Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I have no serial console on this box). I found a lot of suggested workarounds: - noapic as suggested in output gives an noapic isn''t support - acpi_skip_timer_override has no effect at all Thx, Florian (XEN) Initing memory sharing. (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 8005010 (XEN) Getting VERSION: 8005010 (XEN) Getting ID: 0 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 0x00000004 after: 0x0000000 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC (XEN) (XEN) ***************************************************** (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn''t work! Boot with apic_verbosity=debug and send a report. Then try booting with hte ''noapic'' option**************************** _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Ok, I setup a serial so I can, give you a full copy of output (also added some debug options I found) Booting a command list Loading Xen 4.1.2 ... Loading Linux x86_64-3.1.5-gentoo ... Loading initial ramdisk ... __ __ _ _ _ ____ \ \/ /___ _ __ | || | / | |___ \ \ // _ \ ''_ \ | || |_ | | __) | / \ __/ | | | |__ _|| |_ / __/ /_/\_\___|_| |_| |_|(_)_(_)_____| (XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0, pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Bootloader: GRUB 1.99 (XEN) Command line: placeholder sync_console console_to_ring com1=115200,8n1 console=com1,vga loglvl=all lapic=debug apic_verbosity=debug apic=debug (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bffc0000 (usable) (XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data) (XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS) (XEN) 00000000bfff0000 - 00000000c0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fee00000 - 00000000fef00000 (reserved) (XEN) 00000000ff780000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000140000000 (usable) (XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97) (XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97) (XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117) (XEN) ACPI: FACS BFFCE000, 0040 (XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97) (XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97) (XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97) (XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97) (XEN) System RAM: 4095MB (4193660kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000140000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) APIC boot state is ''xapic'' (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x508 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0] (XEN) ACPI: wakeup_vec[bffce00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 16 (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) ACPI: IRQ14 used by override. (XEN) ACPI: IRQ15 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: Not using MMCONFIG. (XEN) Table is not found! (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) (XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2611.867 MHz processor. (XEN) Initing memory sharing. (XEN) AMD K8 machine check reporting enabled (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 80050010 (XEN) Getting VERSION: 80050010 (XEN) Getting ID: 0 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1 (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed. (XEN) ...trying to set up timer as Virtual Wire IRQ... failed. (XEN) ...trying to set up timer as ExtINT IRQ... failed :(. (XEN) (XEN) **************************************** (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn''t work! Boot with apic_verbosity=debug and send a report. Then try booting with the ''noapic'' option**************************************** (XEN) (XEN) Reboot in five seconds... Am 20.12.2011 12:01, schrieb Florian Manschwetus:> Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I > have no serial console on this box). I found a lot of suggested > workarounds: > - noapic as suggested in output gives an noapic isn''t support > - acpi_skip_timer_override has no effect at all > > Thx, > Florian > > (XEN) Initing memory sharing. > (XEN) AMD-Vi: IOMMU not found! > (XEN) I/O virtualisation disabled > (XEN) Getting VERSION: 8005010 > (XEN) Getting VERSION: 8005010 > (XEN) Getting ID: 0 > (XEN) Getting LVT0: 700 > (XEN) Getting LVT1: 400 > (XEN) enabled ExtINT on CPU#0 > (XEN) ESR value before enabling vector: 0x00000004 after: 0x0000000 > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC > (XEN) > (XEN) ***************************************************** > (XEN) Panic on CPU 0: > (XEN) IO-APIC + timer doesn''t work! Boot with apic_verbosity=debug and > send a report. Then try booting with hte ''noapic'' > option**************************** > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Florian Manschwetus
2011-Dec-21 23:49 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
Sending to devel, maybe a BUG?
Here are the details to the used mobo:
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 1004
Release Date: 03/26/2008
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 8.12
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: M2N-MX
Version: Rev 1.xx
Serial Number: MB-xxxxxxxxxx
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Am 20.12.2011 16:56, schrieb Florian Manschwetus:> Ok, I setup a serial so I can, give you a full copy of output (also
> added some debug options I found)
>
> Booting a command list
>
> Loading Xen 4.1.2 ...
> Loading Linux x86_64-3.1.5-gentoo ...
> Loading initial ramdisk ...
> __ __ _ _ _ ____
> \ \/ /___ _ __ | || | / | |___ \
> \ // _ \ ''_ \ | || |_ | | __) |
> / \ __/ | | | |__ _|| |_ / __/
> /_/\_\___|_| |_| |_|(_)_(_)_____|
>
> (XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0,
> pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011
> (XEN) Latest ChangeSet: unavailable
> (XEN) Console output is synchronous.
> (XEN) Bootloader: GRUB 1.99
> (XEN) Command line: placeholder sync_console console_to_ring
> com1=115200,8n1 console=com1,vga loglvl=all lapic=debug
> apic_verbosity=debug apic=debug
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN) EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN) Found 1 MBR signatures
> (XEN) Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009fc00 (usable)
> (XEN) 000000000009fc00 - 00000000000a0000 (reserved)
> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
> (XEN) 0000000000100000 - 00000000bffc0000 (usable)
> (XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data)
> (XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
> (XEN) 00000000bfff0000 - 00000000c0000000 (reserved)
> (XEN) 00000000fec00000 - 00000000fec01000 (reserved)
> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
> (XEN) 00000000ff780000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 0000000140000000 (usable)
> (XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM)
> (XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97)
> (XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97)
> (XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117)
> (XEN) ACPI: FACS BFFCE000, 0040
> (XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97)
> (XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97)
> (XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97)
> (XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97)
> (XEN) System RAM: 4095MB (4193660kB)
> (XEN) No NUMA configuration found
> (XEN) Faking a node at 0000000000000000-0000000140000000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000ff780
> (XEN) DMI present.
> (XEN) APIC boot state is ''xapic''
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x508
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0]
> (XEN) ACPI: wakeup_vec[bffce00c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:3 APIC version 16
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:3 APIC version 16
> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) ACPI: IRQ14 used by override.
> (XEN) ACPI: IRQ15 used by override.
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> (XEN) PCI: Not using MMCONFIG.
> (XEN) Table is not found!
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
> (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
> (XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2611.867 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) AMD K8 machine check reporting enabled
> (XEN) AMD-Vi: IOMMU not found!
> (XEN) I/O virtualisation disabled
> (XEN) Getting VERSION: 80050010
> (XEN) Getting VERSION: 80050010
> (XEN) Getting ID: 0
> (XEN) Getting LVT0: 700
> (XEN) Getting LVT1: 400
> (XEN) enabled ExtINT on CPU#0
> (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) init IO_APIC IRQs
> (XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
> 2-23 not connected.
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1
> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
> (XEN) ...trying to set up timer as Virtual Wire IRQ... failed.
> (XEN) ...trying to set up timer as ExtINT IRQ... failed :(.
> (XEN)
> (XEN) ****************************************
> (XEN) Panic on CPU 0:
> (XEN) IO-APIC + timer doesn''t work! Boot with apic_verbosity=debug
and
> send a report. Then try booting with the ''noapic''
> option****************************************
> (XEN)
> (XEN) Reboot in five seconds...
>
>
>
> Am 20.12.2011 12:01, schrieb Florian Manschwetus:
>> Adding apic_verbosity=debug gives me that (hope nothing miss-typed as I
>> have no serial console on this box). I found a lot of suggested
>> workarounds:
>> - noapic as suggested in output gives an noapic isn''t support
>> - acpi_skip_timer_override has no effect at all
>>
>> Thx,
>> Florian
>>
>> (XEN) Initing memory sharing.
>> (XEN) AMD-Vi: IOMMU not found!
>> (XEN) I/O virtualisation disabled
>> (XEN) Getting VERSION: 8005010
>> (XEN) Getting VERSION: 8005010
>> (XEN) Getting ID: 0
>> (XEN) Getting LVT0: 700
>> (XEN) Getting LVT1: 400
>> (XEN) enabled ExtINT on CPU#0
>> (XEN) ESR value before enabling vector: 0x00000004 after: 0x0000000
>> (XEN) ENABLING IO-APIC IRQs
>> (XEN) -> Using new ACK method
>> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>> (XEN)
>> (XEN) *****************************************************
>> (XEN) Panic on CPU 0:
>> (XEN) IO-APIC + timer doesn''t work! Boot with
apic_verbosity=debug and
>> send a report. Then try booting with hte ''noapic''
>> option****************************
>>
>>
>>
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@lists.xensource.com
>> http://lists.xensource.com/xen-users
>
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@lists.xensource.com
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Jan Beulich
2011-Dec-22 09:32 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
>>> On 22.12.11 at 00:49, Florian Manschwetus <florianmanschwetus@gmx.de> wrote: > Sending to devel, maybe a BUG?Unlikely, perhaps rather the lack of a necessary command line option ("acpi_skip_timer_override"). If you don''t need this option when booting Linux on that system, you can verify this by looking at whether the native kernel logs a respective message and/or one saying "BIOS IRQ0 pin2 override ignored". Jan
Florian Manschwetus
2011-Dec-22 09:49 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
Am 22.12.2011 10:32, schrieb Jan Beulich:>>>> On 22.12.11 at 00:49, Florian Manschwetus<florianmanschwetus@gmx.de> wrote: >> Sending to devel, maybe a BUG? > > Unlikely, perhaps rather the lack of a necessary command line option > ("acpi_skip_timer_override"). If you don''t need this option when booting > Linux on that system, you can verify this by looking at whether the > native kernel logs a respective message and/or one saying > "BIOS IRQ0 pin2 override ignored". > > Jan > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel >Ok, I think I got the output. But I see nothing really helpful in there. I have attached the boot-log, maybe it gives you the needed information. Thx, Florian _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Jan Beulich
2011-Dec-22 12:28 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
>>> On 22.12.11 at 10:48, Florian Manschwetus <florianmanschwetus@gmx.de> wrote: > Ok, I think I got the output. But I see nothing really helpful in there. > I have attached the boot-log, maybe it gives you the needed information.[ 0.028998] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.029997] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.029997] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.029997] ..... (found apic 0 pin 0) ... [ 0.040381] ....... works. shows that the kernel has no pre-defined workaround (and you''d likely be better of using the same command line option as I recommended for Xen here too). The question why what works on Linux doesn''t work on Xen is not very interesting unless the suggested command line option doesn''t help. Jan
Igor Mammedov
2011-Dec-22 12:54 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
On 12/22/2011 12:49 AM, Florian Manschwetus wrote:>> (XEN) AMD-Vi: IOMMU not found! >> (XEN) I/O virtualisation disabledI''ve seen the same issue on a AMD system with upstream xen and host booted after iommu=off was added to xen''s cmd line.. Although log says that there isn''t iommu, but it worth the shot. -- Thanks, Igor
Florian Manschwetus
2011-Dec-22 13:11 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
Looks acpi_skip_timer_override is not the solution: Loading Xen 4.1.2 ... Loading Linux x86_64-3.1.5-gentoo ... Loading initial ramdisk ... __ __ _ _ _ ____ \ \/ /___ _ __ | || | / | |___ \ \ // _ \ ''_ \ | || |_ | | __) | / \ __/ | | | |__ _|| |_ / __/ /_/\_\___|_| |_| |_|(_)_(_)_____| (XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0, pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Bootloader: GRUB 1.99 (XEN) Command line: placeholder sync_console console_to_ring com1=115200,8n1 console=com1,vga loglvl=all lapic=debug apic_verbosity=debug apic=debug acpi_skip_timer_override (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bffc0000 (usable) (XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data) (XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS) (XEN) 00000000bfff0000 - 00000000c0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fee00000 - 00000000fef00000 (reserved) (XEN) 00000000ff780000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000140000000 (usable) (XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97) (XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97) (XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117) (XEN) ACPI: FACS BFFCE000, 0040 (XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97) (XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97) (XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97) (XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97) (XEN) System RAM: 4095MB (4193660kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000140000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) APIC boot state is ''xapic'' (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x508 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0] (XEN) ACPI: wakeup_vec[bffce00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 16 (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) ACPI: IRQ14 used by override. (XEN) ACPI: IRQ15 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: Not using MMCONFIG. (XEN) Table is not found! (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) (XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2611.923 MHz processor. (XEN) Initing memory sharing. (XEN) AMD K8 machine check reporting enabled (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 80050010 (XEN) Getting VERSION: 80050010 (XEN) Getting ID: 0 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1 (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed. (XEN) ...trying to set up timer as Virtual Wire IRQ... failed. (XEN) ...trying to set up timer as ExtINT IRQ... failed :(. (XEN) (XEN) **************************************** (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn''t work! Boot with apic_verbosity=debug and send a report. Then try booting with the ''noapic'' option**************************************** (XEN) (XEN) Reboot in five seconds... Am 22.12.2011 13:28, schrieb Jan Beulich:>>>> On 22.12.11 at 10:48, Florian Manschwetus<florianmanschwetus@gmx.de> wrote: >> Ok, I think I got the output. But I see nothing really helpful in there. >> I have attached the boot-log, maybe it gives you the needed information. > > [ 0.028998] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 > [ 0.029997] ..MP-BIOS bug: 8254 timer not connected to IO-APIC > [ 0.029997] ...trying to set up timer (IRQ0) through the 8259A ... > [ 0.029997] ..... (found apic 0 pin 0) ... > [ 0.040381] ....... works. > > shows that the kernel has no pre-defined workaround (and you''d > likely be better of using the same command line option as I > recommended for Xen here too). > > The question why what works on Linux doesn''t work on Xen is not > very interesting unless the suggested command line option doesn''t > help. > > Jan > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel >_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Florian Manschwetus
2011-Dec-22 13:16 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
Am 22.12.2011 13:54, schrieb Igor Mammedov:> On 12/22/2011 12:49 AM, Florian Manschwetus wrote: >>> (XEN) AMD-Vi: IOMMU not found! >>> (XEN) I/O virtualisation disabled > > I''ve seen the same issue on a AMD system with upstream xen and > host booted after iommu=off was added to xen''s cmd line.. > Although log says that there isn''t iommu, but it worth the shot. >Same, here doesn''t fix :( Thx, Florian Loading Xen 4.1.2 ... Loading Linux x86_64-3.1.5-gentoo ... Loading initial ramdisk ... __ __ _ _ _ ____ \ \/ /___ _ __ | || | / | |___ \ \ // _ \ ''_ \ | || |_ | | __) | / \ __/ | | | |__ _|| |_ / __/ /_/\_\___|_| |_| |_|(_)_(_)_____| (XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0, pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Bootloader: GRUB 1.99 (XEN) Command line: placeholder sync_console console_to_ring com1=115200,8n1 console=com1,vga loglvl=all lapic=debug apic_verbosity=debug apic=debug iommu=off (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bffc0000 (usable) (XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data) (XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS) (XEN) 00000000bfff0000 - 00000000c0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec01000 (reserved) (XEN) 00000000fee00000 - 00000000fef00000 (reserved) (XEN) 00000000ff780000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000140000000 (usable) (XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97) (XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97) (XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117) (XEN) ACPI: FACS BFFCE000, 0040 (XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97) (XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97) (XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97) (XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97) (XEN) System RAM: 4095MB (4193660kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000140000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) APIC boot state is ''xapic'' (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x508 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0] (XEN) ACPI: wakeup_vec[bffce00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 16 (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) ACPI: IRQ14 used by override. (XEN) ACPI: IRQ15 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: Not using MMCONFIG. (XEN) Table is not found! (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) (XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2611.851 MHz processor. (XEN) Initing memory sharing. (XEN) AMD K8 machine check reporting enabled (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 80050010 (XEN) Getting VERSION: 80050010 (XEN) Getting ID: 0 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1 (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed. (XEN) ...trying to set up timer as Virtual Wire IRQ... failed. (XEN) ...trying to set up timer as ExtINT IRQ... failed :(. (XEN) (XEN) **************************************** (XEN) Panic on CPU 0: (XEN) IO-APIC + timer doesn''t work! Boot with apic_verbosity=debug and send a report. Then try booting with the ''noapic'' option**************************************** (XEN) (XEN) Reboot in five seconds... _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel
Jan Beulich
2011-Dec-22 13:28 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
>>> On 22.12.11 at 14:11, Florian Manschwetus <florianmanschwetus@gmx.de> wrote: > Looks acpi_skip_timer_override is not the solution:That''s unfortunate. Next thing for us to know is whether you have been told any workaround on the native Linux side to make the respective messages disappear (i.e. to consider porting over those bits, if they exist). If there''s no solution known on native Linux, then some debugging will need to be done with that system (a first guess would then be that the system is actually reporting the wrong override (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) meaning to actually specify global_irq as 2, which would be pretty strait forward to hack in for an experiment). Jan> Loading Xen 4.1.2 ... > Loading Linux x86_64-3.1.5-gentoo ... > Loading initial ramdisk ... > __ __ _ _ _ ____ > \ \/ /___ _ __ | || | / | |___ \ > \ // _ \ ''_ \ | || |_ | | __) | > / \ __/ | | | |__ _|| |_ / __/ > /_/\_\___|_| |_| |_|(_)_(_)_____| > > (XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0, > pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011 > (XEN) Latest ChangeSet: unavailable > (XEN) Console output is synchronous. > (XEN) Bootloader: GRUB 1.99 > (XEN) Command line: placeholder sync_console console_to_ring > com1=115200,8n1 console=com1,vga loglvl=all lapic=debug > apic_verbosity=debug apic=debug acpi_skip_timer_override > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds > (XEN) EDID info not retrieved because no DDC retrieval method detected > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009fc00 (usable) > (XEN) 000000000009fc00 - 00000000000a0000 (reserved) > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000bffc0000 (usable) > (XEN) 00000000bffc0000 - 00000000bffce000 (ACPI data) > (XEN) 00000000bffce000 - 00000000bfff0000 (ACPI NVS) > (XEN) 00000000bfff0000 - 00000000c0000000 (reserved) > (XEN) 00000000fec00000 - 00000000fec01000 (reserved) > (XEN) 00000000fee00000 - 00000000fef00000 (reserved) > (XEN) 00000000ff780000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000140000000 (usable) > (XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT 3000826 MSFT 97) > (XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP 3000826 MSFT 97) > (XEN) ACPI: DSDT BFFC05C0, 4E38 (r1 A0557 A0557000 0 INTL 20051117) > (XEN) ACPI: FACS BFFCE000, 0040 > (XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC 3000826 MSFT 97) > (XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG 3000826 MSFT 97) > (XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM 3000826 MSFT 97) > (XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0 3000826 MSFT 97) > (XEN) System RAM: 4095MB (4193660kB) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-0000000140000000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) APIC boot state is ''xapic'' > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x508 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0] > (XEN) ACPI: wakeup_vec[bffce00c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 15:3 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 15:3 APIC version 16 > (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) ACPI: IRQ14 used by override. > (XEN) ACPI: IRQ15 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: Not using MMCONFIG. > (XEN) Table is not found! > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) > (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) > (XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 2611.923 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD K8 machine check reporting enabled > (XEN) AMD-Vi: IOMMU not found! > (XEN) I/O virtualisation disabled > (XEN) Getting VERSION: 80050010 > (XEN) Getting VERSION: 80050010 > (XEN) Getting ID: 0 > (XEN) Getting LVT0: 700 > (XEN) Getting LVT1: 400 > (XEN) enabled ExtINT on CPU#0 > (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000 > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) init IO_APIC IRQs > (XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, > 2-23 not connected. > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1 > (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC > (XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed. > (XEN) ...trying to set up timer as Virtual Wire IRQ... failed. > (XEN) ...trying to set up timer as ExtINT IRQ... failed :(. > (XEN) > (XEN) **************************************** > (XEN) Panic on CPU 0: > (XEN) IO-APIC + timer doesn''t work! Boot with apic_verbosity=debug and > send a report. Then try booting with the ''noapic'' > option**************************************** > (XEN) > (XEN) Reboot in five seconds...
Florian Manschwetus
2011-Dec-22 13:32 UTC
Re: [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2
Am 22.12.2011 14:28, schrieb Jan Beulich:>>>> On 22.12.11 at 14:11, Florian Manschwetus<florianmanschwetus@gmx.de> wrote: >> Looks acpi_skip_timer_override is not the solution: > > That''s unfortunate. Next thing for us to know is whether you have > been told any workaround on the native Linux side to make the > respective messages disappear (i.e. to consider porting over those > bits, if they exist).I not used any workaround to get the linux booting, it is an kde sabayon amd64, where I installed using portage gentoo-sources, xen, xen-tools, openvswitch Then gentoo sources compiled following the sabayon custom kernel howto using genkernel, with a slightly modified default config (read as the config of the original sabayon kernel binary) to support dom0. Thx, Florian> > If there''s no solution known on native Linux, then some debugging > will need to be done with that system (a first guess would then be > that the system is actually reporting the wrong override > > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) > > meaning to actually specify global_irq as 2, which would be pretty > strait forward to hack in for an experiment). > > Jan_______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel