similar to: Am I running NUMA?

I do not seem to be able to get any where with the power management functions. I have had a look at the xenpm Wiki page, but it hasn''t helped. Its probably something completely obvious, but I can''t see it. I running Xen 3.4.0 on Centos 5.3 x86_64 using the gitco RPMs on an Intel S5000PSL motherboard with 2 x Xeon 5410s. Dom0 is running the latest Centos 5.3 kernel. My xm

Hi, Since a week or two I can''t create two of my three WinXP DomU''s anymore, the third one starts just fine. This is the basic error message I get: # xm create WinXPViaLilaGeert Using config file "./WinXPViaLilaGeert". Error: Creating domain failed: name=WinXPViaLilaGeert There is little information in this error message. /var/log/xen/xend.log has a little more:

Hello, I''m attempting to boot Xen 4.0.1 on a SuperMicro H8DGi-F motherboard and having not much luck. I can boot the 2.6.32.26 (or .27) kernels alone, but when I add Xen into the mix, I get consistent boot failure. I''ve tried Xen 4.0.1-release, 4.0.2-rc1-pre and 4.0.2-rc2-pre, all get the same failure. xen/next-2.6.37 works and boots great, but since netback isn''t

Hi, I would like to ask the proper or recommended way of upgrading xen...? I started with 3.1.0 then upgraded to 3.2.1 but now I am not able to use the original system. Since I am not satisfied[*] with the current setup I would try to upgrade to 3.3.1 but it would be nice if something went wrong I could downgrade it to 3.2.x... It is a pitty that booting the previous xen image does not work

Hi, I would like to ask the proper or recommended way of upgrading xen...? I started with 3.1.0 then upgraded to 3.2.1 but now I am not able to use the original system. Since I am not satisfied[*] with the current setup I would try to upgrade to 3.3.1 but it would be nice if something went wrong I could downgrade it to 3.2.x... It is a pitty that booting the previous xen image does not work

Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting

Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting

Patch 2/2 - Add flag to indicate that an exception event needs injecting, and to delay the ext interrupt injection. Remove unnecessary check of RFLAGS.IF for ExtInt injection. Applies cleanly to xen-unstable c/s 11831. Please apply to xen-unstable.hg. We would also want this patch to be in a 3.0.3-1 base whenever that is branched. Signed-off-by: Travis Betak <travis.betak@amd.com>

Hello, I have some diagnostic Info for you. Tried to get xen-4.0.1 working on another node of my cluster. Only difference: Newer revision of the Hardware. Exactly same Software Stack. Stack: Ubuntu Lucid 64bit, xen-4.0.1 from Source, selfbuilt linux-2.6.32.27 from xen/stable-2.6.32.x Nodes working: HP DL380G5 16GB (Intel X5460) Node not working: HP DL380G6 16GB (Intel X5550) Effect: Xen

>Thank you! It worked and I finally got a working kernel. Here is the kernel boot log: Sound great ! Though I ended with error from log below. Had no chance to fix it yet: ? CPU: AMD QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) Performance Events: PMU not available due to virtualization, using software events only. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-1 Severity: important The amd64 Dom0 crashes in early boot-stage. For debugging purpose I logged Kernel-Dump with minicom over Serial Console: System is: Dell Poweredge R710 2x Intel XEON X5650 96GB RAM Perc H200 SAS Controller 3x SAS-Drive I see a possible conjunction with Bug #600241 but acpi=off doesn't solve this problem. Regards,

Hi Tinc Mailing-Group, I am a bit stuck with firewalling rules at the moment. Maybe someone could please advise me a good rc.firewall script to use on my setup. If anyone runs an ipchains firewall script on their linux box which is ALSO running tinc, could they please mail it to me, for my perusal. I have tinc pre3 set up and working on my systems, however I can only get it to work if I set the

Hi everyone, I am working on a project whose goal is evaluating the performance of the vTPM Manager. For this project I am using Xen 4.1, Kernel 2.6.31.13 with Fedora11. I I finished all installation and configuration parts. Now I need to boot the system with Xen but while booting, it is freezing at the step "scrubbing free ram". What can be cause this problem and how can I figure it

Hi everyone, I am working on a project whose goal is evaluating the performance of the vTPM Manager. For this project I am using Xen 4.1, Kernel 2.6.31.13 with Fedora11. I I finished all installation and configuration parts. Now I need to boot the system with Xen but while booting, it is freezing at the step "scrubbing free ram". What can be cause this problem and how can I figure it

Dear Tinc Experts, I have been struggling for some time now, with Tinc pre3, and firewall rulesets and routing. I did once manage to get Tinc to work okay in a test-bed environment. I then tried to set it up for a 'real-life' setup and cannot get it to work properly. My real-life setup looks like this: Network A: 192.168.1.0 / 255.255.255.0 192.168.1.7 tap1 device gateway >

Sorry to have so many questions but I seem to have quite a few mini problems with my first Xen setup. My xen server works fine with Powernow on the standard Kernel but with the Xen kernel it fails. Does anyone know why? Details below. With Standard Kernel powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 8350 processors (8 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x0

On Sun, Oct 29, 2017 at 11:51:55PM +0100, Fengguang Wu wrote: >Hi Linus, > >Up to now we see the below boot error/warnings when testing v4.14-rc6. > >They hit the RC release mainly due to various imperfections in 0day's >auto bisection. So I manually list them here and CC the likely easy to >debug ones to the corresponding maintainers in the followup emails. >

On Sun, Oct 29, 2017 at 11:51:55PM +0100, Fengguang Wu wrote: >Hi Linus, > >Up to now we see the below boot error/warnings when testing v4.14-rc6. > >They hit the RC release mainly due to various imperfections in 0day's >auto bisection. So I manually list them here and CC the likely easy to >debug ones to the corresponding maintainers in the followup emails. >

# HG changeset patch # User Ian Campbell <ian.campbell at citrix.com> # Date 1304937815 -3600 # Node ID 35abcbcdf8bcabab6e0bbd929f69b613e167edfd # Parent 4b0692880dfa557d4e1537c7a58c412c1286a416 xen: ioapic: avoid gcc 4.6 warnings about uninitialised variables gcc 4.6 complains: io_apic.c: In function 'restore_IO_APIC_setup':

# HG changeset patch # User Ian Campbell <ian.campbell at citrix.com> # Date 1304937815 -3600 # Node ID 35abcbcdf8bcabab6e0bbd929f69b613e167edfd # Parent 4b0692880dfa557d4e1537c7a58c412c1286a416 xen: ioapic: avoid gcc 4.6 warnings about uninitialised variables gcc 4.6 complains: io_apic.c: In function 'restore_IO_APIC_setup':