wine users - Apr 2012 - HID device (USB protection dongle) not recognized

Hi everyone,
I'm trying to run a software that relies on an USB protection dongle.
Windows sees the dongle as a HID device, and my Debian detects it correctly.

Here's the dump from lsusb for that device:


Code:
Bus 002 Device 002: ID 0e50:0002
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0e50
  idProduct          0x0002
  bcdDevice            1.01
  iManufacturer           1 TDi GmbH - Germany
  iProduct                2 USB-Chip
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower                8mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
         bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      51
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval             255




I've built Wine 1.4 with USB patch from http://wiki.winehq.org/USB but the
device is still undetected.

The device require no driver on Windows and it's controlled by a DLL
(matrix32.dll). This DLL depends on KERNEL32.DLL, USER32.DLL, WINSPOOL.DRV,
ADVAPI32.DLL.

I see that these functions are imported from WINSPOOL.DRV: ClosePrinter,
SetPrinterA, OpenPrinterA, EnumPrintersA.

Maybe the device is not detected because support for these functions is  still
not complete? Or there could be another reason?
Some test I can do?

Thanks in advance.

I tried to track down the problem.

Following the procedure on http://wiki.winehq.org/USB, I copied the driver
hidusb.sys to .wine/windows/system32/drivers.

But then I realized that this driver needs both USBD.SYS and HIDCLASS.SYS...
Mr. Dmitry says that
> Drivers which depend on modules other than ntoskrnl.exe, hal.dll, usbd.sys
will not work

So I guess there is no way to get this device working.

Some other ideas?

ghigorenzulli wrote:
> So I guess there is no way to get this device working.
Correct.