Xen devel - Jul 2006 - qla2xxx driver failed in dom0 - invalid opcode: 0000 [1] SMP

I wanted to post this in case there is a real bug here.

The system this is on is running Debian Etch with the Xen packages from
Debian Unstable (currently 3.0.2+hg9697-1).  I am running all packaged
software so this is probably slightly out of date.

This is on an HP DL320 G4 with a Pentium D 930 processor.  I tried unloading
and reloading the qla2xxx module, but rmmod reported it in use, however it
did not seem to be used by any other module.

dmesg output below:

QLogic Fibre Channel HBA Driver
qla2xxx 0000:06:01.0: Found an ISP2312, irq 16, iobase 0xffffc2000001e000
qla2xxx 0000:06:01.0: Configuring PCI space...
qla2xxx 0000:06:01.0: Configure NVRAM parameters...
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at arch/x86_64/mm/fault-xen.c:292
invalid opcode: 0000 [1] SMP
CPU 1
Modules linked in: qla2xxx libata firmware_class tg3 scsi_transport_fc
psmouse serio_raw serial_core ext3 jbd mbcache cciss scsi_mod
Pid: 2163, comm: modprobe Not tainted 2.6.16-2-xen-em64t-p4 #1
RIP: e030:[<ffffffff801166f7>]
<ffffffff801166f7>{do_page_fault+1656}
RSP: e02b:ffff88000ec1daf8  EFLAGS: 00010287
RAX: ffff800000000000 RBX: ffff880000c6a000 RCX: 00003ffffffff000
RDX: 00000000000fdff0 RSI: ffff880000c690f0 RDI: 0000000000010800
RBP: ffff880000000000 R08: 0000000000010800 R09: 0000000000000000
R10: 0000000003c69067 R11: ffff880001000000 R12: ffffc2000001e00e
R13: ffff88000ec1dbe8 R14: ffff88000e2cf140 R15: 0000000000000002
FS:  00002ad5ad5566d0(0000) GS:ffffffff80407080(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000
Process modprobe (pid: 2163, threadinfo ffff88000ec1c000, task
ffff88000e2cf140)
Stack: ffffffffffffd028 ffff880000c6b000 0000000000002fd8 0000000000030001
       0000000000000246 ffffffff801e7166 000000000000001e 0000000000000034
       0000000000030000 ffffffff8010722a
Call Trace: <ffffffff801e7166>{vgacon_cursor+0}
<ffffffff8010722a>{hypercall_page+554}
       <ffffffff8010722a>{hypercall_page+554}
<ffffffff8023729f>{force_evtchn_callback+10}
       <ffffffff8010b403>{error_exit+0}
<ffffffff801e03d4>{__pci_find_next_cap+100}
       <ffffffff801e03d4>{__pci_find_next_cap+100}
<ffffffff880d7a5f>{:qla2xxx:qla2x00_get_nvram_word+72}
       <ffffffff880d7a97>{:qla2xxx:qla2x00_get_nvram_word+128}
       <ffffffff801e03d4>{__pci_find_next_cap+100}
<ffffffff880d7ae5>{:qla2xxx:qla2x00_read_nvram_data+41}
       <ffffffff880ca5e3>{:qla2xxx:qla2x00_nvram_config+137}
       <ffffffff880cd48f>{:qla2xxx:qla2x00_initialize_adapter+243}
       <ffffffff880c83cd>{:qla2xxx:qla2x00_probe_one+3594}
       <ffffffff80121dc0>{__wake_up+54}
<ffffffff801e2220>{pci_device_probe+74}
       <ffffffff802334a1>{driver_probe_device+82}
<ffffffff80233550>{__driver_attach+0}
       <ffffffff802335a6>{__driver_attach+86}
<ffffffff80232ae4>{bus_for_each_dev+67}
       <ffffffff80232ddd>{bus_add_driver+110}
<ffffffff801e7166>{vgacon_cursor+0}
       <ffffffff801e1e2a>{__pci_register_driver+128}
<ffffffff88078e5b>{:scsi_transport_fc:fc_attach_transport+216}
       <ffffffff880e908f>{:qla2xxx:qla2x00_module_init+143}
       <ffffffff80142b2e>{sys_init_module+240}
<ffffffff8010acea>{system_call+134}
       <ffffffff8010ac64>{system_call+0}

Code: 0f 0b 68 aa 8f 2e 80 c2 24 01 e9 59 04 00 00 41 f6 c7 08 74
RIP <ffffffff801166f7>{do_page_fault+1656} RSP <ffff88000ec1daf8>

A soft reboot from the dom0 produced a successful load the second time:

QLogic Fibre Channel HBA Driver
qla2xxx 0000:06:01.0: Found an ISP2312, irq 16, iobase 0xffffc2000001e000
qla2xxx 0000:06:01.0: Configuring PCI space...
qla2xxx 0000:06:01.0: Configure NVRAM parameters...
qla2xxx 0000:06:01.0: Verifying loaded RISC code...
qla2xxx 0000:06:01.0: Waiting for LIP to complete...
qla2xxx 0000:06:01.0: LIP reset occured (f700).
qla2xxx 0000:06:01.0: LOOP UP detected (2 Gbps).
qla2xxx 0000:06:01.0: Topology - (F_Port), Host Loop address 0xffff
scsi0 : qla2xxx
qla2xxx 0000:06:01.0:
 QLogic Fibre Channel HBA Driver: 8.01.04-k
  QLogic QLA2340 -
  ISP2312: PCI-X (133 MHz) @ 0000:06:01.0 hdma-, host#=0, fw=3.03.20 IPX
scsi: unknown device type 12
  Vendor: COMPAQ    Model: MSA1000           Rev: 5.02
  Type:   RAID                               ANSI SCSI revision: 04
  Vendor: COMPAQ    Model: MSA1000 VOLUME    Rev: 5.02
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: COMPAQ    Model: MSA1000 VOLUME    Rev: 5.02
  Type:   Direct-Access                      ANSI SCSI revision: 04

--
Michael Brancato, CISSP, CCNA


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel