similar to: Atheros AR9287 PCI passthrough issue

Dear list-members! I am using OpenWRT (www.openwrt.org) on two accesspoints. Within OpenWRT, the wireless interface and the ethernet interface are bridged to one interface (br0). Those two accesspoints are standing quite far from one another. Their WLAN-cells do not cross each other, meaning I have an area in between the two accesspoints, where there is no accesspoint of the two accessible: a

Hi I have read the howto on qdisc''s a few times but I cant figure out how to use the shaping capabilities to serve my needs. In the village whera I live we have created a wireless local network consisting of 10 houses. One of these houses has an ADSL connection and services this connection to the other houses. To gain access to the network a member must have an accesspoint in client mode,

hi list members, my goal is to make one of my DomU''s act as a wireless accesspoint... So, i need it to have access to the pcmcia wlan card attached to dom0. But how ? when i give the pci=[] option to the domU config file its shows up with lspci but i cant use it... (on debian with module-assistent get rt2x00 in de DomU) Is it possible or would it be better to use a more direct interface

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

hello i wish to install (Active Directory & Domain Controller) & 802.1x Openradis so i could easy manage some User and a couple of Accesspoint i have a question about this https://wiki.samba.org/index.php/Setting_up_Samba_as_an_Active_Directory_Domain_Controller Provisioning Samba AD in Interactive Mode what does Realm mean and Domain would this be only "example.com" have a

I'm having a wireless connection issue with an HP laptop and a Zotac media server after the 6.4 package updates from CR repository. Nothing changed with wireless config as far as I can tell. Both have been working fine with previous releases of 6.x. Oddly, if a cat 5 cable is connected for a few seconds and then disconnected the wireless works fine and survives a 'service network

Reindl Harald <h.reindl <at> thelounge.net> writes: >bloatware means unsecure, uncomfortable webinterfaces with limited >functionality compared what iptables alone offers you with some knowledge > all that embedded crap is for people which needs handholding and have > fun to own a dozen of halfbaken devices instead just one real box It seems you still have some

changed mode from router to switch on 2 Linux and 2 WinXP nodes. configured Linux bridging per the website and that worked for hardwired ethernet over cat5. For the wifi wireless xp clients, i didnt have any luck. Maybe i did something wrong, but it seems so easy to create a bridge in xp. highlight 2 or more nics, right click and choose bridge. Did it numerous tmes years ago, but not sure w

Am 12.03.2016 um 12:16 schrieb Andy Walsh: > Reindl Harald <h.reindl <at> thelounge.net> writes: > >> bloatware means unsecure, uncomfortable webinterfaces with limited >> functionality compared what iptables alone offers you with some knowledge > >> all that embedded crap is for people which needs handholding and have >> fun to own a dozen of halfbaken

Reindl Harald <h.reindl <at> thelounge.net> writes: > no, it's not for the masses, for the masses is what comes out-of-the-box > > there is not much difference between replace the operating system on a > mass-product and just setup my own box from-scratch in the end > i know what modern arm based devices can do > > the HP microserver comes with a >

:) ... the long lease is for some Accesspoints which we dont like to configure static, just plug in and run. /G?tz Am 06.07.16 um 10:24 schrieb Eero Volotinen: > DHCP uses FFFFFFFF16 to represent an infinite lease. Try if it's supported. > Anyway, it's insane value as year lease time :) > > Eero > > 2016-07-06 11:22 GMT+03:00 G?tz Reinicke - IT Koordinator < >

Hi, I'm inter-connecting AccessPoints using a tinc mesh and have bridge-nodes to bridge this vpn into some existing backbone. The AccessPoints bridge their users into 802.1q VLANs (per WiFi-Client, there can be multiple VLANs active on each AP) in the tinc mesh, and the bridge nodes bridge some vlans into the backbone. Now there is a router in the backbone that uses the same MAC on all VLANs,

On 10/23/2021 11:11 AM, Hans van Kranenburg wrote: > Hi! > > On 10/19/21 5:44 AM, Chuck Zmudzinski wrote: >> On 5/10/2021 1:33 PM, Chuck Zmudzinski wrote: >>> [...] with buster and bullseye running as the Dom0, I can only get the VGA/Passthrough feature to work with Windows Xen HVMs. I would expect both Windows and Linux HVMs to work comparably well. > You don't

The situation is this: INTERNET -- ROUTER -- ETHERNET+WIFI -- PC's The conection between INTERNET and ROUTER is done with 2 LINKs with static IP's. The conection between ROUTER and PC's is done via ETHERNET lan with many bridges and ACCESSPOINTS. The PC's are in a IP subnet, the BRIDGES in another IP subnet, the AP's in another IP subnet. The ROUTER has 1 bridge interface

Hi all, Im preparing a quote for a 5 Star hotel, planning to have around 100 SIP Wifi phones for PBX operations running on 100 AccessPoints. Network is running in ARUBA Networks - AP70 access points. The initial recommendation is to go for Hitachi Wifiphones, but i would like to know from the group the recommendations. Im planning to put up Asterisk as the PBX, Please advice me the do's and

Did anyone see the article? It''s the first time I really noticed that these little Linksys routers are such a fully fledged linux machine with a decent processor and a replacable firmware. I am now itching to get one to replace the multipurpose firewall desktop machine. Has anyone experimented with the current state of the firmware and how advanced you can get with tc rules? For

I try to setup SJphone on my PDA, but it does not register with Asterisk. I have setup a sip account on asterisk, ... Can anybody give me a hint? bye Ronald

Are there any other wireless IP phones out there other then the Cisco 7920?? -- James Moran <jmoran@potentialtech.com> Potential Technologies

Heya list, I need some advice/experience. Some of our customers are asking us about DECT solutions for their asterisk install. Some others will not go to asterisk if there won't be a DECT solution. They now have a Siemens or a Samsung PBX. Those PBX-es come with a DECT basestation and optionally repeaters etc. All those basestations speak some own protocol to the PBX, so we cannot use them

On Tue, Jan 06, 2015 at 12:31:20PM +0100, Michael Braun wrote: > I'm inter-connecting AccessPoints using a tinc mesh and have bridge-nodes to bridge this vpn into some existing backbone. > The AccessPoints bridge their users into 802.1q VLANs (per WiFi-Client, there can be multiple VLANs active on each AP) in the tinc mesh, and the bridge nodes bridge some vlans into the backbone. >