similar to: install debian lenny guest

Hi, I have a RAID 1 (using mdadm) on CentOS Linux and in /proc/mdstat I see this: md7 : active raid1 sda2[0] sdb2[1] 26627648 blocks [2/2] [UU] [-->> it's OK] md1 : active raid1 sdb3[1] sda3[0] 4192896 blocks [2/2] [UU] [-->> it's OK] md2 : active raid1 sda5[0] sdb5[1] 4192832 blocks [2/2] [UU] [-->> it's OK] md3 : active raid1 sdb6[1] sda6[0] 4192832 blocks [2/2]

hi, i''ve tried xen 3.1 on my gentoo lastly but i can''t boot xen because of the message: VFS: cannot open root device "/dev/hda3" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0) i''ve used the tar source from xensource. so the kernel is 2.6.18-xen

I have a self built system using an Intel D 920 processor and a MB that supports VT. I''m able to run HVM domains fine, but have trouble getting multiple VCPUs for these domains. Here is an example of one of my configs. # -*- mode: python; -*- #============================================================================ # Python configuration setup for ''xm create''. #

Hello List If i have a PCI=[08:00.0](example) in any DomU config file the xm shutdown <ID> shuts down this DomU and the Dom0! Otherwise i shutdown this DomU from inside the DomU with halt or shutdown -r now, the Dom0 shuts down to. This happend on Xen 3.4.2 and Xen 4.0 (Kernel 2.6.18.8-xen, 2.6.18.8-xen0) The Operating System to Compile xen was Debian Lenny and the Dom0 os. Without

Hi. I would like to thank Johannes, Piet and others for the lenny-cran AMD64 ports. I have a question about r-recommended from lenny-cran which I just installed: hotelling:~$ apt-cache policy r-recommended r-recommended: Installed: 2.9.0-1~lennycran.0 Candidate: 2.9.0-1~lennycran.0 Version table: 2.9.0-1 0 600 http://debian.lcs.mit.edu unstable/main Packages ***

Hi all, how do you update R on Debian lenny? I have tried to re-install r-base after adding deb http://<favorite-cran-mirror>/bin/linux/debian lenny-cran/ to my backport lists but it keeps installing R 2.7.1. What should I be doing to get the lattest R release? I need it to install a package (plyr) Thanks, David. [[alternative HTML version deleted]]

I''m trying to follow the guide to set up Lenny 5.0 VMs on my newly installed XCP machine. Following what the wiki suggests I downloaded the lenny.xva from http://www.xen.org/files/XenCloud/Software/lenny.xva, saving to domain zero. (note that this file was updated March 1, 2011) When I try to import lenny.xva to my Xen Cloud Platform host using the command: xe vm-import

Hello, I've been asked to test this, can anyone help me? The platform I would like to test on: - Lenny/amd64 - Intel VT-i (Xen HVM support) I've looked over the various threads and wiki pages on the issue and I thought I would try to summarise it more concisely: dom0 (32 bit): - regular install using Lenny CD, Debian Installer, i386 - install the kernel package from etch,

Hello list, I try to install puppet agent on Debian Lenny. I got following error. Seems the repo is broken : ----------------------------------------------------------------------------------------------------------------------------------- node001:~# wget http://apt.puppetlabs.com/puppetlabs-release-lenny.deb --2012-10-12 02:12:12-- http://apt.puppetlabs.com/puppetlabs-release-lenny.deb

On Debian Lenny 5.0.2 with standard distros: Code: debian# cat /etc/apt/sources.list deb http://ftp.us.debian.org/debian lenny main contrib non-free deb http://security.debian.org/ lenny/updates main contrib deb-src http://security.debian.org/ lenny/updates main contrib deb http://volatile.debian.org/debian-volatile lenny/volatile main contrib deb-src http://volatile.debian.org/debian-volatile

Hi. Last week I updated from 32 bit etch to 32 bit lenny on an AMD SMP machine. I first cloned the system disk to an identical drive, and updated the cloned drive. I still have the etch install untouched on the previous drive, which has allowed me to do some testing. After the update R has slowed down significantly. A user brought this to my attention, and at this point we have only

Hi, I am doing some experimentation with xen and Ceph and have a problem booting my guest when my disk = [] uses an alternate block script. Installation from a .iso was ok since the boot device was a file but now trying to boot from the rbd neither the hvmbuilder or pygrub can start as they treat the first value after target= as the /dev node to try and use. My disk parameter looks like: disk =

Hi, I'm running a highschool network with Debian etch and the etch-cran "backports" on top of it. Being bio-informatics, the newest R is essential to us. I did some upgrading experiments; switching to ubuntu is not an option, neither is fetching the sid debs for r. When trying to upgrade from etch to lenny with etch-cran packages installed things block on etch-cran dependencies.

well, I had the site and page and I had added the relevant backport but it didn't work and i keep installing R 2.7 . Don't know why; i probably missed something. #### May be you should add in your mail the file : /etc/apt/sources.list (I suppose there might be a typo, as IT addresses are long and booring, and AFAIK, correcting a typo one made is **very** difficult). FYI binary installs

Hi, I tried to add the Debian Lenny repository for Wine to my apt sources, so I could enjoy a newer release of wine than the 1.0.x version Debian offers. However, when I tried to update repositories, I got a 404, and, upon investigating, realised that there is no Lenny distribution whatsoever on the Wine apt server! (It is, however, mentioned in the documentation for installing Debian/Ubuntu

Hi all, has anyone tried and possibly succeeded in installing "reshape" package on Debian Lenny? I have a permanent failure because i cannot find the "plyr" package. I tried 10 mirrors. I contacted Hadley Wickham and James Long who seemed to have been closed to do it but it didn't work (meaning so far I haven't the answer from them). So has anyone any ideas as how to

Package: xen-hypervisor-4.0-i386 Version: 4.0.1-2 Severity: normal Hi, Take the following config file (standard lenny kernel and initrd, with some customization for iSCSI root): name = "lenny3" kernel = "vmlinuz-2.6.26-2-686-bigmem" ramdisk = "initrd.img-2.6.26-2-686-bigmem" memory = 100 vcpus = 1 vif = [ 'mac=00:16:3e:00:00:17, bridge=br695,

I hope it is relevant to report this here. The debian lenny samba 3.5.3 packages at http://pkg-samba.alioth.debian.org have this problem: Setting up winbind (2:3.5.3~dfsg-1~unoff50+1) ... /var/lib/dpkg/info/winbind.postinst: line 16: pam-auth-update: command not found dpkg: error processing winbind (--configure): subprocess post-installation script returned error exit status 127 Errors were

Hello, I saw the Linux 2.6.18 kernel was removed from Lenny. So there is no dom0 in Lenny anymore. Maybe it would be an idea to leave the 2.6.18 kernel in Lenny to use them as dom0. Only the i386 and amd64 ofcause. Then it would also be possible to add the latest code from xen.org to it. I saw Linux 2.6.27 already has a 64-bit Xen dom0. So the code is ready... Maybe not well enough tested. I

The day after Karolin announced the release of 3.2.0-pre3, the Debian packaging team was able to upload .deb packages for it in Debian *experimental*. To use them, you need to already use Debian testing or unstable, then add this to /etc/apt/sources.list: deb http://ftp.fr.debian.org/debian experimental main contrib non-free (replace "fr" by your favorite mirror country code) If you