similar to: xvm networking on 2005.11 (b94) with iwk

Actually, it is not a list.. but just something that''ll be very useful to me in my business. If crossbow/virtual interfaces can provide a flow that can capture bandwidth usage over a period of time (including 95 percentile), that''ll be great! Is this possible? -- This message posted from opensolaris.org

redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #

So, just to play with vnics with 106, I have... e1000g2 plumb''d with 192.168.85.10 vnic0 is created on top of e1000g2 with 192.168.85.22 I snoop on e1000g2 to see the traffic. I ping 192.168.85.22 and it works. I stop the snoop on e1000g2. I ping 192.168.85.22 and it doesn''t work. I start the snoop on e1000g2. I ping 192.168.85.22 and ping works. Is this a new feature with

Hi, I''m running snv_89 on an X4150 with a CentOS-5 guest. I cannot seem to get my second network interface to work properly. I followed the virt-install instructions, and even saw the FAQ entry about adding a second network instance in the XML config. I see my second device in the guest but it''s either connected to the wrong interface or not at all. I''d like to

Before I post to networking-discuss I wanted to ask if anyone had tried this on this: I''m trying to run a dhcp-server on a dom0 over a vnic so that the domU''s can get IP addresses. I created a vnic r1 over e1000g0 and gave it a static IP 172.0.94.111/24 so I can run the dhcp server over this vnic. root@lm2-dom0:~# dhtadm -P Name Type Value

1 simple question about network statistics for vnics: We noticed that the statistics for vnics (used by Virtualbox guests) are not there. When the nics are plumped in the host OS, we do see them showing up, but all all records are 0. Can someone tell me how to get the correct network info via snmp on the Vbox Host?? Thanks in advance. IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING:

Basically what I am trying to attempt here is to have multiple vm''s in a private network that is seperate from any of the physical networking devices. So far all I have really been able to do is connect the vm''s to an etherstub, but cannot get them to communicate with eachother. I have been using this (http://blogs.sun.com/droux/entry/private_virtual_networks_for_solaris) as a

Hi Folks, I have a snv_105 sxce host that I just can''t get to work as expected with crossbow + zones. My test host persephone, is a virtual machine running under VMware ESXi 3.5, with 2 virtual network cards (e1000), all on the same flat network/subnet. It started life just 2 days ago with a clean install of snv_95, and I LUed to 105 yesterday. To rule out any sharing issue, the first

I am sharing out ZFS ISCSI luns to my Mac. When copying large files, the network will hang in the middle of the transfer and the LUN will become unavailable until I plumb the NIC. This issue appears to only occur only when I am reading files (ie..syncing an ipod) and not writing (I''m not 100% sure though). When I snoop the interface I notice a bunch of ARP lookups. Any ideas? Thanks in

Hi All, I have bfu''ed to net-virt_xb-21_snv_81_021308. The dladm command on my machine does not have create-etherstub option. Please let me know what could be the issue. Thanks Khushal

I''m looking for a way to backup my entire system, the rpool zfs pool to an external HDD so that it can be recovered in full if the internal HDD fails. Previously with Solaris 10 using UFS I would use ufsdump and ufsrestore, which worked so well, I was very confident with it. Now ZFS doesn''t have an exact replacement of this so I need to find a best practice to replace it.

How come snoop doesn''t find the vnic0, by default: root at pine:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnic0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.9.59.56 netmask ffffffe0 broadcast 10.9.59.63 ether 2:8:20:7f:a9:16 lo0:

Hi all, I installed another OpenSolaris (snv_129) in VirtualBox 3.1.0 on Windows because snv_130 doesn''t boot anymore after installation of VirtualBox guest additions. Older builds before snv_129 were running fine too. I like some features of this OS, but now I end with something funny. I installed default snv_129, installed guest additions -> reboot, set

Hi, I''m running Nevada 75a configured as dom0. I added a domU HVM running Nevada 75a, on a Sun X4600 with 8 ADM Dual cores. I can get the domU installed and configured, however, I can not get any network connectivity. I followed the steps accoding to documents on Open Solaris. I also followed some of the threads of the list to verify the configuration, but I can not fix the

I''m running a ubuntu 9.04 64 bit dom0 with kernel 2.6.29.6 and xen 3.4.0. My eth0 is bridged to br0 and to my guest VMs. The dom0 is running a dhcp server on br0 which is able to provide leases to physical machines on eth0, and also to a windows xp domU which is bridged to br0. However my open solaris 2009.6 domU is unable to obtain a dhcp lease. On the opensolaris side I can see this:

Hello, I am desperate. Today I realized that my OS 108 doesn''t want to boot. I have no idea what I screwed up. I upgraded on 108 last week without any problems. Here is where I''m stuck: Reading ZFS config: done. Mounting ZFS filesystems: (1/17) cannot mount ''/export'': directory is not empty (17/17) $ svcs -x svc:/system/filesystem/local:default (local file

I have a system that I''m trying to bring up with a mirrored rpool. I''m using DarkStar''s ZFS Root Mirror blog post as a guide (http://darkstar-solaris.blogspot.com/2008/09/zfs-root-mirror.html). When I get to step 3 I execute: pfexec prtvtoc /dev/rdsk/c7d0s2 | fmthard -s - /dev/rdsk/c7d1s2 I get: fmthard: Cannot open device /dev/rdsk/c7d1s2 - Permission denied Any

Hi, I cannot boot Windows XP domU on SXCE104 dom0. It was running for weeks.. Is it a known bug? # virsh start wxpp01 & # virsh dumpxml wxpp01 <domain type=''xen'' id=''-1''> <name>wxpp01</name> <uuid>fb96e8c9-940d-7e0a-12ef-f167a7f1102c</uuid> <os> <type>hvm</type>

Hi ! In snv_127 I suddenly face a problem I never had before. Xvm can''t attach a vif to my primary physical nic any longer: $ pfexec xm start ulrac1 Error: Device 0 (vif) could not be connected. error: Failed to create vnic over yukonx1 with MAC address 00:16:36:3c:bf:70 This worked fine in all previous snv_12x releases I tested, including snv_126. I think there is a privilege

Hi All, I have a machine with three network cards, and the third card(named e1000g2) is in use now. I want to use e1000g2 as default NIC when I create Guest. How can I change the default NIC? I can override the default value of config/default-nic property of svc:/system/xvm/xend. But xend still use e1000g0 when creating Guest. BTW, I can explicitly set "bridge=e1000g2" when creating