Mr. Teo En Ming (Zhang Enming)
2009-Sep-07 14:00 UTC
RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
OK I have just reached home after work. >Teo, >Please can you post your >1) lspci output from Dom0 for your VGA card 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >2) qemu log for DomU Will post later when I reboot with Serial Console >3) xm dmesg output Will post later when I reboot with Serial Console >4) Modifications you made to vBAR-pBAR patch I did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim. >Thanks Tim Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Tim Moore
2009-Sep-07 14:07 UTC
RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
Hi Teo, Please provide lspci -s 01:00.0 -vv Thanks Tim -----Original Message----- From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 15:00 To: xen-devel@lists.xensource.com; bengheng@eecs.umich.edu Cc: Tim Moore; Han, Weidong Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine OK I have just reached home after work. >Teo, >Please can you post your >1) lspci output from Dom0 for your VGA card 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >2) qemu log for DomU Will post later when I reboot with Serial Console >3) xm dmesg output Will post later when I reboot with Serial Console >4) Modifications you made to vBAR-pBAR patch I did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim. >Thanks Tim Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Mr. Teo En Ming (Zhang Enming)
2009-Sep-07 14:12 UTC
Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
Dear Tim,
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS
(rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at d000 [size=128]
[virtual] Expansion ROM at d3000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
I am using latest nvidia proprietary driver and I compiled the open
source kernel interface against my own kernel.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Company Website: http://www.asiasoft.sg/
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
Alma Maters: Singapore Polytechnic, National University of Singapore
On 09/07/2009 10:07 PM, Tim Moore wrote:> Hi Teo,
>
> Please provide lspci -s 01:00.0 -vv
>
> Thanks
> Tim
>
> -----Original Message-----
> From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net]
> Sent: 07 September 2009 15:00
> To: xen-devel@lists.xensource.com; bengheng@eecs.umich.edu
> Cc: Tim Moore; Han, Weidong
> Subject: RE: [Xen-devel] Video Presentation on PCI Express x16 VGA
PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
>
> OK I have just reached home after work.
>
> >Teo,
>
> >Please can you post your
>
> >1) lspci output from Dom0 for your VGA card
>
> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS
> (rev a1) (prog-if 00 [VGA controller])
>
> 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller])
>
> >2) qemu log for DomU
>
> Will post later when I reboot with Serial Console
>
> >3) xm dmesg output
>
> Will post later when I reboot with Serial Console
>
> >4) Modifications you made to vBAR-pBAR patch
>
> I did not make any modifications to the vbar-pbar patch. I used the 1:1
> map patch as provided by Weidong Intel verbatim.
>
> >Thanks Tim
>
> Thank you.
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Mr. Teo En Ming (Zhang Enming)
2009-Sep-07 14:56 UTC
Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
Hi, Here is my "xm dmesg" output. Important lines have been bolded and underlined. _*(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0*_ (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.5-unstable (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 _*(XEN) HVM1: Make vBAR = pBAR of assigned gfx*_ (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: - GS base MSRs and SWAPGS ... passed (XEN) HVM1: Passed 2 of 2 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done (XEN) HVM1: Creating MP tables ... _*(XEN) HVM1: Loading VGABIOS of passthroughed gfx ...*_ (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc003000-fc01261f (XEN) HVM1: vm86 TSS at fc012800 (XEN) HVM1: BIOS map: _*(XEN) HVM1: c0000-cf7ff: VGA BIOS*_ (XEN) HVM1: cf800-dbfff: Etherboot ROM (XEN) HVM1: eb000-eb175: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote:> OK I have just reached home after work. > > >Teo, > > >Please can you post your > > >1) lspci output from Dom0 for your VGA card > > 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS > (rev a1) (prog-if 00 [VGA controller]) > > 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) > > >2) qemu log for DomU > > Will post later when I reboot with Serial Console > > >3) xm dmesg output > > Will post later when I reboot with Serial Console > > >4) Modifications you made to vBAR-pBAR patch > > I did not make any modifications to the vbar-pbar patch. I used the > 1:1 map patch as provided by Weidong Intel verbatim. > > >Thanks Tim > > Thank you. >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Mr. Teo En Ming (Zhang Enming)
2009-Sep-07 15:02 UTC
Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
Hi Timothy, Are you using the Intel gfx passthrough Version 1 or Version 2 patches? I am still using Version 1 patches. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote:> Hi, > > Here is my "xm dmesg" output. Important lines have been bolded and > underlined. > > _*(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 > (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0*_ > (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c > (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 > (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 > (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v3.5-unstable > (XEN) HVM1: CPU speed is 2800 MHz > (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:2 INTD->IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 02:0 INTA->IRQ11 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > _*(XEN) HVM1: Make vBAR = pBAR of assigned gfx*_ > (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 > (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 > (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 > (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 > (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs > [3/8] ... done. > (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs > [3/8] ... done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done > (XEN) HVM1: Creating MP tables ... > _*(XEN) HVM1: Loading VGABIOS of passthroughed gfx ...*_ > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://etherboot.org > (XEN) HVM1: - Product name: gPXE > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: - Lo data: 000ea020-000ea04f > (XEN) HVM1: - Hi data: fc003000-fc01261f > (XEN) HVM1: vm86 TSS at fc012800 > (XEN) HVM1: BIOS map: > _*(XEN) HVM1: c0000-cf7ff: VGA BIOS*_ > (XEN) HVM1: cf800-dbfff: Etherboot ROM > (XEN) HVM1: eb000-eb175: SMBIOS tables > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) > (XEN) HVM1: IDE time out > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > (XEN) HVM1: IDE time out > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: Press F12 for boot menu. > (XEN) HVM1: > (XEN) HVM1: Booting from Hard Disk... > (XEN) HVM1: Booting from 0000:7c00 > (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 > (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 > (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 > (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 > (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 > > Thank you. > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website:http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN:teoenming@hotmail.com > Alma Maters: Singapore Polytechnic, National University of Singapore > > > On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: >> OK I have just reached home after work. >> >> >Teo, >> >> >Please can you post your >> >> >1) lspci output from Dom0 for your VGA card >> >> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS >> (rev a1) (prog-if 00 [VGA controller]) >> >> 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >> >> >2) qemu log for DomU >> >> Will post later when I reboot with Serial Console >> >> >3) xm dmesg output >> >> Will post later when I reboot with Serial Console >> >> >4) Modifications you made to vBAR-pBAR patch >> >> I did not make any modifications to the vbar-pbar patch. I used the >> 1:1 map patch as provided by Weidong Intel verbatim. >> >> >Thanks Tim >> >> Thank you. >> > >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Mr. Teo En Ming (Zhang Enming)
2009-Sep-07 23:54 UTC
Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
All other things being equal, then it must be the differences between our graphics card. What motherboard are you using? Can you do a video presentation as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 11:45 PM, Tim Moore wrote:> > Version 1 still, > > Kernel 2.6.18 or pvops rc6 worked for me - > > *From:* Mr. Teo En Ming (Zhang Enming) > [mailto:enming.teo@asiasoftsea.net] > *Sent:* 07 September 2009 16:03 > *To:* enming.teo@asiasoftsea.net > *Cc:* xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, > Weidong; Tim Moore > *Subject:* Re: [Xen-devel] Video Presentation on PCI Express x16 VGA > PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine > > > Hi Timothy, > > Are you using the Intel gfx passthrough Version 1 or Version 2 patches? > > I am still using Version 1 patches. > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website:http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN:teoenming@hotmail.com <mailto:teoenming@hotmail.com> > Alma Maters: Singapore Polytechnic, National University of Singapore > > > > On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: > > Hi, > > Here is my "xm dmesg" output. Important lines have been bolded and > underlined. > > *_(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 > (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0_* > (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c > (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 > (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 > (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v3.5-unstable > (XEN) HVM1: CPU speed is 2800 MHz > (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:2 INTD->IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 02:0 INTA->IRQ11 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > *_(XEN) HVM1: Make vBAR = pBAR of assigned gfx_* > (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 > (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 > (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 > (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 > (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs > [3/8] ... done. > (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs > [3/8] ... done. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: - GS base MSRs and SWAPGS ... passed > (XEN) HVM1: Passed 2 of 2 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done > (XEN) HVM1: Creating MP tables ... > *_(XEN) HVM1: Loading VGABIOS of passthroughed gfx ..._* > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://etherboot.org > (XEN) HVM1: - Product name: gPXE > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: - Lo data: 000ea020-000ea04f > (XEN) HVM1: - Hi data: fc003000-fc01261f > (XEN) HVM1: vm86 TSS at fc012800 > (XEN) HVM1: BIOS map: > *_(XEN) HVM1: c0000-cf7ff: VGA BIOS_* > (XEN) HVM1: cf800-dbfff: Etherboot ROM > (XEN) HVM1: eb000-eb175: SMBIOS tables > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) > (XEN) HVM1: IDE time out > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > (XEN) HVM1: IDE time out > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: > (XEN) HVM1: Press F12 for boot menu. > (XEN) HVM1: > (XEN) HVM1: Booting from Hard Disk... > (XEN) HVM1: Booting from 0000:7c00 > (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 > (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 > (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 > (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 > (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 > (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 > (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 > (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 > > Thank you. > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website:http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN:teoenming@hotmail.com <mailto:teoenming@hotmail.com> > Alma Maters: Singapore Polytechnic, National University of Singapore > > > > On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: > > OK I have just reached home after work. > > >Teo, > > >Please can you post your > > >1) lspci output from Dom0 for your VGA card > > 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS > (rev a1) (prog-if 00 [VGA controller]) > > 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) > > >2) qemu log for DomU > > Will post later when I reboot with Serial Console > > >3) xm dmesg output > > Will post later when I reboot with Serial Console > > >4) Modifications you made to vBAR-pBAR patch > > I did not make any modifications to the vbar-pbar patch. I used the > 1:1 map patch as provided by Weidong Intel verbatim. > > >Thanks Tim > > Thank you. >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Mr. Teo En Ming (Zhang Enming)
2009-Sep-08 00:08 UTC
Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
Hi Weidong, Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote:> All other things being equal, then it must be the differences between > our graphics card. > > What motherboard are you using? > > Can you do a video presentation as well? > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website:http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN:teoenming@hotmail.com > Alma Maters: Singapore Polytechnic, National University of Singapore > > > On 09/07/2009 11:45 PM, Tim Moore wrote: >> >> Version 1 still, >> >> Kernel 2.6.18 or pvops rc6 worked for me - >> >> *From:* Mr. Teo En Ming (Zhang Enming) >> [mailto:enming.teo@asiasoftsea.net] >> *Sent:* 07 September 2009 16:03 >> *To:* enming.teo@asiasoftsea.net >> *Cc:* xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, >> Weidong; Tim Moore >> *Subject:* Re: [Xen-devel] Video Presentation on PCI Express x16 VGA >> PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine >> >> >> Hi Timothy, >> >> Are you using the Intel gfx passthrough Version 1 or Version 2 patches? >> >> I am still using Version 1 patches. >> >> -- >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >> Technical Support Engineer >> Information Technology Department >> Asiasoft Online Pte Ltd >> Tampines Central 1 #04-01 Tampines Plaza >> Singapore 529541 >> Republic of Singapore >> Company Website:http://www.asiasoft.sg/ >> Mobile: +65-9648-9798 >> MSN:teoenming@hotmail.com <mailto:teoenming@hotmail.com> >> Alma Maters: Singapore Polytechnic, National University of Singapore >> >> >> >> On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: >> >> Hi, >> >> Here is my "xm dmesg" output. Important lines have been bolded and >> underlined. >> >> *_(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 >> (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0_* >> (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c >> (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 >> (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 >> (XEN) HVM1: HVM Loader >> (XEN) HVM1: Detected Xen v3.5-unstable >> (XEN) HVM1: CPU speed is 2800 MHz >> (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 >> (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 >> (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 >> (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 >> (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 >> (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 >> (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 >> (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 >> (XEN) HVM1: pci dev 01:2 INTD->IRQ5 >> (XEN) HVM1: pci dev 01:3 INTA->IRQ10 >> (XEN) HVM1: pci dev 02:0 INTA->IRQ11 >> (XEN) HVM1: pci dev 03:0 INTA->IRQ5 >> *_(XEN) HVM1: Make vBAR = pBAR of assigned gfx_* >> (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 >> (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 >> (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 >> (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 >> (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 >> (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 >> (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 >> (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 >> (XEN) HVM1: Multiprocessor initialisation: >> (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs >> [3/8] ... done. >> (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs >> [3/8] ... done. >> (XEN) HVM1: Testing HVM environment: >> (XEN) HVM1: - REP INSB across page boundaries ... passed >> (XEN) HVM1: - GS base MSRs and SWAPGS ... passed >> (XEN) HVM1: Passed 2 of 2 tests >> (XEN) HVM1: Writing SMBIOS tables ... >> (XEN) HVM1: Loading ROMBIOS ... >> (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: >> (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done >> (XEN) HVM1: Creating MP tables ... >> *_(XEN) HVM1: Loading VGABIOS of passthroughed gfx ..._* >> (XEN) HVM1: Loading PCI Option ROM ... >> (XEN) HVM1: - Manufacturer: http://etherboot.org >> (XEN) HVM1: - Product name: gPXE >> (XEN) HVM1: Loading ACPI ... >> (XEN) HVM1: - Lo data: 000ea020-000ea04f >> (XEN) HVM1: - Hi data: fc003000-fc01261f >> (XEN) HVM1: vm86 TSS at fc012800 >> (XEN) HVM1: BIOS map: >> *_(XEN) HVM1: c0000-cf7ff: VGA BIOS_* >> (XEN) HVM1: cf800-dbfff: Etherboot ROM >> (XEN) HVM1: eb000-eb175: SMBIOS tables >> (XEN) HVM1: f0000-fffff: Main BIOS >> (XEN) HVM1: Invoking ROMBIOS ... >> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >> (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! >> (XEN) HVM1: Bochs BIOS - build: 06/23/99 >> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >> (XEN) HVM1: Options: apmbios pcibios eltorito PMM >> (XEN) HVM1: >> (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 >> (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) >> (XEN) HVM1: IDE time out >> (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >> (XEN) HVM1: IDE time out >> (XEN) HVM1: >> (XEN) HVM1: >> (XEN) HVM1: >> (XEN) HVM1: Press F12 for boot menu. >> (XEN) HVM1: >> (XEN) HVM1: Booting from Hard Disk... >> (XEN) HVM1: Booting from 0000:7c00 >> (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 >> (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! >> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >> (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff >> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >> (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 >> (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 >> (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 >> (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 >> (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 >> (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 >> nr_mfns=10000 >> (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 >> (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 >> (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 >> (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 >> >> Thank you. >> >> -- >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >> Technical Support Engineer >> Information Technology Department >> Asiasoft Online Pte Ltd >> Tampines Central 1 #04-01 Tampines Plaza >> Singapore 529541 >> Republic of Singapore >> Company Website:http://www.asiasoft.sg/ >> Mobile: +65-9648-9798 >> MSN:teoenming@hotmail.com <mailto:teoenming@hotmail.com> >> Alma Maters: Singapore Polytechnic, National University of Singapore >> >> >> >> On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: >> >> OK I have just reached home after work. >> >> >Teo, >> >> >Please can you post your >> >> >1) lspci output from Dom0 for your VGA card >> >> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS >> (rev a1) (prog-if 00 [VGA controller]) >> >> 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >> >> >2) qemu log for DomU >> >> Will post later when I reboot with Serial Console >> >> >3) xm dmesg output >> >> Will post later when I reboot with Serial Console >> >> >4) Modifications you made to vBAR-pBAR patch >> >> I did not make any modifications to the vbar-pbar patch. I used the >> 1:1 map patch as provided by Weidong Intel verbatim. >> >> >Thanks Tim >> >> Thank you. >> > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Han, Weidong
2009-Sep-08 00:46 UTC
RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
I tried nVidia GeForce 8400 GS on Q35. I didn't see that message. BTW, I cannot access your video URL. Regards, Weidong ________________________________ From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 2009年9月8日 8:08 To: enming.teo@asiasoftsea.net Cc: timothy.moore@expidas.net; xen-devel@lists.xensource.com; Han, Weidong; bengheng@eecs.umich.edu Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com<mailto:teoenming@hotmail.com> Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: All other things being equal, then it must be the differences between our graphics card. What motherboard are you using? Can you do a video presentation as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com<mailto:teoenming@hotmail.com> Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 11:45 PM, Tim Moore wrote: Version 1 still, Kernel 2.6.18 or pvops rc6 worked for me - From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 16:03 To: enming.teo@asiasoftsea.net<mailto:enming.teo@asiasoftsea.net> Cc: xen-devel@lists.xensource.com<mailto:xen-devel@lists.xensource.com>; bengheng@eecs.umich.edu<mailto:bengheng@eecs.umich.edu>; Han, Weidong; Tim Moore Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Timothy, Are you using the Intel gfx passthrough Version 1 or Version 2 patches? I am still using Version 1 patches. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com<mailto:teoenming@hotmail.com> Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: Hi, Here is my "xm dmesg" output. Important lines have been bolded and underlined. (XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.5-unstable (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: Make vBAR = pBAR of assigned gfx (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: - GS base MSRs and SWAPGS ... passed (XEN) HVM1: Passed 2 of 2 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc003000-fc01261f (XEN) HVM1: vm86 TSS at fc012800 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-cf7ff: VGA BIOS (XEN) HVM1: cf800-dbfff: Etherboot ROM (XEN) HVM1: eb000-eb175: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com<mailto:teoenming@hotmail.com> Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: OK I have just reached home after work.>Teo,>Please can you post your>1) lspci output from Dom0 for your VGA card01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller])>2) qemu log for DomUWill post later when I reboot with Serial Console>3) xm dmesg outputWill post later when I reboot with Serial Console>4) Modifications you made to vBAR-pBAR patchI did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim.>Thanks TimThank you. ________________________________ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com<mailto:Xen-devel@lists.xensource.com> http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Mr. Teo En Ming (Zhang Enming)
2009-Sep-08 00:51 UTC
Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine
Hi Weidong, Here are my Youtube video presentation links: http://www.youtube.com/watch?v=HNEiSInrav0 http://www.youtube.com/watch?v=_hOT_9LIG5w -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 08:46 AM, Han, Weidong wrote:> I tried nVidia GeForce 8400 GS on Q35. I didn''t see that message. BTW, > I cannot access your video URL. > Regards, > Weidong > > ------------------------------------------------------------------------ > *From:* Mr. Teo En Ming (Zhang Enming) > [mailto:enming.teo@asiasoftsea.net] > *Sent:* 2009年9月8日 8:08 > *To:* enming.teo@asiasoftsea.net > *Cc:* timothy.moore@expidas.net; xen-devel@lists.xensource.com; Han, > Weidong; bengheng@eecs.umich.edu > *Subject:* Re: [Xen-devel] Video Presentation on PCI Express x16 VGA > PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine > > Hi Weidong, > > Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB > as well? > > -- > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) > Technical Support Engineer > Information Technology Department > Asiasoft Online Pte Ltd > Tampines Central 1 #04-01 Tampines Plaza > Singapore 529541 > Republic of Singapore > Company Website: http://www.asiasoft.sg/ > Mobile: +65-9648-9798 > MSN: teoenming@hotmail.com > Alma Maters: Singapore Polytechnic, National University of Singapore > > > On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: >> All other things being equal, then it must be the differences between >> our graphics card. >> >> What motherboard are you using? >> >> Can you do a video presentation as well? >> >> -- >> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >> Technical Support Engineer >> Information Technology Department >> Asiasoft Online Pte Ltd >> Tampines Central 1 #04-01 Tampines Plaza >> Singapore 529541 >> Republic of Singapore >> Company Website: http://www.asiasoft.sg/ >> Mobile: +65-9648-9798 >> MSN: teoenming@hotmail.com >> Alma Maters: Singapore Polytechnic, National University of Singapore >> >> >> On 09/07/2009 11:45 PM, Tim Moore wrote: >>> >>> Version 1 still, >>> >>> Kernel 2.6.18 or pvops rc6 worked for me - >>> >>> *From:* Mr. Teo En Ming (Zhang Enming) >>> [mailto:enming.teo@asiasoftsea.net] >>> *Sent:* 07 September 2009 16:03 >>> *To:* enming.teo@asiasoftsea.net >>> *Cc:* xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, >>> Weidong; Tim Moore >>> *Subject:* Re: [Xen-devel] Video Presentation on PCI Express x16 VGA >>> PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine >>> >>> >>> Hi Timothy, >>> >>> Are you using the Intel gfx passthrough Version 1 or Version 2 patches? >>> >>> I am still using Version 1 patches. >>> >>> -- >>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >>> Technical Support Engineer >>> Information Technology Department >>> Asiasoft Online Pte Ltd >>> Tampines Central 1 #04-01 Tampines Plaza >>> Singapore 529541 >>> Republic of Singapore >>> Company Website: http://www.asiasoft.sg/ >>> Mobile: +65-9648-9798 >>> MSN: teoenming@hotmail.com <mailto:teoenming@hotmail.com> >>> Alma Maters: Singapore Polytechnic, National University of Singapore >>> >>> >>> >>> On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: >>> >>> Hi, >>> >>> Here is my "xm dmesg" output. Important lines have been bolded and >>> underlined. >>> >>> *_(XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 >>> (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0_* >>> (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c >>> (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 >>> (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 >>> (XEN) HVM1: HVM Loader >>> (XEN) HVM1: Detected Xen v3.5-unstable >>> (XEN) HVM1: CPU speed is 2800 MHz >>> (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 >>> (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 >>> (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 >>> (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 >>> (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 >>> (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 >>> (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 >>> (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 >>> (XEN) HVM1: pci dev 01:2 INTD->IRQ5 >>> (XEN) HVM1: pci dev 01:3 INTA->IRQ10 >>> (XEN) HVM1: pci dev 02:0 INTA->IRQ11 >>> (XEN) HVM1: pci dev 03:0 INTA->IRQ5 >>> *_(XEN) HVM1: Make vBAR = pBAR of assigned gfx_* >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 >>> (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 >>> (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 >>> (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 >>> (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 >>> (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 >>> (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 >>> (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 >>> (XEN) HVM1: Multiprocessor initialisation: >>> (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs >>> [3/8] ... done. >>> (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs >>> [3/8] ... done. >>> (XEN) HVM1: Testing HVM environment: >>> (XEN) HVM1: - REP INSB across page boundaries ... passed >>> (XEN) HVM1: - GS base MSRs and SWAPGS ... passed >>> (XEN) HVM1: Passed 2 of 2 tests >>> (XEN) HVM1: Writing SMBIOS tables ... >>> (XEN) HVM1: Loading ROMBIOS ... >>> (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: >>> (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done >>> (XEN) HVM1: Creating MP tables ... >>> *_(XEN) HVM1: Loading VGABIOS of passthroughed gfx ..._* >>> (XEN) HVM1: Loading PCI Option ROM ... >>> (XEN) HVM1: - Manufacturer: http://etherboot.org >>> (XEN) HVM1: - Product name: gPXE >>> (XEN) HVM1: Loading ACPI ... >>> (XEN) HVM1: - Lo data: 000ea020-000ea04f >>> (XEN) HVM1: - Hi data: fc003000-fc01261f >>> (XEN) HVM1: vm86 TSS at fc012800 >>> (XEN) HVM1: BIOS map: >>> *_(XEN) HVM1: c0000-cf7ff: VGA BIOS_* >>> (XEN) HVM1: cf800-dbfff: Etherboot ROM >>> (XEN) HVM1: eb000-eb175: SMBIOS tables >>> (XEN) HVM1: f0000-fffff: Main BIOS >>> (XEN) HVM1: Invoking ROMBIOS ... >>> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >>> (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! >>> (XEN) HVM1: Bochs BIOS - build: 06/23/99 >>> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >>> (XEN) HVM1: Options: apmbios pcibios eltorito PMM >>> (XEN) HVM1: >>> (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 >>> (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) >>> (XEN) HVM1: IDE time out >>> (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >>> (XEN) HVM1: IDE time out >>> (XEN) HVM1: >>> (XEN) HVM1: >>> (XEN) HVM1: >>> (XEN) HVM1: Press F12 for boot menu. >>> (XEN) HVM1: >>> (XEN) HVM1: Booting from Hard Disk... >>> (XEN) HVM1: Booting from 0000:7c00 >>> (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 >>> (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! >>> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >>> (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff >>> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >>> (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 >>> (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 >>> (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 >>> (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 >>> (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 >>> (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 >>> nr_mfns=1000 >>> (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 >>> nr_mfns=10000 >>> (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 >>> nr_mfns=2000 >>> (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 >>> (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 >>> (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 >>> >>> Thank you. >>> >>> -- >>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) >>> Technical Support Engineer >>> Information Technology Department >>> Asiasoft Online Pte Ltd >>> Tampines Central 1 #04-01 Tampines Plaza >>> Singapore 529541 >>> Republic of Singapore >>> Company Website: http://www.asiasoft.sg/ >>> Mobile: +65-9648-9798 >>> MSN: teoenming@hotmail.com <mailto:teoenming@hotmail.com> >>> Alma Maters: Singapore Polytechnic, National University of Singapore >>> >>> >>> >>> On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: >>> >>> OK I have just reached home after work. >>> >>> >Teo, >>> >>> >Please can you post your >>> >>> >1) lspci output from Dom0 for your VGA card >>> >>> 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 >>> GS (rev a1) (prog-if 00 [VGA controller]) >>> >>> 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller]) >>> >>> >2) qemu log for DomU >>> >>> Will post later when I reboot with Serial Console >>> >>> >3) xm dmesg output >>> >>> Will post later when I reboot with Serial Console >>> >>> >4) Modifications you made to vBAR-pBAR patch >>> >>> I did not make any modifications to the vbar-pbar patch. I used the >>> 1:1 map patch as provided by Weidong Intel verbatim. >>> >>> >Thanks Tim >>> >>> Thank you. >>> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Xen-devel mailing list >> Xen-devel@lists.xensource.com >> http://lists.xensource.com/xen-devel >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Teo En Ming (Zhang Enming)
2009-Sep-08 02:02 UTC
RE: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThroughto Xen-based Windows XP Home Edition HVM Virtual Machine
These presentation videos were captured (through firewire) and rendered by me using the open source video editor kdenlive. http://www.kdenlive.org/ Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com _____ From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists. xensource.com] On Behalf Of Mr. Teo En Ming (Zhang Enming) Sent: Tuesday, September 08, 2009 8:52 AM To: weidong.han@intel.com Cc: ''xen-devel@lists.xensource.com''; ''timothy.moore@expidas.net''; ''bengheng@eecs.umich.edu'' Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThroughto Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Here are my Youtube video presentation links: http://www.youtube.com/watch?v=HNEiSInrav0 http://www.youtube.com/watch?v=_hOT_9LIG5w -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 08:46 AM, Han, Weidong wrote: I tried nVidia GeForce 8400 GS on Q35. I didn''t see that message. BTW, I cannot access your video URL. Regards, Weidong _____ From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 2009年9月8日 8:08 To: enming.teo@asiasoftsea.net Cc: timothy.moore@expidas.net; xen-devel@lists.xensource.com; Han, Weidong; bengheng@eecs.umich.edu Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: All other things being equal, then it must be the differences between our graphics card. What motherboard are you using? Can you do a video presentation as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 11:45 PM, Tim Moore wrote: Version 1 still, Kernel 2.6.18 or pvops rc6 worked for me - From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 16:03 To: enming.teo@asiasoftsea.net Cc: xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, Weidong; Tim Moore Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Timothy, Are you using the Intel gfx passthrough Version 1 or Version 2 patches? I am still using Version 1 patches. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: Hi, Here is my "xm dmesg" output. Important lines have been bolded and underlined. (XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.5-unstable (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: Make vBAR = pBAR of assigned gfx (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: - GS base MSRs and SWAPGS ... passed (XEN) HVM1: Passed 2 of 2 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc003000-fc01261f (XEN) HVM1: vm86 TSS at fc012800 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-cf7ff: VGA BIOS (XEN) HVM1: cf800-dbfff: Etherboot ROM (XEN) HVM1: eb000-eb175: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: OK I have just reached home after work.>Teo,>Please can you post your>1) lspci output from Dom0 for your VGA card01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller])>2) qemu log for DomUWill post later when I reboot with Serial Console>3) xm dmesg outputWill post later when I reboot with Serial Console>4) Modifications you made to vBAR-pBAR patchI did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim.>Thanks TimThank you. _____ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel _____ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Teo En Ming (Zhang Enming)
2009-Sep-08 10:57 UTC
RE: [Xen-devel] Video Presentation on PCI Express x16 VGA Pass Through to Xen-based Windows XP Home Edition HVM Virtual Machine
Dear Weidong, Have you managed to watch the videos? Regards, Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Mobile: +65-9648-9798 MSN: teoenming@hotmail.com _____ From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists. xensource.com] On Behalf Of Mr. Teo En Ming (Zhang Enming) Sent: Tuesday, September 08, 2009 8:52 AM To: weidong.han@intel.com Cc: ''xen-devel@lists.xensource.com''; ''timothy.moore@expidas.net''; ''bengheng@eecs.umich.edu'' Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThroughto Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Here are my Youtube video presentation links: http://www.youtube.com/watch?v=HNEiSInrav0 http://www.youtube.com/watch?v=_hOT_9LIG5w -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 08:46 AM, Han, Weidong wrote: I tried nVidia GeForce 8400 GS on Q35. I didn''t see that message. BTW, I cannot access your video URL. Regards, Weidong _____ From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 2009年9月8日 8:08 To: enming.teo@asiasoftsea.net Cc: timothy.moore@expidas.net; xen-devel@lists.xensource.com; Han, Weidong; bengheng@eecs.umich.edu Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Weidong, Are you also using nVidia GeForce 8400 GS PCI-E x16 with Intel DQ45CB as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/08/2009 07:54 AM, Mr. Teo En Ming (Zhang Enming) wrote: All other things being equal, then it must be the differences between our graphics card. What motherboard are you using? Can you do a video presentation as well? -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 11:45 PM, Tim Moore wrote: Version 1 still, Kernel 2.6.18 or pvops rc6 worked for me - From: Mr. Teo En Ming (Zhang Enming) [mailto:enming.teo@asiasoftsea.net] Sent: 07 September 2009 16:03 To: enming.teo@asiasoftsea.net Cc: xen-devel@lists.xensource.com; bengheng@eecs.umich.edu; Han, Weidong; Tim Moore Subject: Re: [Xen-devel] Video Presentation on PCI Express x16 VGA PassThrough to Xen-based Windows XP Home Edition HVM Virtual Machine Hi Timothy, Are you using the Intel gfx passthrough Version 1 or Version 2 patches? I am still using Version 1 patches. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:56 PM, Mr. Teo En Ming (Zhang Enming) wrote: Hi, Here is my "xm dmesg" output. Important lines have been bolded and underlined. (XEN) [VT-D]iommu.c:1292:d0 domain_context_unmap:PCIe: bdf = 1:0.0 (XEN) [VT-D]iommu.c:1178:d0 domain_context_mapping:PCIe: bdf = 1:0.0 (XEN) domctl.c:887:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:887:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:836:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) [VT-D]io.c:284:d0 VT-d irq bind: m_irq = 37 device = 4 intx = 0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.5-unstable (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: Make vBAR = pBAR of assigned gfx (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 (XEN) HVM1: pci dev 02:0 bar 14 size 01000000: e0000008 (XEN) HVM1: pci dev 02:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 00000100: e1000000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: - GS base MSRs and SWAPGS ... passed (XEN) HVM1: Passed 2 of 2 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 11900 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc002e7c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc003000-fc01261f (XEN) HVM1: vm86 TSS at fc012800 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-cf7ff: VGA BIOS (XEN) HVM1: cf800-dbfff: Etherboot ROM (XEN) HVM1: eb000-eb175: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f14, BX=078f not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0066 not yet supported! (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:714:d1 MCE: rdmsr MC0_CTL 0xffffffffffffffff (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) mce.c:694:d1 MCE: rdmsr MCG_CAP 0x806 (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:846:d0 memory_map:remove: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:911:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=80 (XEN) domctl.c:836:d0 memory_map:add: gfn=d2000 mfn=d2000 nr_mfns=1000 (XEN) domctl.c:836:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000 (XEN) domctl.c:836:d0 memory_map:add: gfn=d0000 mfn=d0000 nr_mfns=2000 (XEN) domctl.c:887:d0 ioport_map:add f_gport=d000 f_mport=d000 np=80 Thank you. -- Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering) Technical Support Engineer Information Technology Department Asiasoft Online Pte Ltd Tampines Central 1 #04-01 Tampines Plaza Singapore 529541 Republic of Singapore Company Website: http://www.asiasoft.sg/ Mobile: +65-9648-9798 MSN: teoenming@hotmail.com Alma Maters: Singapore Polytechnic, National University of Singapore On 09/07/2009 10:00 PM, Mr. Teo En Ming (Zhang Enming) wrote: OK I have just reached home after work.>Teo,>Please can you post your>1) lspci output from Dom0 for your VGA card01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) (prog-if 00 [VGA controller]) 01:00.0 0300: 10de:06e4 (rev a1) (prog-if 00 [VGA controller])>2) qemu log for DomUWill post later when I reboot with Serial Console>3) xm dmesg outputWill post later when I reboot with Serial Console>4) Modifications you made to vBAR-pBAR patchI did not make any modifications to the vbar-pbar patch. I used the 1:1 map patch as provided by Weidong Intel verbatim.>Thanks TimThank you. _____ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel _____ _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.409 / Virus Database: 270.13.81/2350 - Release Date: 09/06/09 17:51:00 _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel