similar to: TrippLite AVR550U start on power

[please use reply-all to include the list] On May 20, 2019, at 5:30 PM, Steven Bixby wrote: > > I have a TrippLite AVR550U that my company uses several individual Linux boxes in one large system, all running Ubuntu 18.04LTS, and all will be using the package version of nut - 2.7.4. In my scenario, our usage case is for the PCs to all shut down, followed by the individual UPSes, when

Hi Raphael, btw, are you 2 bugs today a simple coincidence with my linkedIn invitation yesterday? ;-) 2008/10/4 Raphael Geissert <atomo64 at gmail.com>: > Package: nut > Version: 2.2.2-8 > Severity: wishlist > Tags: patch > > Attached is a patch adding "support" for tripplite's avr750u UPS. > Issues: > * productid still needs to be specified in

Hi Everyone, I recently bought a Tripp-Lite SMART1500LCD for my Linux Mint 19.3 machine, connected via a USB cable. I installed Nut 2.7.4 from the Mint package repository via sudo apt update && sudo apt install nut. Everything works great: NUT issues low battery warning when it reaches the set low battery point and then issues shutdown commands...computer shuts down..then the UPS shuts

Hi Patrick, in February, you tried to post the below message to the nut-upsuser list, but the post was rejected because you were not subscribed to the list. Unfortunately, you did not subscribe and re-post it. Anyway, I have been working on Tripp-Lite support for newhidups recently, and I wonder if you have any feedback. Did you ever get this device to work? >From the information you sent,

Hello Nut Devs, I'm working with usbhid-ups and a Tripplite OMNI1000LCD. I used a USB packet sniffer to discover something cool about the watchdog feature in this unit. (not sure if the other OMNI-X-LCD models work the same or not.) Basically there's a single HID variable at Report ID 0x52 (UPS.OutletSystem.Outlet.ffff0092) that's one byte (0-255 int) and it contains the Watchdog

Can anyone help getting a Tripplite SU2200XL to work with nut 2.0.3 using the supplied serial cable? Starting the ups service yields: Starting tripplitesu: Network UPS Tools - Tripp Lite SmartOnline driver 0.02 (2.0.3) Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 I also have Tripplite's PowerAlert 12 software installed and when run it finds the UPS without a problem. So

Hi Patrick, Patrick Nolan wrote: > > Remember me? Back in May we exchanged some messages about my Tripp-Lite > UPS. My boss has gone on vacation, so I finally got a chance to take a > look at this. > > Peter Selinger wrote: > ... > > In case you feel like experimenting with this, I am attaching a patch > > that *might* enable this device to be supported by the

Hello, I am having difficulty using NUT to shut down my Netgate SG-1100 (a pfSense router) when the power level of the UPS gets critically low. Here is some relevant information: - OS: pfSense 2.4.5-RELEASE-p1 (FreeBSD 11.3-STABLE) - NUT version: 2.7.4 - Installed from: pfSense package 2.7.4_7 - UPS: AVR750U (Device release number 2) - I have included my config files, output from `upsc`, and

On Thu, 8 Jun 2017, Robbie van der Walle wrote: > After the first test and the NAS is restarted I had to change the > setting battery.charge.low again to 80? Does the NAS DSM reset battery.charge.low to 10 or is it internal to the UPS? You will have to experiment by disconnecting the UPS control lead from the NAS and connecting it (if possible) to the Mac. After setting to 80 and a

I'm having trouble with a TrippLite SU3000XLCD. I'm using a Raspberry Pi running Raspbian (wheezy) with NUT 2.6.4. I can monitor my older TrippLite UPSs, mostly SU1000RT2Us, with this Pi and a USB to serial adapter. My first thought with the SU3000XLCD was to use the USB port instead of the serial port as that's the "modern" thing to do. When I plugged the USB cable in

Hi! Some systems I have take some time to shut down, so I would like them to shut down if the UPS have been on battery for 2 minutes. Internet has told me that SHUTDOWNCMD ?/sbin/shutdown -h +0? in /etc/nut/upsmon.conf will execute when the UPS is both OB (on battery) and LB (Low battery). Like in wiki.ipfire.org - Detailed NUT Configuration<https://wiki.ipfire.org/addons/nut/detailed>

I am using NUT 2.0.2 on SuSE Linux 9.2 which is attached to a Tripplite SmartPro Net 2200 UPS. I have Nut using the included tripplite driver, and it is communicating with the UPS correctly. The battery voltage of theTripplite reported by the NUT server is 13.5VDC. If I attach the UPS to a Windows 2000 server running Tripplite's PowerAlert software, the battery voltage is being reported as

On Feb 9, 2015, at 6:48 AM, PERE (yahoo.es) <pererivers at yahoo.es> wrote: > 0.028188 Can't set USB configuration: could not set config 1: Device or resource busy > 0.029246 detached kernel driver from USB device... > 0.030559 USB device [0001:0000] opened > 0.866216 read: (8 bytes) => 03 00 00 00 00 00 00 00 > 0.866413 reply[0] = 0x03

On Tue, 4 Apr 2017, Arnaud Quette wrote: > Hi Jon, Stuart and the list > > 2017-04-04 1:09 GMT+02:00 Stuart Gathman <stuart at gathman.org>: > Which NOTIFYCMD is run when there is an ALARM? > Have you specified that in your upsmon.conf? > > And that is the question of the hour.? How do you specify that?? Note > that this is not the REPLBATT

If there is a next Windows release, perhaps the default NOTIFYFLAG's should be adjusted? NOTIFYFLAG ONLINE SYSLOG NOTIFYFLAG ONBATT SYSLOG NOTIFYFLAG LOWBATT SYSLOG NOTIFYFLAG FSD SYSLOG NOTIFYFLAG COMMOK SYSLOG NOTIFYFLAG COMMBAD SYSLOG NOTIFYFLAG SHUTDOWN SYSLOG NOTIFYFLAG REPLBATT SYSLOG NOTIFYFLAG NOCOMM SYSLOG NOTIFYFLAG NOPARENT SYSLOG The 'wall'

I am trying to get a TrippLite SU1500RTXL2Ua working with nut on Mandriva 2007.1, is there a particular version of nut needed to get this to work? At first I tried nut 2.0.5 (which came with 2007.1) but it wouldn't work, and then research showed it was an older version of nut. So nut-2.2.1-2 src rpm was pulled from Mandriva 2008.1, the binary rpm built, and nut and nut-server installed from

Ah! So I can detect the source UPS in the upssched.conf and pass it as a distinct event to the shell script. That sounds like an excellent approach. Thanks! GMH From: O'Shaughnessy, Mike [mailto:Mike.OShaughnessy at gd-ms.com] Sent: Tuesday, October 31, 2017 12:46 PM To: Garrett Michael Hayes <Garrett at VerbalImaging.com>; nut-upsuser at lists.alioth.debian.org Subject: RE: Email

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

On Jan 21, 2014, at 3:16 AM, Rafa? Oleszek wrote: > I would like to mention that MINSUPPLIES manipulation doesn't work. My nut version is : 2.2.2-4 (RHEL 5) What do your configuration files look like? Setting MINSUPPLIES to 2 should work. You can run upsmon with a debug level of 3 or greater, and it will print the current and minimum "power value", which is what determines