similar to: Running Kernel 2.4.20 Under RH8.0

Hi, on a system RedHat 8.0, only on this, not on other various RedHat8.0, I have see the follow strange error in /var/log/{messages,boot.log} ..... After the boot all it seems to work, the modules is loads.... I have already tried to install other versions of kernel but the problem is always the same one :-(( Someone has some idea of what is happening? Thanks... Dario Lesca

Hi all, I got a USB-HDD, but it doesn't looked like connect and cannot mount it just after PC boot. But insert and remove a usb cable from PC, it connect (with hotplug?) Is there any good how-to's for getting a usb-HDD to auto connect when It is booted the computer? lsmod is following: [lsmod of just after boot] Module Size Used by Not tainted parport_pc

zaprtc 'load' is failing on my machine (the make was fine, same output as other posts to this list) [xxx@xxx zaptelrtc]# make load sync modprobe zaptel insmod ./zaprtc.o ./zaprtc.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or

(i sent the same message from another email acount, that isn''t memberlist. sorry) Hi Everyone..!! i''m beginner in tc with htb, i''m use to limit public, and nat ip clients, i''m to add to one of my server and get this error: > tc qdisc add dev eth0 root handle 1: htb default 10 Unknown qdisc "htb", hence option "default" is unparsable

Hi all I ahve been having problems loading the wcfss and wcfxo drivers I get an error message invalid argument and something about post install insmod failed the currently load modules do show the drivers loaded but asteris won't start lsmod root@slackware:~# lsmod Module Size Used by Not tainted soundcore 3332 0 (autoclean) wcfxo

Hi, First, here is my config: Kernel version 2.4.25 on a Fedora distro, Asterisk and a Fritz! Isdn PCI Card (v2). I try to make the CAPI drivers deal with Asterisk but I can't try to figure out to get of this issue. As I see, Fritz modules are integrated with the kernel, so I directly loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by downloading archives of the

hi guys... im a new asterisk user. i dont understand why asterisk doesnt start. pls take a look at the output below. i could start it a couple of times .. #asterisk -gc Asterisk CVS-v1-0-01/21/05-14:58:31, Copyright (C) 1999-2004 Digium. Written by Mark Spencer <markster@digium.com> ========================================================================= [ Booting....................Jan

Hi I have been searching the wiki and mailing lists and I cant see where my config is incorrect. I have a Digium tdm11b (1 fxo + 1 fxs) this is the output of cat /etc/zaptel.conf # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: WCTDM/0

We've been noticing some problems with ext3 and, in our case, postfix, that appear to come to light under heavy disk i/o loading. A previous thread found here (http://www.redhat.com/mailing-lists/ext3-users/msg04189.html) documents an identical set of symptons (and similar setup), but with RH 7.2 The specifics are this: 1. Stock install of RH8.0 with postfix. 2. Linux mx 2.4.18-14 #1

Any thoughts on the following? I am running asterisk from CVS (downloaded yesterday's version, just to be sure) on a test system with no digium cards in it, so I have installed ztdummy (see logs and screenshots below) as a timing source. When I call the music on hold extension from a Sipura Sip connected analog phone, I hear nothing and start getting Warning[98310]: chan_sip.c:674

Hi, Hi, I have been googling, and can't find anything that will help me: mt -f /dev/st0 status /dev/st0: No such device or address Any suggestion? I am using CentOS 3 [RHEL ES3 without the licenses] The tape drive is recognized at boot [from dmesg] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892:

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here

Hi, I'm running redhat 9 (kernel 2.4.20-8) as a heavy file server using ext3 file system. The server hang once a week and I found the following my log in /var/log/messages It looks like some ext3 quota problem. Anyone has similar experience ? Any suggestion ? Unable to handle kernel paging request at virtual address ffffffff printing eip: ffffffff *pde = 00001067 *pte = 00000000

Hi all, This just got me out of bed at 5am. Although there are a lot of Oops reports on the list I didn't find any for my kernel version or with a similar stack trace. I'm wondering if this is a known issue? Kernel: 2.4.20-8 (Redhat 9.0 default kernel). There's 2GB of RAM, I'm using barely 1/4 of it. I'm fairly confident RAM is okay (memchecked on install). Disk is supposed

Hi everyone, I am running asterisk on red hat linux 9 box. The sound card is Intel 82801db AC' 97 audio and the module is i810_audio. It runs well with other applications like xmms and the standard tests deliver a sound . I have also tried to record voice and that works well too. 1-)Now when i run asterisk and i dial out an extension to play any sound there is none. The same thing

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

Hi, One of my pbx's seems to be having some new issues. crackling interference on the zap channels running through the channel bank, and I noticed that these happen when I hit an "irq miss" in zttool: Current Alarms: No alarms. Sync Source: Digium Wildcard T100P T1/PRI C IRQ Misses: 82695 Bipolar Viol: 0 Tx/Rx Levels: 0/8 3 Total/Conf/Act:

I have two networked pcs. pc 1- RH8.0 which came with Samba-backend 1.0.8 and Samba 2.2.5 pc 2- XP Home I am able to access the shared folders from pc2 on pc1. However from pc2 I can not even see the ressources of pc1. In My Network Places/Entire Network/Microsoft Windows Network/"My Workgroup" I can see "pc1" but when I click on it I get an error message: \\"pc1"

Been having this problem, and posted about it before. Thinking it was a memory issue, I've replaced all memory on the server. However, the problem has continued. Server is a Proliant DL380 (8GB RAM, 2 Xeon CPU), running CentOS 3.6, all patches up-to-date. Kernel is 2.4.21-40.ELsmp (problem seems to have first manifested on kernel 2.4.21-37.0.1.ELsmp). Disk is CCISS hardware RAID-5,

Howdy. We've got a couple IBM x440 (Summit) 8-way Xeon systems that I've been trying to get netbooting for a while. Since we use Kickstart and SystemImager to load OSes on our systems, a system has to be able to netboot before it can be made available to folks for project use. System BIOS is the current one, v1.08. They're booting from a planar BroadCom Tigon3 adapter. BIOS