Hi all,
I have been testing network throughput and latency and I was wondering
if my measurements are as expected.
For the test, I used Fedora 17 for both host and guest, using kernel
3.5.2-3.fc17.86_64.
Pinging an external server on the LAN from the host, using a gigabit
interface, the results are:
# ping -c 10 172.16.1.1
PING 172.16.1.1 (172.16.1.1) 56(84) bytes of data.
64 bytes from 172.16.1.1: icmp_req=1 ttl=64 time=0.109 ms
64 bytes from 172.16.1.1: icmp_req=2 ttl=64 time=0.131 ms
64 bytes from 172.16.1.1: icmp_req=3 ttl=64 time=0.145 ms
64 bytes from 172.16.1.1: icmp_req=4 ttl=64 time=0.116 ms
64 bytes from 172.16.1.1: icmp_req=5 ttl=64 time=0.110 ms
64 bytes from 172.16.1.1: icmp_req=6 ttl=64 time=0.114 ms
64 bytes from 172.16.1.1: icmp_req=7 ttl=64 time=0.112 ms
64 bytes from 172.16.1.1: icmp_req=8 ttl=64 time=0.117 ms
64 bytes from 172.16.1.1: icmp_req=9 ttl=64 time=0.119 ms
64 bytes from 172.16.1.1: icmp_req=10 ttl=64 time=0.128 ms
--- 172.16.1.1 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 8999ms
rtt min/avg/max/mdev = 0.109/0.120/0.145/0.011 ms
Pinging the same external host on the LAN from the guest, the latency
seems to be much higher:
# ping -c 10 172.16.1.1
PING 172.16.1.1 (172.16.1.1) 56(84) bytes of data.
64 bytes from 172.16.1.1: icmp_req=1 ttl=64 time=0.206 ms
64 bytes from 172.16.1.1: icmp_req=2 ttl=64 time=0.352 ms
64 bytes from 172.16.1.1: icmp_req=3 ttl=64 time=0.518 ms
64 bytes from 172.16.1.1: icmp_req=4 ttl=64 time=0.351 ms
64 bytes from 172.16.1.1: icmp_req=5 ttl=64 time=0.543 ms
64 bytes from 172.16.1.1: icmp_req=6 ttl=64 time=0.387 ms
64 bytes from 172.16.1.1: icmp_req=7 ttl=64 time=0.348 ms
64 bytes from 172.16.1.1: icmp_req=8 ttl=64 time=0.364 ms
64 bytes from 172.16.1.1: icmp_req=9 ttl=64 time=0.345 ms
64 bytes from 172.16.1.1: icmp_req=10 ttl=64 time=0.334 ms
--- 172.16.1.1 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 8999ms
rtt min/avg/max/mdev = 0.206/0.374/0.543/0.093 ms
(The LAN, the host and guest are idle otherwise during the tests.)
The vhost_net and macvtap modules are loaded on the host, and qemu was
started (by libvirtd) with the -netdev vhost=on option.
Is this expected and normal, or do others see better latencies? Can I
try anything to make it better?
Thanks,
Balazs Pozsar
