similar to: Failed boot of xVM on an AMD Turion 64 X2 TL-52 based laptop (with 4GB RAM) ...

Hi all Opensolaris works perfectly, but I am not able to boot the xvm kernel on this hardware. I added the -k option in grub, but the system hangs before the hostname line without any debug info. I''ve tried snv from b94 to b99, with the same results. If I install Debian with xen kernel I am able to use pvm and hvm guests. What can I do ? thanks Giacomo -- This message posted from

Hi, I have installed b_78 on a Dell 2950 and booting to bare metal works fine but when I try to boot using the grub entry Solaris xVM it will boot to the point where it displays the uname info and then just stays there. It will not boot past that point. I have enabled VT technology in the BIOS (but only after the installation). Where/what can I look at to trouble shoot this? I am new to xen and

> http://blogs.sun.com/ptelles/entry/sun_xvm_hypervisor_ > part_i Hello, I can''t get this to work. My pc just reboots after "Syncing filesystem" when I try to boot into xVM Hypervisor. I have a clean install of OpenSolaris 2008.11. -- This message posted from opensolaris.org

Hi all, I have a Toshiba Tecra M9 and have not been able to boot it dom0. This is running SXDE 01/08, snv79b. After booting under kmdb and setting moddebug=80000000 before booting the Solaris kernel (with help from Dan Mick), I was able to see mac_ether as the last thing loading, right after loading the e1000g driver. I cannot drop into kmdb via F1-A after it hangs. I''ve also

After BFU-ing my system to b75 I ended up with a panicing system when booting into Xen: grub> #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- grub> title Solaris on Xen grub> kernel$ /boot/$ISADIR/xen.gz grub> module$ /platform/i86xpv/kernel/$ISADIR/unix /platform/i86xpv/kernel/$ISADIR/unix -B console=ttyb grub> module$ /platform/i86pc/$ISADIR/boot_archive grub>

Hi, I have an x86 box with two boot disks. Each disk contains a BE, and I upgrade from one to the other. When trying to do a lumake from 75 to 76, and again from 76 to 77 I have the following error from lumake: ERROR: The system must be rebooted after applying required patches. Please reboot and try again. ERROR: Cannot make the boot environment. I only get this error if I''m

Hi, I am encountering a sad problem. HP disabled the AMD-V extension in the BIOS for the nx6325 model. It has an AMD Turion 64bit TL-60. I read about that xen 3.1 would recognize if this flag is disabled. Would it be possible to enable this extension over xen as a consequence when it recognizes it? Or has somone from the community an idea how to do that? Roman This message posted from

Hi All, I am running nevada 79 BFU''ed to 82. The machine is a Ultra 20 with 4GB memory. I have several Windows XP domU''s configured and registered. When ever I try to start the fourth domain I get an out of memory exception: Not enough memory is available, and dom0 cannot be shrunk any further Each of my domains only uses 256 so I thought there would be sufficient memory

Hello, I''m using the latest b75 ISO to try and get a solaris dom0 running on my laptop, a Sony SZ-330P. The Xen LiveCD works just fine, so I know that theoretically it should work. Build 75 also works just fine on my Sony, including sound and video, etc. But when I try and boot the Xen kernel, the system hangs. There''s no panic printed to console. If I pass a -v option at

Hi Lin, In addition to bug 6541114... Bug ID 6541114 Synopsis GRUB/ZFS fails to load files from a default compressed (lzjb) root ... I found yet another way to get the "Error 16: Inconsistent filesystem structure" from GRUB. This time when trying to boot a Xen Dom0 from a zfs bootfs Synopsis: grub/zfs-root: cannot boot xen from a zfs root

I have a Sony lib-162 tape library hooked up to an adaptec 39160 scsi controller. I''m running OpenSolaris / Indiana snv_98 with the CADP160 driver installed from a SXCE dvd (snv_99). When I boot without xvm, I can run "mt config" and see the configuration information for the first drive in the library. Under xvm, some scsi operations still work - I can access the changer, move

hey all...just curious if anyone has dealt with any issues regarding installing centos x86_64 on a laptop running with an AMD turion 64 bit processor -- Andrew Rice Jr Systems Analyst Carrier Management Systems, Inc. 500 Chestnut Street, Suite 500 Abilene, TX 79602 USA support: (325) 672-0975 office: (325) 677-5900 fax: (325) 676-0529 http://www.nams.net NAMS III, NAMS 2000 Centralized, NAMS

Hi I have a new ASUS A6Tc laptop with 1.6 GHz AMD Turion dual core processor. I get a strange error: <4>0000:00:0b.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4 <4>0000:00:0b.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 This only occurs when booting into the xen kernel, not without xen. Can someone tell me why and how it can be fixed? Art

Hi unfortunately VirtualBox does not work yet in a Solaris Dom0: I installed VirtualBox beta and it runs fine on bare metal. Unfortunately the necessary driver does not load automatically in a xVM Dom0. It can be loaded manually but it looks like it does not work in a Dom0: bash-3.2# modinfo | grep vbox # this is a one time task: bash-3.2# cp /platform/i86pc/kernel/drv/amd64/vboxdrv

Hi folks. This is probably a dumb question, but i''m not sure where to start. I have snv_80 running and booting into xVM with no problems. I am wondering if my hardware supports running Windows Vista in a virtual machine? I have a Dell Precision M6300 In particular, I''m wondering if my graphics card and wired/wireless NIC are going to work? Vid card: Nvidia Quadro M1600 wired

Using build 70, I followed the zfsboot instructions at http:// www.opensolaris.org/os/community/zfs/boot/zfsboot-manual/ to the letter. I tried first with a mirror zfsroot, when I try to boot to zfsboot the screen is flooded with "init(1M) exited on fatal signal 9" Than I tried with a simple zfs pool (not mirrored) and it just reboots right away. If I try to setup grub

Hi Dave, I built successfully an xvm 3.3 system. However, I found virt-manager and virt-install don''t work. I attached the error messages of both as below. xm tool seems to work. I can run OpenSolaris200811 LiveCD and install it onto file based disk. The error messages of virt-manager: ====start of error message==== Unable to open connection to hypervisor URI ''xen'':

Is it possible to convert Solaris 10 DomU from hvm to pv?? Dom0 is Opensolaris b132. Possibly any Documentation about this? Here is config of Solaris DomU: <domain type=''xen'' id=''1''> <name>Solaris-10</name> <uuid>c505f6c3-b37b-8268-fe46-f10b3277238b</uuid> <memory>2097152</memory>

Apparently the b89 xvm-src.tar.bz2 tar bz2 archive is corrupted / truncated on the b89 source download page: http://dlc.sun.com/osol/on/downloads/b89/ http://dlc.sun.com/osol/on/downloads/b89/xvm-src.tar.bz2 In the past, the xvm-src.tar.bz2 file had a size of ~ 100 mbytes; with b89 the size of the downloadable archive is only 72 mbytes. And bzip2 complains: % bzip2 -tv

Hi all, I''m in the process of building a home server with OpenSolaris 2009.06. It''s main function is to serve files (hence using OpenSolaris for some ZFS goodness), but I want to host some Windows x64 VMs on it as well. Given that there are currently no x64 Windows drivers for xVM, I was thinking of starting with VirtualBox (which does have x64 Windows drivers), and then