similar to: Can''t create a virtual nic

Hi All, I have bfu''ed to net-virt_xb-21_snv_81_021308. The dladm command on my machine does not have create-etherstub option. Please let me know what could be the issue. Thanks Khushal

I just BFU''ed up to B61 and started to play with IP Instances. I''m having trouble making my zone happy: root at aeon zones$ zoneadm -z testing1 boot zoneadm: zone ''testing1'': WARNING: unable to hold network interface ''skge0''.: Invalid argument root at aeon zones$ dladm show-dev nge0 link: up speed: 100Mb duplex: full

Hi the Crossbow team, I am testing my UV fastpath bits and I found several issues that need your suggestion: 1. dladm show-usage won''t work if UV fastpath is enabled. Since the link usage data are collected based on the statistics of the mac_client_impl_t, and UV fastpath skips the GLDv3 processing, that won''t be available. I don''t see a solution for this except

So, just to play with vnics with 106, I have... e1000g2 plumb''d with 192.168.85.10 vnic0 is created on top of e1000g2 with 192.168.85.22 I snoop on e1000g2 to see the traffic. I ping 192.168.85.22 and it works. I stop the snoop on e1000g2. I ping 192.168.85.22 and it doesn''t work. I start the snoop on e1000g2. I ping 192.168.85.22 and ping works. Is this a new feature with

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0

redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #

I decided to take a stab at 6601421 dladm set-linkprop should support multiple -p options along with some related linkprop fixes, but when I looked into dladm.c, was surprised to find that "dladm_parse_props()" is called from do_create_aggr and do_create_vlan in addition to the expected (by me, at least) do_create_vnic *linkprop functions. What happened here? Why do we pass in

Howdy, I just finished reading through the Crossbow presentation: http://blogs.sun.com/sunay/resource/crossbow.pdf And have one question. If you create a virtual NIC with dladm: $ dladm create-vnic -d bge0 -m 0:1:2:3:4:5 -b 10000 1 Can you then add vnic1 directly to the zone? e.g.: zonecfg -z zone1 zonecfg:zone1> create zonecfg:zone1> set zonepath=/zones/zone1 zonecfg:zone1> add net

Following is a short description on assigning priorities to a link (via dladm). Flows will have a similar mechanism (via flowadm). thanks, -venu ---------------------------------------------------------------------------- The components associated with a link or flow, such as Soft Ring Sets, Soft Rings and squeues, have kernel threads processing inbound/outbound packets. The scheduler

Hi, Can you tell why my vnic built on top of an aggregation of 2 NICs of 1 Gbit/s doesn''t report a speed of 2 GBit/s ? [root at nazgul /]# dladm show-dev bge0 link: up speed: 1000Mb duplex: full bge1 link: down speed: 0Mb duplex: unknown bge2 link: down speed: 0Mb duplex: unknown bge3 link: down speed: 0Mb

Hello, I am a rather new user to OpenSolaris and I have been loving every minute of it. I have spent quite a lot of time looking around for bandwidth management features and Project Crossbow is just amazing. It is truly amazing compared to what Linux has to offer. I would like to use flowadm to do some bandwidth management on a tun interface. The problem is that it is not recognized by the dladm

Folks, I''m playing with maxbw on links (as opposed to flows) in Crossbow, and I have a couple of questions. First, the limts seem only advisory. The first example has the main host talking to a zone that has 172.16.17.100 configured on znic0. When there is no maxbw, the throughtput is as expected; when maxbw is 55M the throughput only drops to 76 Mbps: # netperf -H

After googling around and reading the material on the opensolaris.org xvm community site, I still do not understanding the configuration of networking and would appreciate some assistance. Problem: I have successfully installed an hvm domU running Windows XP on opensolaris 2005.11 (build 94), and when the laptop (lenovo t61, core2 9300) is connected via the e1000g0 interface networking works

Hi, >From what I have read, the create-vnic feature in dladm is only available within the context of crossbow...? Specifically, what I am wondering is whether it is at all possible to successfully install crossbow on top of Sun''s "Standard/sunsolve supported" Solaris 10/08 rather than OpenSolaris, per. Se.... Is this at all feasible? Many thanks in advance.. Best

How do I create a vnic that represents the factory assigned MAC address of my physical nic? The bge device in my system (x2100) appears to support 4 MAC addresses. The driver reserves the first as the ''primary/default'' address and allows manipulation of the other three via the MAC_CAPAB_MULTIADDRESS interface. I''d like to use vnics on this system, as I have Xen guest

Crossbow team, The following is of interest to the Crossbow project. Since a large chunk of these changes also exist in the Crossbow gate, the delivery of this wad will result in fewer lines of changes for Crossbow''s delivery. If someone on Crossbow could participate in this review, that would be a bonus (Eric Cheng made original changes in the Crossbow gate at some point last year).

Hi, I''m trying to BFU my own build of ON onto a snv_104 installation and I''m hitting problems with bnx driver; which is coming from a set of snv_105 closed bins: WARNING: bnx0: Failed to allocate GLD MAC memory. I believe bnx is a closed source GLDv3 driver. Were there any incompatible changes due to the crossbow integration that went in after snv_105?

Hi Folks, I have a snv_105 sxce host that I just can''t get to work as expected with crossbow + zones. My test host persephone, is a virtual machine running under VMware ESXi 3.5, with 2 virtual network cards (e1000), all on the same flat network/subnet. It started life just 2 days ago with a clean install of snv_95, and I LUed to 105 yesterday. To rule out any sharing issue, the first

Hi all, Link protection is a new feature we are planning to introduce to Solaris and we would like to solicit your feedback on it. Please see attached document for details.

1 simple question about network statistics for vnics: We noticed that the statistics for vnics (used by Virtualbox guests) are not there. When the nics are plumped in the host OS, we do see them showing up, but all all records are 0. Can someone tell me how to get the correct network info via snmp on the Vbox Host?? Thanks in advance. IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING: