similar to: Kvm intel dual gigabit ethernet nic pass thru.

Hello I am thinking of buying this card to and wanted to know if this NIC is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the card plays with centos and also proxmox ve (if any of you use that distro ) If things don't seem to work I may bite the bullet and buy an Intel card thanks Rafeal Stewart

On Fri, Jan 2, 2015 at 1:35 AM, Rafeal Stewart <mechy2k2000 at gmail.com> wrote: > On Thu, 2015-01-01 at 22:01 -0800, John R Pierce wrote: > > On 1/1/2015 9:41 PM, mechy2k2000 wrote: > > > Hello I am thinking of buying this card to and wanted to know if this > NIC > > > is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit > > >

On Thu, 2015-01-01 at 22:01 -0800, John R Pierce wrote: > On 1/1/2015 9:41 PM, mechy2k2000 wrote: > > Hello I am thinking of buying this card to and wanted to know if this NIC > > is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit > > Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the > > card plays with centos and also

On 1/1/2015 9:41 PM, mechy2k2000 wrote: > Hello I am thinking of buying this card to and wanted to know if this NIC > is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit > Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the > card plays with centos and also proxmox ve (if any of you use that distro ) I've not tried that card on anything

Hello CentOS Community, So I bought a NIC (using the Intel 82579V chipset) that supports Dual RX and TX queues , my goal with that is so iam able to see and use two IRQs in /proc/interrupts and hence be able to take advantage of 2 cores on my CPU. Instead I only see one IRQ being used, and hence only one CPU core.. Please see below. Advisement is appreciated! Alex

> > Attempting to install CentOS on a new MSI MB (MS 9618), which > uses the subject controllers. > There are two controllers on the board, seems as though only > one can be used. > I have to manually init, using ifconfig eth0, to use it. > > I understand that the Ethernet controller drivers are not available. > Is there any news on this or a possible date when

Hi list, Im having a problem with intel 82573L Gigabit Ethernet Controller. Centos 4.2 can't detect this internal ethernet port my motherboard is an Intel Desktop Board D945PSN. when i type lspci the ethernet is identified but when i type dmesg i can't see the ethernet port. -- Regards, Mark Quitoriano, CCNA Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

I encountered a problem with dom0 when rebooting and running an intel gigabit card using the pro/1000 driver. When the system tries to shut down I get the following output of an strace command : ......... 17:10:49.063616 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 3 <0.000029> 17:10:49.063689 ioctl(3, 0x8913, 0xbffffc80) = 0 <0.000018> 17:10:49.063751 ioctl(3, 0x8914, 0xbffffc80) =

On 01/25/2014 06:54 PM, Ivan Kabaivanov wrote: > Hi all > > I have a very weird case of pci passthrough. > > I have a machine with 7 network interfaces, all of them intel. Four of them are on one quad giga ethernet device. If I manually unbind the devices and allow qemu to use them, with intel IOMMU working, everything works like a charm. Here's how I do it manually: >

Hi all I have a very weird case of pci passthrough. I have a machine with 7 network interfaces, all of them intel. Four of them are on one quad giga ethernet device. If I manually unbind the devices and allow qemu to use them, with intel IOMMU working, everything works like a charm. Here's how I do it manually: root@kybrat (x86_64) ~]$ lspci -nn | grep net 00:19.0 Ethernet controller

Is anyone aware of any Dual or Quad port Intel NICs which work out of the box in CentOS 5.2? we need bonding to work. Thanks, -Drew -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080820/f31976c7/attachment-0005.html>

Hi, I am looking for dual or quad fast ethernet NICs that work with CentOS. There is no need for high performance so regular fast/pci is ok. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20101228/1f5e2944/attachment-0001.html>

Hello all, I want to learn about requirements if I want to protect gigabit network with ipfilter as transparent firewall. Which type of hardware is required to install FreeBSD + ipf (as transparancy ) . We use 3 gigabit ethernet to protection which type of gigabit ethernet carts are powerfull. Also, what about the NMBCLUSTERS , IPSTATE_SIZE and IPSTATE_MAX in ip_state.h. I want to collect all

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

Hi all, I am notice strange behaviour of samba in our mixed fastEthernet/gigabitEthernet enviroment. First of all let me to describe our situation. We have a samba server running debian unstable with 2.6.3 kernel installed. Server has a gigabit copper connection (tg3 driver) to the 100/1000 Megabit switch (3COM 4228G). Client is a WinXP/Linux workstation connected by ordinary 100 Megabit

Hello Xen users, I want to purchase some gigabit ethernet cards. Our local Fry''s is having a $5.99 special on Airlink gigabit PCI cards with the Realtek chipset. Any experiences with this chipset vis-a-vis xen that would preclude its use? Thanks for your advice, Mike Wright :m) _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hello everyone. What's better for Asterisk: have 2 distinct 100Mb network cards in the system, one on the "internet" and one on the "local net" OR have one 1000Mb network card with 2 separate VLAN's set up? It's a difficult decision because 2 cards are using 2 IRQ's etc but a single 1000Mb card might generate more PCI interrupts and get me into different

Do anyone have any experience using 10 Gigabit Ethernet connections with Samba? Specifically, if you have had such an experience, can you share what sorts of optimizations you made to get the maximum data transfer between server and workstation? I am just experimenting with this kind of setup myself and I see a huge GULF between the raw TCP/IP transfers that I can make between two

Dear Xen Users, I have a rhel5 dom0 machine with four nics, two public and two private. My goal is to run two xen instances, a fully virtualized rhel4(with a custom kernel, hence the fully virtualized) and a paravirtualized rhel5. Each instance will need one public and one private nic with gigabit connectivity. At the moment I''m simply bridging two nics to each instance. Is this the

Hi Folks, Is there any SIP FXS ATA with Gigabit ethernet bridge port, in the market ? -- Isamar Maia Cel. VIVO SSA: (55) 71-9940-2012 Cel. TIM SSA: (55) 71-9289-5128 Cel. Claro SSA: (55) 71-9146-8575 Fixo: (55) 71-4062-8688 Skype ID: isamar.maia "A vida ? muito curta para ser pequena" (Benjamin Disraeli) -------------- next part -------------- An HTML attachment was