similar to: connection pb with blazer_usb with infusec UPS

Please keep the list CC'd, thanks. 2016-10-07 8:54 GMT+02:00 MATHIEU Clement <clement.mathieu at gmail.com>: > Hello > thanks for your answer > i?ve tried with nutdrv_qx driver > and i got this result > > lsusb : > > Bus 001 Device 058: ID 0665:5161 Cypress Semiconductor USB to Serial > Bus 001 Device 005: ID 13ee:0001 MosArt > Bus 001 Device 004: ID

Hi Charles, I am done with few things: I made the cable - looks good, because I see some activities. I upgraded NUT to 2.7.3. but I have no success to start driver(this are the outputs) nut.cfg MODE = netserver ups.conf [infosec] driver = nutdrv_qx (or blazer_ser) port = /dev/ttyS1 desc = "XP Pro 2500 RM" output(nutdrv_qx cmd upsdrvctl -DDD start) Network UPS

Thank you for your reply Charles, this is the "upsc" result: root at artu:~# upsc ups at localhost Init SSL without certificate database Error: Unknown UPS Trying with nutdrv_qx, protocol megatec the driver does not start... 2017-06-08 14:47 GMT+02:00 Charles Lepple <clepple at gmail.com>: > On Jun 7, 2017, at 12:54 AM, Andrea de Lutti <adelutti at gmail.com> wrote:

No progress has been made: cable is UPS - PC 6 - 3 7 - 5 9 - 2 for ./blazer_ser -DDDDD -a infosec 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyS1" 0.000323 debug level is '5' 0.103068 send_to_all: SETINFO device.type "ups" 0.103104 send_to_all: SETINFO driver.version "2.7.3" 0.103118 send_to_all: SETINFO

System: Cenots Linux 6.9 Application: nut-2.7.5-0.20170613gitb1314c6 [with usb 0.1 from distro] Device: Mustek PowerMust 1060 LCD Comunication log file: dump.txt We are looking at the possibility of successful communicating with this device UPS Mustek PowerMust 1060 LCD. PS: wolfy on the list gives me assistance and i can install any new compiled nut version from sources. Thanks, Catalin.

Hello. I recently upgraded from Ubuntu Maverick to Natty and hence upgraded nut from 2.4.3-1ubuntu5 to 2.6.0-1ubuntu3. My Sven PowerPro+ 1000 UPS ( http://en.sven.ru/catalog/ups/power_pro_plus_1000.htm ) worked fine with the previous version, using megatec_usb driver, but doesn't work with the current version, since megatec_usb is no longer available. Here is the output from blazer_usb.

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Hello All, I tested our new UPS yesterday. I noticed that while the blazer_ups drivers support this device, the newer nutdrv_qx does not. I suppose that this should not be the case, as nutdrv_qx will replace blazer_ups(?). Versions: I installed Nut on Ubuntu 13.10 (64 bit) from the standard package (2.6.4-2.3ubuntu2), and I also installed from the source tarball (2.7.1), into a different

Hello all, I am trying to set up my brother's UPS (remotely over internet) on an OpenIndiana-based storage box. According to him, the UPS is probably an Ippon Back Power Pro 600 dated around 2003 (battery recently replaced), and it has an USB connection. Sorry for a relatively long post with a log of my successes and failures, in the hopes that someone would point out what I did wrong.

Hi All, i'm running blazer_usb on my home orvaldi ups and i'm observing in dmesg one, two or three segafults of blazer_usb per day and notifications about broken/re-established communication like this: blazer_usb[2985]: Communications with UPS lost: status read failed! blazer_usb[2985]: Communications with UPS re-established today i've started ups service again with attached (c)gdb

Use the name from ups.conf in front of "@localhost". ?The re?sult is quite different ;) root at artu:~# upsc Elit at artu Init SSL without certificate database Error: Driver not connected > What if you try nutdrv_qx without specifying megatec? (It should > autodetect.) > ?Here is the result: ? root at artu:~# upsdrvctl start Network UPS Tools - UPS driver controller

On Jan 2, 2015, at 4:27 PM, Mike Raath <raathm at gmail.com> wrote: > Maybe usbpassthrough is something I should look at? I'll do some reading. You may have found this already, but this (plus the followup KB item #1021345) seems to imply that you can bind the USB-to-serial adapter to the NUT VM:

On 11/9/2013 5:24 AM, Jim Klimov wrote: > Hello all, > > I am trying to set up my brother's UPS (remotely over internet) > on an OpenIndiana-based storage box. According to him, the UPS is > probably an Ippon Back Power Pro 600 dated around 2003 (battery > recently replaced), and it has an USB connection. > > Sorry for a relatively long post with a log of my successes

Hi, i've got similar problem with an OVISLINK 1000VA UPS on Debian. I've tried to connect with it using different drivers and this is what I get with each of them: [UPS] driver = blazer_usb vendorid = 0001 productid = 0000 port = auto subdriver = phoenix sweethome:~# /lib/nut/blazer_usb -a UPS -u root -DDD Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000

On 10/30/2017 03:19 PM, Alexa Catalin wrote: > System: Cenots Linux 6.9 > Application: nut-2.7.5-0.20170613gitb1314c6? [with usb 0.1 from distro] > Device:??Mustek PowerMust 1060 LCD > Comunication log file: dump.txt > > We are looking at the possibility of successful communicating with > this device UPS?Mustek PowerMust 1060 LCD. > > PS: wolfy on the list gives me

mmh.. I looked quickly at the logs: - from time to time some character is swapped with something other (just like in the 'F' reply of your previous logs), but this shouldn't be a big problem; - then, suddenly, the queries timeout (just like when you relaunch the driver after a stale) - this is the problem. We need to make sure this isn't something vm-related (if so, having almost

Hi I have the RCT 3KVA Axpert solar hybrid inverter. It is also known as the MPP Solar PIP-MS series, the IPS-4000WM and the Voltronic Axpert MKS. I am trying to monitor the inverter using NUT on a Raspberry Pi (I have tried Ubuntu as well with the same results). I have tried most of the drivers with no success. The inverter came with the ViewPower software so I assumed that my best chance

Hello! I can't get my UPS to get detected. I have tried to search the internet for several hours. I have a Mustek Powermust 1400 USB that has both a USB and serial port. OS: openSUSE 20151209 (x86_64) VERSION = 20151209 CODENAME = Tumbleweed Kernel: 4.2.1-1-desktop Nut: nut-2.7.3-1.5.x86_64 installed with zypper dmesg |grep usb [94414.680765] usb 1-1.1: new low-speed USB device number 4

Hello guys, Please help me to resolve the issue. I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup NUT 2.6.0 to work with it. blazer_ups driver doesn't recognize the UPS :( The Manufacturer provides 'PowerD' software for linux with installation instractions on a CD (see example below). --------===------- Welcom to PowerManager System!

Hi all, can anybody sugggest a proper solution to the problem described here: http://nut-upsuser.alioth.debian.narkive.com/wIMnftV0/installing-nut-for- powerwalker-vi-1500-lcd Righet now I am trying to make it go and running on version: root at raspberrypi:/home/pi/deb# apt-cache policy nut nut: Installed: 2.7.2-4 Candidate: 2.7.2-4 Version table: *** 2.7.2-4 0 500