Don Brearley
2011-Jan-19 18:59 UTC
[Xen-devel] [BUG] Problem Booting Xen 4.0.1 on 2.6.32.26/27
Hello, I''m attempting to boot Xen 4.0.1 on a SuperMicro H8DGi-F motherboard and having not much luck. I can boot the 2.6.32.26 (or .27) kernels alone, but when I add Xen into the mix, I get consistent boot failure. I''ve tried Xen 4.0.1-release, 4.0.2-rc1-pre and 4.0.2-rc2-pre, all get the same failure. xen/next-2.6.37 works and boots great, but since netback isn''t included in that yet, I am unable to actually use it for anything yet. Please feel free to contact me for further information. Email is fine, I''m also on IRC in ##xen as "breardo". Here is a log of the boot failure: (Xen 4.0.1 on 2.6.32.26 / Debian Squeeze beta2) (XEN) Xen version 4.0.1 (root@hibbing.edu) (gcc version 4.4.5 (Debian 4.4.5-8) ) Wed Jan 19 12:23:59 CST 2011 (XEN) Latest ChangeSet: Wed Aug 25 09:22:42 2010 +0100 21324:b536ebfba183 (XEN) Bootloader: GRUB 1.98+20100804-11 (XEN) Command line: dom0_mem=2048M loglvl=all guest_loglvl=all lapic=debug apic_verbosity=debug apic=debug iommu=off com2=115200,8n1 console=com2 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009a400 (usable) (XEN) 000000000009a400 - 00000000000a0000 (reserved) (XEN) 00000000000e6000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000d7e80000 (usable) (XEN) 00000000d7e8e000 - 00000000d7e90000 type 9 (XEN) 00000000d7e90000 - 00000000d7eb4000 (ACPI data) (XEN) 00000000d7eb4000 - 00000000d7ee0000 (ACPI NVS) (XEN) 00000000d7ee0000 - 00000000d8000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000ffe00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000428000000 (usable) (XEN) ACPI: RSDP 000FA320, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT D7E90100, 008C (r1 SMCI 20100909 MSFT 97) (XEN) ACPI: FACP D7E90290, 00F4 (r4 090910 FACP2028 20100909 MSFT 97) (XEN) ACPI: DSDT D7E90670, 6E54 (r2 1BC11 1BC11000 0 INTL 20051117) (XEN) ACPI: FACS D7EB4000, 0040 (XEN) ACPI: APIC D7E90390, 0118 (r2 090910 APIC2028 20100909 MSFT 97) (XEN) ACPI: MCFG D7E904B0, 003C (r1 090910 OEMMCFG 20100909 MSFT 97) (XEN) ACPI: OEMB D7EB4040, 00BC (r1 090910 OEMB2028 20100909 MSFT 97) (XEN) ACPI: HPET D7E9A670, 0038 (r1 090910 OEMHPET 20100909 MSFT 97) (XEN) ACPI: IVRS D7E9A6B0, 0100 (r1 AMD RD890S 202031 AMD 0) (XEN) ACPI: SRAT D7E9A7B0, 01D0 (r2 AMD F10 1 AMD 1) (XEN) ACPI: SLIT D7E9A980, 003C (r1 AMD F10 1 AMD 1) (XEN) ACPI: SSDT D7E9A9C0, 2854 (r1 A M I POWERNOW 1 AMD 1) (XEN) ACPI: EINJ D7E9D220, 0130 (r1 AMIER AMI_EINJ 20100909 MSFT 97) (XEN) ACPI: BERT D7E9D3B0, 0030 (r1 AMIER AMI_BERT 20100909 MSFT 97) (XEN) ACPI: ERST D7E9D3E0, 01B0 (r1 AMIER AMI_ERST 20100909 MSFT 97) (XEN) ACPI: HEST D7E9D590, 00A8 (r1 AMIER ABC_HEST 20100909 MSFT 97) (XEN) System RAM: 16382MB (16775272kB) (XEN) SRAT: PXM 0 -> APIC 16 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 17 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 18 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 19 -> Node 0 (XEN) SRAT: PXM 1 -> APIC 20 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 21 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 22 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 23 -> Node 1 (XEN) SRAT: PXM 2 -> APIC 36 -> Node 2 (XEN) SRAT: PXM 2 -> APIC 37 -> Node 2 (XEN) SRAT: PXM 2 -> APIC 38 -> Node 2 (XEN) SRAT: PXM 2 -> APIC 39 -> Node 2 (XEN) SRAT: PXM 3 -> APIC 32 -> Node 3 (XEN) SRAT: PXM 3 -> APIC 33 -> Node 3 (XEN) SRAT: PXM 3 -> APIC 34 -> Node 3 (XEN) SRAT: PXM 3 -> APIC 35 -> Node 3 (XEN) SRAT: Node 0 PXM 0 0-a0000 (XEN) SRAT: Node 0 PXM 0 100000-d8000000 (XEN) SRAT: Node 0 PXM 0 100000000-228000000 (XEN) SRAT: Node 3 PXM 3 228000000-428000000 (XEN) NUMA: Allocated memnodema(XEN) Reserving non-aligned node boundary @ mfn 0x228000 (XEN) Domain heap initialised DMA width 31 bits (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[d7eb400c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) (XEN) Processor #16 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) (XEN) Processor #17 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) (XEN) Processor #18 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) (XEN) Processor #19 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) (XEN) Processor #20 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) (XEN) Processor #21 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) (XEN) Processor #22 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled) (XEN) Processor #23 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x20] enabled) (XEN) Processor #32 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x21] enabled) (XEN) Processor #33 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x22] enabled) (XEN) Processor #34 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x23] enabled) (XEN) Processor #35 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x24] enabled) (XEN) Processor #36 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x25] enabled) (XEN) Processor #37 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x26] enabled) (XEN) Processor #38 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x27] enabled) (XEN) Processor #39 0:9 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) Overriding APIC driver with bigsmp (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Phys. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2000.099 MHz processor. (XEN) Initing memory sharing. (XEN) HVM: ASIDs enabled. (XEN) HVM: SVM enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) AMD Fam10h machine check reporting enabled (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 80050010 (XEN) Getting VERSION: 80050010 (XEN) Getting ID: 10000000 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000 (XEN) masked ExtINT on CPU#1 (XEN) masked ExtINT on CPU#2 (XEN) masked ExtINT on CPU#3 (XEN) masked ExtINT on CPU#4 (XEN) masked ExtINT on CPU#5 (XEN) masked Ex(XEN) masked ExtINT on CPU#9 (XEN) masked ExtINT on CPU#10 (XEN) masked ExtINT on CPU#11 (XEN) masked ExtINT on CPU#12 (XEN) masked ExtINT on CPU#13 (XEN) masked ExtINT on CPU#14 (XEN) masked ExtINT on CPU#15 (XEN) Total of 16 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 0-0, 0-16, 0-17, 0-18, 0-19, 0-20, 0-21, 0-22, 0-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #0 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #0...... (XEN) .... register #00: 00000000 (XEN) ....... : physical APIC id: 00 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00178021 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 1 (XEN) ....... : IO APIC version: 0021 (XEN) .... register #02: 00000000 (XEN) ....... : arbitration: 00 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 010 00 0 0 0 0 0 0 0 28 (XEN) 02 010 00 0 0 0 0 0 0 0 F0 (XEN) 03 010 00 0 0 0 0 0 0 0 F2 (XEN) 04 010 00 0 0 0 0 0 0 0 30 (XEN) 05 010 00 0 0 0 0 0 0 0 38 (XEN) 06 010 00 0 0 0 0 0 0 0 40 (XEN) 07 010 00 0 0 0 0 0 0 0 48 (XEN) 08 010 00 0 0 0 0 0 0 0 50 (XEN) 09 010 00 1 1 0 1 0 0 0 58 (XEN) 0a 010 00 0 0 0 0 0 0 0 60 (XEN) 0b 010 00 0 0 0 0 0 0 0 68 (XEN) 0c 010 00 0 0 0 0 0 0 0 70 (XEN) 0d 010 00 0 0 0 0 0 0 0 78 (XEN) 0e 010 00 0 0 0 0 0 0 0 88 (XEN) 0f 010 00 0 0 0 0 0 0 0 90 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ242 -> 0:3 (XEN) IRQ48 -> 0:4 (XEN) IRQ56 -> 0:5 (XEN) IRQ64 -> 0:6 (XEN) IRQ72 -> 0:7 (XEN) IRQ80 -> 0:8 (XEN) IRQ88 -> 0:9 (XEN) IRQ96 -> 0:10 (XEN) IRQ104 -> 0:11 (XEN) IRQ112 -> 0:12 (XEN) IRQ120 -> 0:13 (XEN) IRQ136 -> 0:14 (XEN) IRQ144 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 2000.0985 MHz. (XEN) ..... host bus clock speed is 200.0096 MHz. (XEN) ..... bus_scale = 0x0000CCD7 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer appears to have unexpectedly wrapped 10 or more times. (XEN) Platform timer is 14.318MHz HPET ΓΏ(XEN) Allocated console ring of 128 KiB. (XEN) do_IRQ: 1.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) do_IRQ: 2.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) do_IRQ: 3.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) do_IRQ: 4.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) do_IRQ: 5.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) do_IRQ: 6.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) do_IRQ: 7.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) do_IRQ: 8.231 No irq handler for vector (irq(XEN) do_IRQ: 9.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU9 resumed (XEN) do_IRQ: 10.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU10 resumed (XEN) do_IRQ: 11.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU11 resumed (XEN) do_IRQ: 12.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU12 resumed (XEN) do_IRQ: 13.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU13 resumed (XEN) do_IRQ: 14.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU14 resumed (XEN) Brought up 16 CPUs (XEN) do_IRQ: 15.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU15 resumed (XEN) HPET: 4 timers in total, 3 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) MCA: Use hw thresholding to adjust polling frequency (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1772000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000200000000->0000000220000000 (393216 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81772000 (XEN) Init. ramdisk: ffffffff81772000->ffffffff94409e00 (XEN) Phys-Mach map: ffffffff9440a000->ffffffff9480a000 (XEN) Start info: ffffffff9480a000->ffffffff9480a4b4 (XEN) Page tables: ffffffff9480b000->ffffffff948b4000 (XEN) Boot stack: ffffffff948b4000->ffffffff948b5000 (XEN) TOTAL: ffffffff80000000->ffffffff94c00000 (XEN) ENTRY ADDRESS: ffffffff814dc200 (XEN) Dom0 has maximum 16 VCPUs (XEN) Scrubbing Free RAM: ............................................................................................................................................done. (XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 258, t_info_first_offset 65 (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type ''CTRL-a'' three times to switch input to Xen) (XEN) Freed 176kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.32.26 (root@nx02) (gcc version 4.4.5 (Debian 4.4.5-8) ) #7 SMP Tue Jan 18 14:28:18 CST 2011 [ 0.000000] Command line: root=UUID=1450022f-b39e-413e-b750-7fb8f3d4e1f9 ro earlyprintk=xen nomodeset initcall_debug debug loglevel=10 console=hvc0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009a400 (usable) [ 0.000000] Xen: 000000000009a400 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] Xen: 00000000d7e8e000 - 00000000d7e90000 type 9 [ 0.000000] Xen: 00000000d7e90000 - 00000000d7eb4000 (ACPI data) [ 0.000000] Xen: 00000000d7eb4000 - 00000000d7ee0000 (ACPI NVS) [ 0.000000] Xen: 00000000d7ee0000 - 00000000d8000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000428000000 - 000000047fe80000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x47fe80 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new[ 0.000000] initial memory mapped : 0 - 153ff000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000 [ 0.000000] 0000000000 - 0080000000 page 4k [ 0.000000] kernel direct mapping tables up to 80000000 @ 100000-503000 [ 0.000000] init_memory_mapping: 0000000100000000-000000047fe80000 [ 0.000000] 0100000000 - 047fe80000 page 4k [ 0.000000] kernel direct mapping tables up to 47fe80000 @ 148b4000-16cc7000 [ 0.000000] RAMDISK: 01772000 - 14409e00 [ 0.000000] ACPI: RSDP 00000000000fa320 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000d7e90100 0008C (v01 SMCI 20100909 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000d7e90290 000F4 (v04 090910 FACP2028 20100909 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000d7e90670 06E54 (v02 1BC11 1BC11000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000d7eb4000 00040 [ 0.000000] ACPI: APIC 00000000d7e90390 00118 (v02 090910 APIC2028 20100909 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000d7e904b0 0003C (v01 090910 OEMMCFG 20100909 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000d7eb4040 000BC (v01 090910 OEMB2028 20100909 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000d7e9a670 00038 (v01 090910 OEMHPET 20100909 MSFT 00000097) [ 0.000000] ACPI: IVRS 00000000d7e9a6b0 00100 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SRAT 00000000d7e9a7b0 001D0 (v02 AMD F10 00000001 AMD 00000001) [ 0.000000] ACPI: SLIT 00000000d7e9a980 0003C (v01 AMD F10 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000d7e9a9c0 02854 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: EINJ 00000000d7e9d220 00130 (v01 AMIER AMI_EINJ 20100909 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000d7e9d3b0 00030 (v01 AMIER AMI_BERT 20100909 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000d7e9d3e0 001B0 (v01 AMIER AMI_ERST 20100909 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000d7e9d590 000A8 (v01 AMIER ABC_HEST 20100909 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 16 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 17 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 18 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 19 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 36 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 37 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 38 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 39 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 32 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 33 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 34 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 35 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-d8000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-228000000 [ 0.000000] SRAT: Node 3 PXM 3 228000000-428000000 [ 0.000000] SRAT: PXMs only cover 2047MB of your 3454MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 4 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000228000000 [ 0.000000] Skipping disabled node 1 [ 0.000000] Skipping disabled node 2 [ 0.000000] Node 3 MemBase 0000000228000000 Limit 0000000428000000 [ 0.000000] NUMA: Allocated memnodemap from 10040 - 10180 [ 0.000000] NUMA: Using 27 for the hash shift. [ 0.000000] Using node hash shift of 27 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000228000000 [ 0.000000] NODE_DATA [0000000000010180 - 000000000001817f] [ 0.000000] bootmap [0000000000019000 - 000000000005dfff] pages 45 [ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 0228000000] [ 0.0[ 0.000000] #1 [001480b000 - 00148b4000] XEN PAGETABLES ==> [001480b000 - 00148b4000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001647214] TEXT DATA BSS ==> [0001000000 - 0001647214] [ 0.000000] #4 [0001772000 - 0014409e00] RAMDISK ==> [0001772000 - 0014409e00] [ 0.000000] #5 [001440a000 - 001480b000] XEN START INFO ==> [001440a000 - 001480b000] [ 0.000000] #6 [0428000000 - 047fe80000] XEN EXTRA [ 0.000000] #7 [0001648000 - 0001656227] BRK ==> [0001648000 - 0001656227] [ 0.000000] #8 [0000100000 - 0000457000] PGTABLE ==> [0000100000 - 0000457000] [ 0.000000] #9 [00148b4000 - 0014cb6000] PGTABLE ==> [00148b4000 - 0014cb6000] [ 0.000000] #10 [0000010000 - 000001003c] ACPI SLIT ==> [0000010000 - 000001003c] [ 0.000000] #11 [0000010040 - 0000010180] MEMNODEMAP ==> [0000010040 - 0000010180] [ 0.000000] Bootmem setup node 3 0000000228000000-0000000428000000 [ 0.000000] NODE_DATA [0000000001657000 - 000000000165efff] [ 0.000000] bootmap [000000000165f000 - 000000000169efff] pages 40 [ 0.000000] (12 early reservations) ==> bootmem [0228000000 - 0428000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [001480b000 - 00148b4000] XEN PAGETABLES [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #3 [0001000000 - 0001647214] TEXT DATA BSS [ 0.000000] #4 [0001772000 - 0014409e00] RAMDISK [ 0.000000] #5 [001440a000 - 001480b000] XEN START INFO [ 0.000000] #6 [0428000000 - 047fe80000] XEN EXTRA [ 0.000000] #7 [0001648000 - 0001656227] BRK [ 0.000000] #8 [0000100000 - 0000457000] PGTABLE [ 0.000000] #9 [00148b4000 - 0014cb6000] PGTABLE [ 0.000000] #10 [0000010000 - 000001003c] ACPI SLIT [ 0.000000] #11 [0000010040 - 0000010180] MEMNODEMAP [ 0.000000] NODE_DATA(3) on node 0 [ 0.000000] bootmap(3) on node 0 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0047fe80 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] On node 0 totalpages: 524170 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 858 pages reserved [ 0.000000] DMA zone: 3064 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513080 pages, LIFO batch:31 [ 0.000000] Could not find start_pfn for node 3 [ 0.000000] On node 3 totalpages: 0 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x27] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000d7e8e000 [ 0.000000] PM: Registered nosave memory: 00000000d7e8e000 - 00000000d7e90000 [ 0.000000] PM: Registered nosave memory: 00000000d7e90000 - 00000000d7eb4000 [ 0.000000] PM: Registered nosave memory: 00000000d7eb4000 - 00000000d7ee0000 [ 0.000000] PM: Registered nosave memory: 00000000d7ee0000 - 00000000d8000000 [ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000428000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:57e8e000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:4 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88001682d000 s90264 r8192 d24424 u122880 [ 0.000000] pcpu-alloc: s90264 r8192 d24424 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 02 [0] 04 [0] 06 [0] 08 [0] 10 [0] 12 [0] 14 [ 0.000000] pcpu-alloc: [1] 01 [1] 03 [1] 05 [1] 07 [1] 09 [1] 11 [1] 13 [1] 15 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 516144 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=1450022f-b39e-413e-b750-7fb8f3d4e1f9 ro earlyprintk=xen nomodeset initcall_debug debug loglevel=10 console=hvc0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880016a16000 - ffff88001aa16000 [ 0.000000] DMA: software IO TLB at phys 0x16a16000 - 0x1aa16000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880016a16000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff88001aa76000 size=32768 [ 0.000000] Memory: 1673128k/18872832k available (3135k kernel code, 16776152k absent, 42[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=4 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:4352 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 (XEN) IOAPIC[0]: Set PCI routing entry (0-9 -> 0x58 -> IRQ 9 Mode:1 Active:1) [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 4351 on node 0 [ 0.000000] alloc kstat_irqs on node 0 (XEN) traps.c:2302:d0 Domain attempted WRMSR 00000000c0010004 from 0000a4ef:902fffcb to 00000000:00000000. (XEN) traps.c:2302:d0 Domain attempted WRMSR 00000000c0010000 from 0000030f:e08f1ff7 to 00000000:00430076. [ 0.000000] Detected 2013544.220 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.19 BogoMIPS (lpj=8000392) [ 0.004029] Security Framework initialized [ 0.004035] SELinux: Disabled at boot. [ 0.004529] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005295] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.005601] Mount-cache hash table entries: 256 [ 0.005751] Initializing cgroup subsys ns [ 0.005757] Initializing cgroup subsys cpuacct [ 0.005764] Initializing cgroup subsys devices [ 0.005769] Initializing cgroup subsys freezer [ 0.005774] Initializing cgroup subsys net_cls [ 0.005807] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.005813] CPU: L2 Cache: 512K (64 bytes/line) [ 0.005819] CPU 0/0x0 -> Node 0 [ 0.005824] tseg: 00d7f00000 [ 0.005827] CPU: Physical Processor ID: 0 [ 0.005831] CPU: Processor Core ID: 0 [ 0.005836] mce: CPU supports 6 MCE banks [ 0.005855] Performance Events: AMD PMU driver. [ 0.005861] ------------[ cut here ]------------ [ 0.005870] WARNING: at arch/x86/xen/enlighten.c:729 init_hw_perf_events+0x337/0x3d7() [ 0.005875] Hardware name: H8DG6/H8DGi [ 0.005879] Modules linked in: [ 0.005885] Pid: 0, comm: swapper Not tainted 2.6.32.26 #7 [ 0.005890] Call Trace: [ 0.005898] [] ? warn_slowpath_common+0x76/0x8c [ 0.005905] [] ? init_hw_perf_events+0x337/0x3d7 [ 0.005912] [] ? identify_boot_cpu+0x15/0x3d [ 0.005918] [] ? check_bugs+0x9/0x2e [ 0.005924] [] ? start_kernel+0x3cb/0x3e5 [ 0.005931] [] ? xen_start_kernel+0x5a4/0x5a8 [ 0.005941] ---[ end trace a7919e7f17c0a725 ]--- [ 0.005946] ... version: 0 [ 0.005950] ... bit width: 48 [ 0.005953] ... generic registers: 4 [ 0.005957] ... value mask: 0000ffffffffffff [ 0.005961] ... max period: 00007fffffffffff [ 0.005965] ... fixed-purpose events: 0 [ 0.005969] ... event mask: 000000000000000f [ 0.005986] SMP alternatives: switching to UP code [ 0.011476] ACPI: Core revision 20090903 [ 0.027823] alloc irq_desc for 4350 on node 0 [ 0.027830] alloc kstat_irqs on node 0 [ 0.027842] alloc irq_desc for 4349 on node 0 [ 0.027846] allo[ 0.027856] alloc kstat_irqs on node 0 [ 0.027862] alloc irq_desc for 4347 on node 0 [ 0.027866] alloc kstat_irqs on node 0 [ 0.027962] calling migration_init+0x0/0x4f @ 1 [ 0.027998] initcall migration_init+0x0/0x4f returned 0 after 0 usecs [ 0.028001] calling spawn_ksoftirqd+0x0/0x4f @ 1 [ 0.028031] initcall spawn_ksoftirqd+0x0/0x4f returned 0 after 3906 usecs [ 0.028038] calling init_call_single_data+0x0/0x7c @ 1 [ 0.028045] initcall init_call_single_data+0x0/0x7c returned 0 after 0 usecs [ 0.028051] calling spawn_softlockup_task+0x0/0x6b @ 1 [ 0.028075] initcall spawn_softlockup_task+0x0/0x6b returned 0 after 0 usecs [ 0.028081] calling relay_init+0x0/0x14 @ 1 [ 0.028086] initcall relay_init+0x0/0x14 returned 0 after 0 usecs [ 0.028092] calling tracer_alloc_buffers+0x0/0x182 @ 1 [ 0.028127] initcall tracer_alloc_buffers+0x0/0x182 returned 0 after 0 usecs [ 0.028133] calling init_trace_printk+0x0/0x11 @ 1 [ 0.028139] initcall init_trace_printk+0x0/0x11 returned 0 after 0 usecs [ 0.028220] installing Xen timer for CPU 1 [ 0.028225] alloc irq_desc for 4346 on node 0 [ 0.028229] alloc kstat_irqs on node 0 [ 0.028260] SMP alternatives: switching to SMP code [ 0.036001] alloc irq_desc for 4345 on node 0 [ 0.036001] alloc kstat_irqs on node 0 [ 0.036008] alloc irq_desc for 4344 on node 0 [ 0.036012] alloc kstat_irqs on node 0 [ 0.036018] alloc irq_desc for 4343 on node 0 [ 0.036022] alloc kstat_irqs on node 0 [ 0.036029] alloc irq_desc for 4342 on node 0 [ 0.036033] alloc kstat_irqs on node 0 [ 0.004000] Initializing CPU#1 [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.036285] installing Xen timer for CPU 2 [ 0.036299] alloc irq_desc for 4341 on node 0 [ 0.036303] alloc kstat_irqs on node 0 [ 0.036332] alloc irq_desc for 4340 on node 0 [ 0.036337] alloc kstat_irqs on node 0 [ 0.036344] alloc irq_desc for 4339 on node 0 [ 0.036348] alloc kstat_irqs on node 0 [ 0.036354] alloc irq_desc for 4338 on node 0 [ 0.036358] alloc kstat_irqs on node 0 [ 0.036365] alloc irq_desc for 4337 on node 0 [ 0.036368] allo(XEN) CPU counter reports 4094 correctable hardware errors that were not reported by the status MSRs _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Konrad Rzeszutek Wilk
2011-Jan-20 19:26 UTC
Re: [Xen-devel] [BUG] Problem Booting Xen 4.0.1 on 2.6.32.26/27
On Wed, Jan 19, 2011 at 12:59:12PM -0600, Don Brearley wrote:> Hello, > > I''m attempting to boot Xen 4.0.1 on a SuperMicro H8DGi-F motherboard and > having not much luck. I can boot the > 2.6.32.26 (or .27) kernels alone, but when I add Xen into the mix, I get > consistent boot failure. > > I''ve tried Xen 4.0.1-release, 4.0.2-rc1-pre and 4.0.2-rc2-pre, all get > the same failure. > > xen/next-2.6.37 works and boots great, but since netback isn''t included > in that yet, I am unable to actually use it > for anything yet.Whoa, it usually is the other way around..> > Please feel free to contact me for further information. Email is > fine, I''m also on IRC in ##xen as "breardo". > > Here is a log of the boot failure: (Xen 4.0.1 on 2.6.32.26 / Debian > Squeeze beta2) > > (XEN) Xen version 4.0.1 (root@hibbing.edu) (gcc version 4.4.5 (Debian > 4.4.5-8) ) Wed Jan 19 12:23:59 CST 2011 > (XEN) Latest ChangeSet: Wed Aug 25 09:22:42 2010 +0100 > 21324:b536ebfba183 > (XEN) Bootloader: GRUB 1.98+20100804-11 > (XEN) Command line: dom0_mem=2048M loglvl=all guest_loglvl=all > lapic=debug apic_verbosity=debug apic=debug iommu=off com2=115200,8n1 > console=com2Also add ''console_sync'' (or was it sync_console?). That should give us more data and see whether the failure was .. ..> [ 0.036368] allo(XEN) CPU counter reports 4094 correctable hardware > errors that were not reported by the status MSRshere or later on. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Apparently Analagous Threads
- Bug#603713: xen-hypervisor-4.0-amd64: amd64 Dom0-Kernel crashes in early boot-stage
- Xen hypervisor failed to startup when booting CPUs
- crash in nvmx_vcpu_destroy
- Bug#603727: xen-hypervisor-4.0-amd64: i386 Dom0 crashes after doing some I/O on local storage (software Raid1 on SAS-drives with mpt2sas driver)
- 3.5.0 dom0 crash on boot