similar to: HAVP 0.85 on CENTOS

Hi, I want to use Havp Version 0.86 with SQUID on CENTOS 4.4 and 5. But, no Havp 0.86 RPM still can not be found. I want to build Havp 0.86 RPM and SRPM by using the tarball. So, I got havp.spec file written for Havp 0.82 and changed its version to Version: 0.86 . Then, I did below command. [root at worldnet SPECS]# rpmbuild -ta havp.spec error: Name field must be present in package: (main

Hi, I want to setup viaralator with squid and clamav. I have never set it up . Is anybody out there who has set ip up on CentOS 4.4. If so, Pls guide me with nessasary info. -- Thank you Indunil Jayasooriya -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070205/91830e8d/attachment.html>

Hi , I am ruuning Senmail with MailScanner on CentOS 4.4. It has updated to kernel 2.6.9-42.0.8.EL from its past kernel 2.6.9-42.0.3.EL. Now the Server can not boot up and gives the below error. mkrootdev: label / not found Mounting root filesystem mount: error 2 mouting ext3 switchroot: mount failed: 22 Kernel panic - not syncing: Attempted to kill init! But I can boot up from its

look for clamav-devel-* or clamav-dev-* packages of your distribution. Paul Matthews (paul.matthews@cathedral.qld.edu.au) schrieb: > > I have installed the following when it comes to clamAV > > clamav-db-0.87-1.1.fc3.rf.i386.rpm > clamav-0.87-1.1.fc3.rf.i386.rpm > clamd-0.87-1.1.fc3.rf.i386.rpm > > am I missing something if so could you please direct me to the website?

Hi, I want to block Yahoo Messenger, MSN messanger and Kazza with IPTABLES as my local network users always go there. How Can I do it? I am not runnig iptables as a script nor have I put anything in my rc.local. But instaed, I input the commands and save it by using the below cmmand /etc/init.d/iptables save and I restart it /etc/init.d/iptables restart My box runs on Cent OS 4.4. Help

Hi, I tried to mount an audio cdrom to listen to its music. But It gives the below error. why is that ? -- [root at worldnet ~]# mount /dev/hdc /media/cdrom/ /dev/hdc: Input/output error mount: block device /dev/hdc is write-protected, mounting read-only /dev/hdc: Input/output error mount: /dev/hdc: can't read superblock [root at worldnet ~]# Thank you Indunil Jayasooriya -- Thank

Hi all, I installed cups and samba on redhat 9. Printer has been attached to the linux box . We can print from the linux box. We can print from windows clients too. But My problem is that when we print from windows, printer starts printing. But I want to set them in the queue instead. Then I want to go to cups web interface and release jobs. How can I do it? This is urgent. Pls let me know as

Hi all, I would like to know has RedHat EL 5 been already released or is it still under beta version? When will CENT OS 5 be available to the world? -- Thank you Indunil Jayasooriya -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070330/001cc6a7/attachment.html>

Hi all, I am lookng for a truble ticket to install on my Cents os 4.4 server. RPM is always prefferd. Souce is also welcome. Have you done somethink like this before? What are the packages that you recomend for me. -- Thank you Indunil Jayasooriya -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have an DNAT ISSUE with PREROUTING. This is my setup. I have 2 firewalls running iptables. Pls asume 1.2.3.4/29 is the internet interace of FIRST firewall. 2.3.4.5/29 is the internet interface of SECOND firewall. it has DMZ zone. in that DMZ zone, mail server runnig @ 192.168.100.3 Now I want to DNAT port 25 of FISRT firewall ( i.e - its ip address - 1.2.3.4/29) to the internet ip

Hi, I am trying to install OTRS on centos 4.4. I keep getting Warning: Kernel/Config.pm isn't writable! when i try to run the installer. I have done chmod 777 on the Config.pm file etc but still it will not work. I also did "chown Config.pm apache" and that did not work either. Please can someone help me. This looks like a simple issue which i cannot able to solve. below is

Hi, I have file at /opt/mailbackup/mailbackup.tar.gz (this is a Linux Machine) I want to put this file to a windows pc. What is the command to do it. can I use something like the following. mount -t smbfs Then How to use this ? -- Thank you Indunil Jayasooriya

Hi, I want to setup vsftp on centos 4.5. 2 types of ftp. they are active and pasive. What is the default type ftp type o CentOS ? Is is PASIVE ftp? in /etc/vsftpd/vsftpd.conf, I found below line. What should I do for below line? # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES Should I COMMENT it out? I need a very secure ftp service. YOUR

Hi All, I am looking for an open source email client package that is equivalent to MS OUTLOOK. Clients are running Windows XP and Vista and Linux. So the package should be able to run on both Windows And Linux. Mail server is running Ms Exchange. So this client pkg should be able to access Global Address book of the MS Exchange Server just as MS OUTLOOK. What about evolution ? Pls see, below

Hi, I want to install dcc on CentOS 4.4 as I am ruunig Dual-Sendmail with amavisd-new. I am looking for DCC RPM pkg. I searchrd bit I could not find any RPM pkg. Pls help me to find DCC RPM pkg. Have you installed DCC on CentOS 4.4. then Pls guide me. -- Thank you Indunil Jayasooriya -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi iproute2, I have a network to reach which is 192.168.2.0/24. It is a branch of the company. I have currently added a route to that network via one gateway ( 192.168.0.254) in following way. ip route add 192.168.2.0/24 via 192.168.0.254 Now, We got another gateway which is 192.168.0.250. Now I want to add a route to the same network which is 192.168.2.0/24 via this gateway ( 192.168.0.250)

Hi, I have a box running with iptables and iproute2. it has 3 ethernet cards. One for the internet. another for LAN and yet another for DMZ. @ DMZ ZONE I have 3 web servers. But I have only one real ip on my firewall. Now , I want to forward port 80 to theese 3 web servers. How can I do it? I searched a lot from google. But, still no luck. -- Thank you Indunil Jayasooriya

Hi All, I am running iptables on centos 4.5 and 5 boxes. Now , I have requirements to enable below features. Gateway level antivirus, anti spyware and intrusion preventions, content filtering, etc. I googled a bit. But, Still no luck to find proper Docs to enable these. Can Iptables meet these features? If possible, Pls let me know some documentations that say How to set up these. Hope to

Hi all, I want to run vsftp behind a firewall.(i.e DMZ zone) . It is runnig as passive ftp. the theroy behind passive ftp is , - FTP server''s port 21 from anywhere (Client initiates connection) - FTP server''s port 21 to ports > 1024 (Server responds to client''s control port) - FTP server''s ports > 1024 from anywhere (Client initiates data

Maybe this don't to be the best form to solve your problem, but worked,rs. #!/bin/bash #power by Diego Rodrigues totalFileOne=$(wc -l file1 | cut -d" " -f1) totalFileTwo=$(wc -l file2 | cut -d" " -f1) count=0 if [ ! "${totalFileOne}" -eq "${totalFileTwo}" ];then echo "The two files need of same number of lines" exit 1 fi for