Good to hear that progress is being made.
I suspect that linux 2.4 dom0 (as opposed to domU) functionality will be
dropped at some point in the not too distant future. Moving the
IOAPIC/PCI functionality from Xen into dom0 will certainly break it, and
its not clear who will care enough to fix it. Maybe someone will.
Ian
> -----Original Message-----
> From: xen-devel-admin@lists.sourceforge.net
> [mailto:xen-devel-admin@lists.sourceforge.net] On Behalf Of
> Harry Butterworth
> Sent: 18 March 2005 19:07
> To: Mark.Williamson@cl.cam.ac.uk
> Cc: xen-devel@lists.sourceforge.net
> Subject: [Xen-devel] USB virt 2.6 port status
>
> Progress this week:
>
> The 2.6 front end loads, discovers the 2.4 back-end, installs
> a USB hcd
> device, Linux turns on power to the virtual port, resets it and
> discovers the attached device.
>
> Linux sends the first URB. The behaviour of the Linux USB hub driver
> has changed since 2.4. Where previously it would send a set address
> request first it now starts with a get descriptor request.
>
> This get descriptor request currently fails against my USB disgo key,
> the hub driver tries to reset the port which isn''t supported
> by the 2.4
> back end and no further progress is made.
>
> Some debugging showed that the existing Xen usbif
> inter-domain protocol
> was passing the URB transfer-flags as defined in the usb.h header file
> and the definition of the bits in these flags has changed between 2.4
> and 2.6 such that the values passed by the 2.6 kernel are
> incorrect when
> interpreted by the 2.4 kernel.
>
> I need to fix the xen usbif protocol so the parameters passed are
> expressed independent of the linux kernel headers.
>
> I put in a quick hack for this and re-ran the test but the initial urb
> still failed.
>
> I''m not sure whether there are still 2.4/2.6
> incompatibilities to fix in
> the inter-domain protocol or if the disgo key simply can''t
> cope with the
> get descriptor request in which case explicitly handling the get
> descritor request in the back-end or implementing resets in
> the back-end
> to allow the front-end to pursue its retry strategy might be the next
> step.
>
> More debugging is required.
>
> I''m on vacation for a week now and will resume working on this
when I
> return.
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from
> real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xen-devel
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xen-devel