -----Original Message----- From: Dave Scott [mailto:Dave.Scott@eu.citrix.com] Sent: Tuesday, November 17, 2009 6:36 PM To: Tony Wei; Vincent Hanquez Cc: xen-devel@lists.xensource.com; Roger Cruz; Mike Schwartz Subject: RE: [XCP] RE: [Xen-devel] xen-api installation problem Hi, You''re still missing ''aclocal'' which I think is part of the ''automake'' package -- try installing that as well as ''autoconf''. The updated build script (http://xenbits.xen.org/xapi/build-xapi-toolstack.sh) should do this for you. If you''re still having trouble, try a re-clone of the VM plus a fresh copy of the build script. I think the other errors are harmless. Cheers, Dave -----Original Message----- From: Tony Wei [mailto:twei@marathontechnologies.com] Sent: 17 November 2009 23:27 To: Dave Scott; Vincent Hanquez Cc: xen-devel@lists.xensource.com; Roger Cruz; Mike Schwartz Subject: RE: [XCP] RE: [Xen-devel] xen-api installation problem Hi, I gto autoconf package by following the way you showed below, and run the script again. Unfortunately, I got the following new errors when it starts to run autoreconf: Building xapi-specific libraries Can''t exec "aclocal": No such file or directory at /usr/bin/autoreconf line 174. Use of uninitialized value in pattern match (m//) at /usr/bin/autoreconf line 174. Can''t exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 288. autoreconf: failed to run aclocal: No such file or directory By the way, the previous errors still exist: make[5]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' Makefile:129: depend: No such file or directory ...... File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) rm -f /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot Makefile.dep make[4]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' Makefile:909: Makefile.dep: No such file or directory -----Original Message----- From: Dave Scott [mailto:Dave.Scott@eu.citrix.com] Sent: Tuesday, November 17, 2009 6:20 PM To: Tony Wei; Vincent Hanquez Cc: xen-devel@lists.xensource.com; Roger Cruz Subject: [XCP] RE: [Xen-devel] xen-api installation problem Hi Tony, (added ''[XCP]'' to subject) It turns out there are two problems: 1. the missing ''sh autogen.sh; configure'' that Vincent pointed out (thanks!) 2. the fact that the autoconf and automake packages are missing in the current build VM I''ve added fixes/workarounds for both of these into the build script http://xenbits.xen.org/xapi/build-xapi-toolstack.sh Could you re-clone a fresh build VM and try again? Clearly we need to do a bit of work on our ''build system'' :-) Cheers, Dave -----Original Message----- From: Tony Wei [mailto:twei@marathontechnologies.com] Sent: 17 November 2009 16:51 To: Vincent Hanquez Cc: xen-devel@lists.xensource.com; Dave Scott; Roger Cruz Subject: RE: [Xen-devel] xen-api installation problem Hi Vincent, I modified the script as you suggested and ran it in a brand-new buildvm. It still failed and I got the following error messages (plus the previous errors): ========================================================================================= make[5]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' Makefile:129: depend: No such file or directory ...... File "omake_gen_magic.ml", line 83, characters 14-33: Error: Unbound value Lm_string_util.trim make[5]: *** [omake_gen_magic.cmo] Error 2 make[5]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' make[4]: *** [boot] Error 2 make[4]: Leaving directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 (ignored) rm -f /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot Makefile.dep make[4]: Entering directory `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' Makefile:909: Makefile.dep: No such file or directory ....... Building xapi-specific libraries autogen.sh: line 2: autoreconf: command not found ========================================================================================= By the way, instead of installing a host with a pre-built xapi toolstack, I used an XenServer 5.0.0 to host buildvm, is it OK? Your early assistance is highly appreciated! Tony -----Original Message----- From: Vincent Hanquez [mailto:vincent.hanquez@eu.citrix.com] Sent: Monday, November 16, 2009 1:07 PM To: Tony Wei Cc: xen-devel@lists.xensource.com; Dave Scott Subject: Re: [Xen-devel] xen-api installation problem Tony Wei wrote:> > Hi, I built xapi build appliance VM by following the instruction as: > > > > http://xenbits.xen.org/xapi/install.html > > > > Everything looks OK until I run: > > > > # ./build-xapi-toolstack.sh > > > > It stops at: > > > > ... > > Building xapi-specific libraries > > Make: *** No rule to make target ''clean''. Stop. > > > > Please advise. Thanks. >Not sure that will fix it but you can try adding just before the ./rebuild step line 28 in the build-xapi-toolstack.sh script: sh autogen.sh ./configure the script should look like: ... echo "Building xapi-specific libraries" cd $REPO/xen-api-libs.hg sh autogen.sh ./configure ./rebuild echo "Building xapi toolstack" ... -- Vincent Hanquez _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Anil Madhavapeddy
2009-Nov-18 02:41 UTC
Re: [XCP] RE: [Xen-devel] xen-api installation problem
That error is due to bad dependencies in the omake build process, and was ignored deliberately by the wrapper Makefile in xen-dist-ocaml.hg. Did it actually cause you any problems? -anil On 17 Nov 2009, at 15:47, Tony Wei wrote:> Hi I made a fresh VM and run the new script and got a better result > though some errors exist as follows: > > File "omake_gen_magic.ml", line 83, characters 14-33: > Error: Unbound value Lm_string_util.trim > make[5]: *** [omake_gen_magic.cmo] Error 2 > make[5]: Leaving directory > `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' > make[4]: *** [boot] Error 2 > make[4]: Leaving directory > `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' > make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 > (ignored) > > Tony > > -----Original Message----- > From: Dave Scott [mailto:Dave.Scott@eu.citrix.com] > Sent: Tuesday, November 17, 2009 6:36 PM > To: Tony Wei; Vincent Hanquez > Cc: xen-devel@lists.xensource.com; Roger Cruz; Mike Schwartz > Subject: RE: [XCP] RE: [Xen-devel] xen-api installation problem > > Hi, > > You''re still missing ''aclocal'' which I think is part of the ''automake'' > package -- try installing that as well as ''autoconf''. > > The updated build script > (http://xenbits.xen.org/xapi/build-xapi-toolstack.sh) should do this for > you. If you''re still having trouble, try a re-clone of the VM plus a > fresh copy of the build script. > > I think the other errors are harmless. > > Cheers, > Dave > > -----Original Message----- > From: Tony Wei [mailto:twei@marathontechnologies.com] > Sent: 17 November 2009 23:27 > To: Dave Scott; Vincent Hanquez > Cc: xen-devel@lists.xensource.com; Roger Cruz; Mike Schwartz > Subject: RE: [XCP] RE: [Xen-devel] xen-api installation problem > > Hi, I gto autoconf package by following the way you showed below, and > run the script again. Unfortunately, I got the following new errors when > it starts to run autoreconf: > > Building xapi-specific libraries > Can''t exec "aclocal": No such file or directory at /usr/bin/autoreconf > line 174. > Use of uninitialized value in pattern match (m//) at /usr/bin/autoreconf > line 174. > Can''t exec "aclocal": No such file or directory at > /usr/share/autoconf/Autom4te/FileUtils.pm line 288. > autoreconf: failed to run aclocal: No such file or directory > > By the way, the previous errors still exist: > > make[5]: Entering directory > `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' > Makefile:129: depend: No such file or directory > > ...... > > File "omake_gen_magic.ml", line 83, characters 14-33: > Error: Unbound value Lm_string_util.trim > make[5]: *** [omake_gen_magic.cmo] Error 2 > make[5]: Leaving directory > `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' > make[4]: *** [boot] Error 2 > make[4]: Leaving directory > `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' > make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 > (ignored) > rm -f > /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep > make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot > Makefile.dep > make[4]: Entering directory > `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' > Makefile:909: Makefile.dep: No such file or directory > > > > -----Original Message----- > From: Dave Scott [mailto:Dave.Scott@eu.citrix.com] > Sent: Tuesday, November 17, 2009 6:20 PM > To: Tony Wei; Vincent Hanquez > Cc: xen-devel@lists.xensource.com; Roger Cruz > Subject: [XCP] RE: [Xen-devel] xen-api installation problem > > Hi Tony, > > (added ''[XCP]'' to subject) > > It turns out there are two problems: > 1. the missing ''sh autogen.sh; configure'' that Vincent pointed out > (thanks!) > 2. the fact that the autoconf and automake packages are missing in the > current build VM > > I''ve added fixes/workarounds for both of these into the build script > http://xenbits.xen.org/xapi/build-xapi-toolstack.sh > > Could you re-clone a fresh build VM and try again? > > Clearly we need to do a bit of work on our ''build system'' :-) > > Cheers, > Dave > > -----Original Message----- > From: Tony Wei [mailto:twei@marathontechnologies.com] > Sent: 17 November 2009 16:51 > To: Vincent Hanquez > Cc: xen-devel@lists.xensource.com; Dave Scott; Roger Cruz > Subject: RE: [Xen-devel] xen-api installation problem > > Hi Vincent, > > I modified the script as you suggested and ran it in a brand-new > buildvm. It still failed and I got the following error messages (plus > the previous errors): > > =======================================================================> ==================> > make[5]: Entering directory > `/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'' > Makefile:129: depend: No such file or directory > > ...... > > File "omake_gen_magic.ml", line 83, characters 14-33: > Error: Unbound value Lm_string_util.trim > make[5]: *** [omake_gen_magic.cmo] Error 2 > make[5]: Leaving directory > `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' > make[4]: *** [boot] Error 2 > make[4]: Leaving directory > `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'' > make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2 > (ignored) > rm -f > /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep > make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot > Makefile.dep > make[4]: Entering directory > `/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'' > Makefile:909: Makefile.dep: No such file or directory > > ....... > > Building xapi-specific libraries > autogen.sh: line 2: autoreconf: command not found > > =======================================================================> ==================> > By the way, instead of installing a host with a pre-built xapi > toolstack, I used an XenServer 5.0.0 to host buildvm, is it OK? > > Your early assistance is highly appreciated! > > Tony > > > -----Original Message----- > From: Vincent Hanquez [mailto:vincent.hanquez@eu.citrix.com] > Sent: Monday, November 16, 2009 1:07 PM > To: Tony Wei > Cc: xen-devel@lists.xensource.com; Dave Scott > Subject: Re: [Xen-devel] xen-api installation problem > > Tony Wei wrote: >> >> Hi, I built xapi build appliance VM by following the instruction as: >> >> >> >> http://xenbits.xen.org/xapi/install.html >> >> >> >> Everything looks OK until I run: >> >> >> >> # ./build-xapi-toolstack.sh >> >> >> >> It stops at: >> >> >> >> ... >> >> Building xapi-specific libraries >> >> Make: *** No rule to make target ''clean''. Stop. >> >> >> >> Please advise. Thanks. >> > Not sure that will fix it but you can try adding just before the > ./rebuild step line 28 in the build-xapi-toolstack.sh script: > > sh autogen.sh > ./configure > > the script should look like: > > ... > echo "Building xapi-specific libraries" > cd $REPO/xen-api-libs.hg > sh autogen.sh > ./configure > ./rebuild > echo "Building xapi toolstack" > ... > > -- > Vincent Hanquez > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel