similar to: SATA detect fails on ICH7 chipset / Dell Poweredge SC430

Anyone knows if the SC430, based on the Intel E7230 chipset, is compatible with the Digium cards? I've tried the compatibility page on digium's website. It seems like they've pulled the old compatibility list, now the links on the page only point back to the product pages. Over here, Dell is selling (for a short period of time), SC430 with Pentium D 820 Dual Core Processor 2.8GHz,

Dear gurus, Three DELL SC430s were purchased by my company a few months back and I've been told that when they spoke with the DELL representatives, they were informed that these servers were fully RHEL 4.0 compatible. Specs of the servers:- - Pentium 4 - 2.8 GHz - 1 GB RAM - 2x 250GB SATA HDDs I tried installing CentOS 4.0 on it but it doesn't seem to be able to detect any hard

I was wondering how the Dell SC420 will perform under normal office to office communications. We would equip each server with a T1 card to make office to office SIP calls. They will integrate into our existing PBX systems. Does anyone on this list use this hardware currently???? Thanks!

We're using an SC420 and using BRI with a quadbri Junganns card, with IAX softphones and one hardphone. Working well except that we sometimes get dropped connections between IAX and the server with a max retries exceed message, which comes from the chan_iax driver code. The BRI side of things looks like it is fine. I had been thinking it might be a network issue but now wonder if it is an

On 31/08/05, Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> wrote: > Please can you try searching for bios updates etc. I have an almost > identical pre-release Dell machine that Xen works fine on. A00 came installed and is the latest. > Please can you post the ouput of ''lspci -v''. My sata controller is a rev > 03, prog-if 8f, ''Unknown device 5656''

Thanks! So aside from the lack of redundancy, will it perform well and scale to utilize a full T1's worth of calls through to the legacy PBX? We would probably build a backup server from old equipment and rsync the configuration files. Thanks again! > -----Original Message----- > From: William Boehlke [mailto:william.boehlke@signate.com] > Sent: Friday, May 20, 2005 3:33 PM >

The cheap ones on EBay won't work with the SC420 server. I have one and can't make any of the clones work. I do have one TDM40B card for analog stations that works well. The problem with the SC420 is that it won't let you set the interrupts yourself and you end up with interrupts being shared. =============================================================== Message: 26 Date:

jglucky@blueware.net wrote: > Has anyone attempted or have had any issues getting Asterisk and > Digium cards working on a Dell SC420 server? I have it up and running on 2 SC420's with TE110P cards. Haven't had any problems as of yet (knock on wood). Dell SC420 TE110P 2x40 GB SATA drive in a RAID 1 setup (Linux 2.6 kernel needed for SATA drives; turn off RAID detection in BIOS).

Hi, I am attempting to connect my dell SC420 to a 32" LCD at 1366x768. I have attached my currect config file and currect X start log. How do I massage the xorf file to run at the native resolution of the LCD? It currently runs but is in a virtual mode. The screen scrolls. Any help is appreciated. I am using Centos 4.1. Jerry -------------- next part -------------- An embedded and

Please can you do an ''lspci -nv'' to find out the exact version of your controller. I''m wandering whether it features in pci/quirks.c and whether the fixup code is borked on Xen. Also, have you tried fiddling around with any of the BIOS IDE legacy mode settings? There really is no good explanation for a) why the MMIO region is so low on native, and b) why it is

Hey everyone, I've been doing a lot of research into a decent server for Asterisk but I seem to be running and circles and now I am turning to you. The issue I have is it needs to be rack mountable (so a Dell SC430 isn't going to work) and preferably have 3 pci ports. The problem that I seem to be running into is that when I look at servers from Dell or IBM or the like they only seem to

Hi people I am new to Xen and having some trouble getting it up and running. I am trying to install it on a Dell Poweredge SC420 that has CentOS (RHEL3 clone) installed. The error that I am getting when I first try to boot into the Xen kernel, after having installed the binary and adding the necessary lines to grub.conf is : ---snip--- md: Autodetecting RAID arrays md: autorun ... md: ...

Are there any easy to use snmp(mainly temperature monitoring) tools around for Centos -4? This is on a Dell sc420 server. -- Computer House Calls, Networks, Security, Web Design: http://www.emmanuelcomputerconsulting.com What businesses are in Brunswick, Maryland? Check Brunswick First! http://www.checkbrunswickfirst.com My "Foundation" verse: Isa 54:17 No weapon that is formed

Has anyone on this list succesfully managed to get two (or more) TDM04 (with four FXO each) working on a Dell PowerEdge server? If so, which model? Was it a hassle? I'm doing a seven-line installation and a callbank seems like overkill, I just don't want to get suck with a PowerEdge that gets into an IRQ mess. Thanks in Advance, Tom Hayden

I am trying to hook up linux to an LCD 1333x768 LCD TV. XP in 1024x768 show up just fine. X does not. I have set the screen preferences to 1024x768. I have edited the xorf.conf file instead of have a range from 50 - 70 I change it to be only 60. I start X and it still comes up on my A70F monitor but still will not show on my LCD TV. xvidtune does not run on this PC. It says something about

hi all, What is the best Asterisk-compliant for Dell machine is recommended? I will have roughly 400 users in a production office. thanks!!

The SC420 does not support APIC (at least not with current BIOS). The Digium TDM400B card seems to always seek the same IRQ so it locks one down. The clone X100P cards often get a shared IRQ, even if vacant ones are available. I've found both the Digium card and the clones very frustrating with this system. Thus the reason Digium does not recommend it. I've gone to a mostly SIP

On 4/12/06, Ted Mittelstaedt <tedm@toybox.placo.com> wrote: > > >-----Original Message----- > >From: Ted Mittelstaedt [mailto:tedm@toybox.placo.com] > >Sent: Tuesday, April 11, 2006 6:04 PM > >To: Nikolas Britton > >Cc: Harrison Peter CSA BIRKENHEAD; freebsd-questions@freebsd.org > >Subject: RE: Timescale for 6.1-RELEASE... > > >

I am new to VOIP, Linux and Asterisk. Through a lot of reading (this list, voip-info.org, documentation, etc.), I successfully installed FC3 and * on a new Dell SC420 with two X100P connecting to two PSTN lines at my office. I've also installed AMP to help me configure IVRs, call groups, extensions, etc. I use a Handytone-286 ATA and x-lite clients on the internal network and all works

Hi, Earlier this day I started a thread about Skype not working with outgoing sound. Now I wonder if it's not a problem with my soundcard. I had a vague suspicion about this, but since it's way off the original topic, I decided to start a new thread about this. Here's what the soundcard looks like: [root at grossebertha etc]# lspci | grep -i audio 00:1b.0 Audio device: Intel