Before I post to networking-discuss I wanted to ask if anyone had
tried this on this:
I''m trying to run a dhcp-server on a dom0 over a vnic so that the
domU''s can get IP addresses.
I created a vnic r1 over e1000g0 and gave it a static IP
172.0.94.111/24 so I can run the dhcp server over this vnic.
root@lm2-dom0:~# dhtadm -P
Name Type Value
=================================================172.0.94.0
Macro
:Subnet
=
255.255.255.0
:Router
=
172.0.94.111
:Broadcst
=172.0.94.255:NISdmain="celab.sfbay.sun.com":NISservs=129.146.17.35:
lm2-dom0
Macro
:Include
=
Locale:Timeserv
=
10.5.184.94
:LeaseTim=86400:LeaseNeg:DNSdmain="network.com":DNSserv=129.147.9.5:
Locale Macro :UTCoffst=-28800:
Partial output of pntadm
root@lm2-dom0:~# pntadm -P 172.0.94.0
Client ID Flags Client IP Server IP Lease
Expiration Macro Comment
00 00 172.0.94.189 172.0.94.111
Zero 172.0.94.0
00 00 172.0.94.188 172.0.94.111
Zero 172.0.94.0
Running in.dhcpd in debug mode I see:
root@lm2-dom0:~# /usr/lib/inet/in.dhcpd -dv -i r1,e1000g0
4b06de9c: Daemon Version: 3.5
4b06de9c: Maximum relay hops: 4
4b06de9c: Run mode is: DHCP Server Mode.
4b06de9c: Datastore resource: SUNWfiles
4b06de9c: Location: /var/dhcp
4b06de9c: DHCP offer TTL: 10
4b06de9c: ICMP validation timeout: 1000 milliseconds, Attempts: 1.
4b06de9c: Owner IP address: 127.0.0.1
4b06de9c: Maximum concurrent clients: 8192
4b06de9c: Maximum threads: 2048
4b06de9c: Read 3 entries from DHCP macro database on Fri Nov 20
10:23:24 2009
4b06de9c: Monitor (0003/e1000g0) started...
4b06de9c: Thread Id: 0003 - Monitoring Interface: e1000g0 *****
4b06de9c: MTU: 1500 Type: SOCKET
4b06de9c: Broadcast: 10.5.187.255
4b06de9c: Netmask: 255.255.252.0
4b06de9c: Address: 10.5.184.94
4b06de9c: Monitor (0004/r1) started...
4b06de9c: Thread Id: 0004 - Monitoring Interface: r1 *****
4b06de9c: MTU: 1500 Type: SOCKET
4b06de9c: Broadcast: 172.0.94.255
4b06de9c: Netmask: 255.255.255.0
4b06de9c: Address: 172.0.94.111
4b06dea3: Datagram received on network device: r1(limited broadcast)
4b06dea3: Datagram received on network device: e1000g0(limited
broadcast)
4b06dea3: e1000g0(limited broadcast): There is no 10.5.184.0 dhcp-
network table for DHCP client''s network.
When I bring up my domU I see the DHCPDISCOVER request in the domO but
the dhcpserver is not issuing IP address.
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 4 arrived at 10:15:12.70426
ETHER: Packet size = 342 bytes
ETHER: Destination = ff:ff:ff:ff:ff:ff, (broadcast)
ETHER: Source = 0:16:3e:0:0:e4,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: .... ..0. = not ECN capable transport
IP: .... ...0 = no ECN congestion experienced
IP: Total length = 328 bytes
IP: Identification = 44595
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 255 seconds/hops
IP: Protocol = 17 (UDP)
IP: Header checksum = cc71
IP: Source address = 0.0.0.0, OLD-BROADCAST
IP: Destination address = 255.255.255.255, BROADCAST
IP: No options
IP:
UDP: ----- UDP Header -----
UDP:
UDP: Source port = 68
UDP: Destination port = 67 (BOOTPS)
UDP: Length = 308
UDP: Checksum = 0000 (no checksum)
UDP:
DHCP: ----- Dynamic Host Configuration Protocol -----
DHCP:
DHCP: Hardware address type (htype) = 1 (Ethernet (10Mb))
DHCP: Hardware address length (hlen) = 6 octets
DHCP: Relay agent hops = 0
DHCP: Transaction ID = 0xd6054229
DHCP: Time since boot = 12 seconds
DHCP: Flags = 0x0000
DHCP: Client address (ciaddr) = 0.0.0.0
DHCP: Your client address (yiaddr) = 0.0.0.0
DHCP: Next server address (siaddr) = 0.0.0.0
DHCP: Relay agent address (giaddr) = 0.0.0.0
DHCP: Client hardware address (chaddr) = 00:16:3E:00:00:E4
DHCP:
DHCP: ----- (Options) field options -----
DHCP:
DHCP: Message type = DHCPDISCOVER
DHCP: Maximum DHCP Message Size = 1472 bytes
DHCP: IP Address Lease Time = -1 seconds
DHCP: Client Class Identifier = "SUNW.i86xpv"
DHCP: Requested Options:
DHCP: 1 (Subnet Mask)
DHCP: 3 (Router)
DHCP: 6 (DNS Servers)
DHCP: 12 (Client Hostname)
DHCP: 15 (DNS Domain Name)
DHCP: 28 (Broadcast Address)
DHCP: 43 (Vendor Specific Options)
Any suggestions or obvious thing that seems to be wrong it this setup?
thanks,
Sagun
Hi, [Just in case someone has insight]. Trying to debug the setup below I have found something interesting so wanted to know if anyone had any idea why this might be the case. So I have 2 system systemA and systemB. On system A the setup I have is: dom0+ dhcpserver(domU running a DHCP-server) + dhcpclientA (domU tryng to obtain an IP address via dhcp) On SystemB I have: dhcpclientB (domU tryng to obtain an IP address via dhcp). The dhcpclientB on system B managed to get an IP address from dhcpserver running on SystemA''s domU but the dhcpclientA (which is a domU on the same system) could not get an IP address. Is there anything that I have to add in the dom0 of SystemA to allow dhcpclientA to work? Thanks, Sagun On Nov 20, 2009, at 12:22 PM, sagun shakya wrote:> Before I post to networking-discuss I wanted to ask if anyone had > tried this on this: > > I''m trying to run a dhcp-server on a dom0 over a vnic so that the > domU''s can get IP addresses. > > I created a vnic r1 over e1000g0 and gave it a static IP > 172.0.94.111/24 so I can run the dhcp server over this vnic. > > root@lm2-dom0:~# dhtadm -P > Name Type Value > =================================================> 172.0.94.0 > Macro > :Subnet > = > 255.255.255.0 > :Router > = > 172.0.94.111 > :Broadcst > =172.0.94.255:NISdmain="celab.sfbay.sun.com":NISservs=129.146.17.35: > lm2-dom0 > Macro > :Include > = > Locale:Timeserv > = > 10.5.184.94 > :LeaseTim=86400:LeaseNeg:DNSdmain="network.com":DNSserv=129.147.9.5: > Locale Macro :UTCoffst=-28800: > > Partial output of pntadm > root@lm2-dom0:~# pntadm -P 172.0.94.0 > Client ID Flags Client IP Server IP Lease > Expiration Macro Comment > > 00 00 172.0.94.189 172.0.94.111 > Zero 172.0.94.0 > 00 00 172.0.94.188 172.0.94.111 > Zero 172.0.94.0 > > Running in.dhcpd in debug mode I see: > > root@lm2-dom0:~# /usr/lib/inet/in.dhcpd -dv -i r1,e1000g0 > 4b06de9c: Daemon Version: 3.5 > 4b06de9c: Maximum relay hops: 4 > 4b06de9c: Run mode is: DHCP Server Mode. > 4b06de9c: Datastore resource: SUNWfiles > 4b06de9c: Location: /var/dhcp > 4b06de9c: DHCP offer TTL: 10 > 4b06de9c: ICMP validation timeout: 1000 milliseconds, Attempts: 1. > 4b06de9c: Owner IP address: 127.0.0.1 > 4b06de9c: Maximum concurrent clients: 8192 > 4b06de9c: Maximum threads: 2048 > 4b06de9c: Read 3 entries from DHCP macro database on Fri Nov 20 > 10:23:24 2009 > 4b06de9c: Monitor (0003/e1000g0) started... > 4b06de9c: Thread Id: 0003 - Monitoring Interface: e1000g0 ***** > 4b06de9c: MTU: 1500 Type: SOCKET > 4b06de9c: Broadcast: 10.5.187.255 > 4b06de9c: Netmask: 255.255.252.0 > 4b06de9c: Address: 10.5.184.94 > 4b06de9c: Monitor (0004/r1) started... > 4b06de9c: Thread Id: 0004 - Monitoring Interface: r1 ***** > 4b06de9c: MTU: 1500 Type: SOCKET > 4b06de9c: Broadcast: 172.0.94.255 > 4b06de9c: Netmask: 255.255.255.0 > 4b06de9c: Address: 172.0.94.111 > 4b06dea3: Datagram received on network device: r1(limited broadcast) > 4b06dea3: Datagram received on network device: e1000g0(limited > broadcast) > 4b06dea3: e1000g0(limited broadcast): There is no 10.5.184.0 dhcp- > network table for DHCP client''s network. > > > When I bring up my domU I see the DHCPDISCOVER request in the domO > but the dhcpserver is not issuing IP address. > ETHER: ----- Ether Header ----- > ETHER: > ETHER: Packet 4 arrived at 10:15:12.70426 > ETHER: Packet size = 342 bytes > ETHER: Destination = ff:ff:ff:ff:ff:ff, (broadcast) > ETHER: Source = 0:16:3e:0:0:e4, > ETHER: Ethertype = 0800 (IP) > ETHER: > IP: ----- IP Header ----- > IP: > IP: Version = 4 > IP: Header length = 20 bytes > IP: Type of service = 0x00 > IP: xxx. .... = 0 (precedence) > IP: ...0 .... = normal delay > IP: .... 0... = normal throughput > IP: .... .0.. = normal reliability > IP: .... ..0. = not ECN capable transport > IP: .... ...0 = no ECN congestion experienced > IP: Total length = 328 bytes > IP: Identification = 44595 > IP: Flags = 0x4 > IP: .1.. .... = do not fragment > IP: ..0. .... = last fragment > IP: Fragment offset = 0 bytes > IP: Time to live = 255 seconds/hops > IP: Protocol = 17 (UDP) > IP: Header checksum = cc71 > IP: Source address = 0.0.0.0, OLD-BROADCAST > IP: Destination address = 255.255.255.255, BROADCAST > IP: No options > IP: > UDP: ----- UDP Header ----- > UDP: > UDP: Source port = 68 > UDP: Destination port = 67 (BOOTPS) > UDP: Length = 308 > UDP: Checksum = 0000 (no checksum) > UDP: > DHCP: ----- Dynamic Host Configuration Protocol ----- > DHCP: > DHCP: Hardware address type (htype) = 1 (Ethernet (10Mb)) > DHCP: Hardware address length (hlen) = 6 octets > DHCP: Relay agent hops = 0 > DHCP: Transaction ID = 0xd6054229 > DHCP: Time since boot = 12 seconds > DHCP: Flags = 0x0000 > DHCP: Client address (ciaddr) = 0.0.0.0 > DHCP: Your client address (yiaddr) = 0.0.0.0 > DHCP: Next server address (siaddr) = 0.0.0.0 > DHCP: Relay agent address (giaddr) = 0.0.0.0 > DHCP: Client hardware address (chaddr) = 00:16:3E:00:00:E4 > DHCP: > DHCP: ----- (Options) field options ----- > DHCP: > DHCP: Message type = DHCPDISCOVER > DHCP: Maximum DHCP Message Size = 1472 bytes > DHCP: IP Address Lease Time = -1 seconds > DHCP: Client Class Identifier = "SUNW.i86xpv" > DHCP: Requested Options: > DHCP: 1 (Subnet Mask) > DHCP: 3 (Router) > DHCP: 6 (DNS Servers) > DHCP: 12 (Client Hostname) > DHCP: 15 (DNS Domain Name) > DHCP: 28 (Broadcast Address) > DHCP: 43 (Vendor Specific Options) > > > Any suggestions or obvious thing that seems to be wrong it this setup? > > > thanks, > > Sagun >
Sagun, I''m confused about your configuration. You say:> On system A the setup I have is: > dom0+ dhcpserver(domU running a DHCP-server) + dhcpclientA (domU tryng > to obtain an IP address via dhcp)Yet your in.dhcpd invocation mentions e1000g0:> root@lm2-dom0:~# /usr/lib/inet/in.dhcpd -dv -i r1,e1000g0The domU can''t access e1000g0, so how can you be running in.dhcpd there? dme. -- David Edmondson, Sun Microsystems, http://dme.org
Sorry my configuration in the first email was - dom0+ dhcpserver(dom0
running a DHCP-server) that is why you see e1000g0 as well along with
the r1 (vnic interface).
However in my new configuration i.e dom0+ UC-dhcp (dhcpserver domU
running a DHCP-server) + UC-web (domU trying to obtain an IP address
via dhcp)
The issue I see is the domU UC-web doesn''t get an IP address.
Here is what I have:
On dom0
root@lm1-dom0:~# virsh list
Id Name State
----------------------------------
0 Domain-0 running
5 UC-web blocked
8 UC-dhcp blocked
- UC-base shut off
root@lm1-dom0:~# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
inet 10.5.184.84 netmask fffffc00 broadcast 10.5.187.255
ether 0:1e:68:49:96:98
r1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 11
inet 172.0.84.111 netmask ffffff00 broadcast 172.0.84.255
ether 2:8:20:e8:96:93
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu
8252 index 1
inet6 ::1/128
on the domU (UC-dhcp)
bash-3.2# ifconfig xnf0
xnf0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
inet 172.0.84.1 netmask ffffff00 broadcast 172.0.84.255
ether 0:16:3e:7c:9b:a2
bash-3.2# dhtadm -P
Name Type Value
=================================================172.0.84.0
Macro
:Subnet
=255.255.255.0:Router=172.0.84.111:Broadcst=172.0.84.255:
UC-dhcp
Macro
:Include
=
Locale:Timeserv
=
172.0.84.1
:LeaseTim=86400:LeaseNeg:DNSdmain="network.com":DNSserv=129.147.9.5:
Locale Macro :UTCoffst=-18000:
bash-3.2# pntadm -P 172.0.84.0
Client ID Flags Client IP Server IP Lease
Expiration Macro Comment
00 00 172.0.84.189 172.0.84.1
Zero 172.0.84.0
00 00 172.0.84.188 172.0.84.1
Zero 172.0.84.0
[snip]
bash-3.2# /usr/lib/inet/in.dhcpd -dv
4b0d283d: Daemon Version: 3.5
4b0d283d: Maximum relay hops: 4
4b0d283d: Run mode is: DHCP Server Mode.
4b0d283d: Datastore resource: SUNWfiles
4b0d283d: Location: /var/dhcp
4b0d283d: DHCP offer TTL: 10
4b0d283d: ICMP validation timeout: 1000 milliseconds, Attempts: 1.
4b0d283d: Owner IP address: 172.0.84.1
4b0d283d: Maximum concurrent clients: 1024
4b0d283d: Maximum threads: 256
4b0d283d: Read 3 entries from DHCP macro database on Wed Nov 25
07:51:09 2009
4b0d283d: Monitor (0003/xnf0) started...
4b0d283d: Thread Id: 0003 - Monitoring Interface: xnf0 *****
4b0d283d: MTU: 1500 Type: SOCKET
4b0d283d: Broadcast: 172.0.84.255
4b0d283d: Netmask: 255.255.255.0
4b0d283d: Address: 172.0.84.1
Running snoop on domU (UC-dhcp):
bash-3.2# snoop -v -i /var/tmp/snoop.out
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 1 arrived at 7:54:13.78628
ETHER: Packet size = 342 bytes
ETHER: Destination = ff:ff:ff:ff:ff:ff, (broadcast)
ETHER: Source = 0:16:3e:48:ee:66,
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: .... ..0. = not ECN capable transport
IP: .... ...0 = no ECN congestion experienced
IP: Total length = 328 bytes
IP: Identification = 11774
IP: Flags = 0x4
IP: .1.. .... = do not fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 255 seconds/hops
IP: Protocol = 17 (UDP)
IP: Header checksum = 4ca7
IP: Source address = 0.0.0.0, OLD-BROADCAST
IP: Destination address = 255.255.255.255, BROADCAST
IP: No options
IP:
UDP: ----- UDP Header -----
UDP:
UDP: Source port = 68
UDP: Destination port = 67 (BOOTPS)
UDP: Length = 308
UDP: Checksum = 0145
UDP:
DHCP: ----- Dynamic Host Configuration Protocol -----
DHCP:
DHCP: Hardware address type (htype) = 1 (Ethernet (10Mb))
DHCP: Hardware address length (hlen) = 6 octets
DHCP: Relay agent hops = 0
DHCP: Transaction ID = 0xf1071626
DHCP: Time since boot = 0 seconds
DHCP: Flags = 0x0000
DHCP: Client address (ciaddr) = 0.0.0.0
DHCP: Your client address (yiaddr) = 0.0.0.0
DHCP: Next server address (siaddr) = 0.0.0.0
DHCP: Relay agent address (giaddr) = 0.0.0.0
DHCP: Client hardware address (chaddr) = 00:16:3E:48:EE:66
DHCP:
DHCP: ----- (Options) field options -----
DHCP:
DHCP: Message type = DHCPDISCOVER
DHCP: Maximum DHCP Message Size = 1472 bytes
DHCP: IP Address Lease Time = -1 seconds
DHCP: Client Class Identifier = "SUNW.i86xpv"
DHCP: Requested Options:
DHCP: 1 (Subnet Mask)
DHCP: 3 (Router)
DHCP: 6 (DNS Servers)
DHCP: 12 (Client Hostname)
DHCP: 15 (DNS Domain Name)
DHCP: 28 (Broadcast Address)
DHCP: 43 (Vendor Specific Options)
domU(UC-web) which is trying to obtain an IP address:
bash-3.2# ifconfig xnf0
xnf0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500
index 2
inet 0.0.0.0 netmask ff000000 broadcast 255.255.255.255
ether 0:16:3e:48:ee:66
Sagun
On Nov 25, 2009, at 1:08 AM, David Edmondson wrote:
> Sagun, I''m confused about your configuration. You say:
>
>> On system A the setup I have is:
>> dom0+ dhcpserver(domU running a DHCP-server) + dhcpclientA (domU
>> tryng
>> to obtain an IP address via dhcp)
>
> Yet your in.dhcpd invocation mentions e1000g0:
>
>> root@lm2-dom0:~# /usr/lib/inet/in.dhcpd -dv -i r1,e1000g0
>
> The domU can''t access e1000g0, so how can you be running in.dhcpd
> there?
>
> dme.
> --
> David Edmondson, Sun Microsystems, http://dme.org
* Sagun.Shakya@Sun.COM [2009-11-25 15:59:47]> Sorry my configuration in the first email was - dom0+ dhcpserver(dom0 > running a DHCP-server) that is why you see e1000g0 as well along with > the r1 (vnic interface). > > However in my new configuration i.e dom0+ UC-dhcp (dhcpserver domU > running a DHCP-server) + UC-web (domU trying to obtain an IP address > via dhcp) The issue I see is the domU UC-web doesn''t get an IP > address.Understood. If snoop in the domU sees the DHCP request yet no offer is made it sounds like a dhcpd configuration problem. I know nothing about that piece of software, sorry.> Running snoop on domU (UC-dhcp): > bash-3.2# snoop -v -i /var/tmp/snoop.out > ETHER: ----- Ether Header ----- > ETHER: > ETHER: Packet 1 arrived at 7:54:13.78628 > ETHER: Packet size = 342 bytes > ETHER: Destination = ff:ff:ff:ff:ff:ff, (broadcast) > ETHER: Source = 0:16:3e:48:ee:66, > ETHER: Ethertype = 0800 (IP) > ETHER: > IP: ----- IP Header ----- > IP: > IP: Version = 4 > IP: Header length = 20 bytes > IP: Type of service = 0x00 > IP: xxx. .... = 0 (precedence) > IP: ...0 .... = normal delay > IP: .... 0... = normal throughput > IP: .... .0.. = normal reliability > IP: .... ..0. = not ECN capable transport > IP: .... ...0 = no ECN congestion experienced > IP: Total length = 328 bytes > IP: Identification = 11774 > IP: Flags = 0x4 > IP: .1.. .... = do not fragment > IP: ..0. .... = last fragment > IP: Fragment offset = 0 bytes > IP: Time to live = 255 seconds/hops > IP: Protocol = 17 (UDP) > IP: Header checksum = 4ca7 > IP: Source address = 0.0.0.0, OLD-BROADCAST > IP: Destination address = 255.255.255.255, BROADCAST > IP: No options > IP: > UDP: ----- UDP Header ----- > UDP: > UDP: Source port = 68 > UDP: Destination port = 67 (BOOTPS) > UDP: Length = 308 > UDP: Checksum = 0145 > UDP: > DHCP: ----- Dynamic Host Configuration Protocol ----- > DHCP: > DHCP: Hardware address type (htype) = 1 (Ethernet (10Mb)) > DHCP: Hardware address length (hlen) = 6 octets > DHCP: Relay agent hops = 0 > DHCP: Transaction ID = 0xf1071626 > DHCP: Time since boot = 0 seconds > DHCP: Flags = 0x0000 > DHCP: Client address (ciaddr) = 0.0.0.0 > DHCP: Your client address (yiaddr) = 0.0.0.0 > DHCP: Next server address (siaddr) = 0.0.0.0 > DHCP: Relay agent address (giaddr) = 0.0.0.0 > DHCP: Client hardware address (chaddr) = 00:16:3E:48:EE:66 > DHCP: > DHCP: ----- (Options) field options ----- > DHCP: > DHCP: Message type = DHCPDISCOVER > DHCP: Maximum DHCP Message Size = 1472 bytes > DHCP: IP Address Lease Time = -1 seconds > DHCP: Client Class Identifier = "SUNW.i86xpv" > DHCP: Requested Options: > DHCP: 1 (Subnet Mask) > DHCP: 3 (Router) > DHCP: 6 (DNS Servers) > DHCP: 12 (Client Hostname) > DHCP: 15 (DNS Domain Name) > DHCP: 28 (Broadcast Address) > DHCP: 43 (Vendor Specific Options) > > domU(UC-web) which is trying to obtain an IP address: > bash-3.2# ifconfig xnf0 > xnf0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2 > inet 0.0.0.0 netmask ff000000 broadcast 255.255.255.255 > ether 0:16:3e:48:ee:66 > > Sagun > On Nov 25, 2009, at 1:08 AM, David Edmondson wrote: > > Sagun, I''m confused about your configuration. You say: > > On system A the setup I have is: > > dom0+ dhcpserver(domU running a DHCP-server) + dhcpclientA (domU tryng > > to obtain an IP address via dhcp) > > Yet your in.dhcpd invocation mentions e1000g0: > > root@lm2-dom0:~# /usr/lib/inet/in.dhcpd -dv -i r1,e1000g0 > > The domU can''t access e1000g0, so how can you be running in.dhcpd there? > > dme. > -- > David Edmondson, Sun Microsystems, http://dme.orgdme. -- David Edmondson, Sun Microsystems, http://dme.org