Hello guys,
Please help me to resolve the issue.
I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup
NUT 2.6.0 to work with it.
blazer_ups driver doesn't recognize the UPS :(
The Manufacturer provides 'PowerD' software for linux with
installation instractions on a CD (see example below).
--------===------- Welcom to PowerManager System! -----===-----
Copyright(C) 2001 Richcomm Technologies, Inc. 2001.10 .
+-+==================+The Current Time Settings +===========================+-+
System Shutdown Delay Time When AC Power Failed: [250] Sec.
System Shutdown Delay Time When Battery Low: [25] Sec.
Turn off UPS after System Shutdown: YES
+-----------------------------------------------------------------------------+
The Com Addr Connectted With UPS : 0x3f8
Interval of warning : [5] Sec
=====
Unfortunately, the source tarball is not provided so I can't build it
for my NAS.
The binary package requires some new libraries (libc.so.6):
ldd PowerD
libpthread.so.0 => /lib/libpthread.so.0 (0x00000000)
libc.so.6 => not found (0x00000000)
libc.so.0 => /lib/libc.so.0 (0x00000000)
/lib/ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x00000000)
=====
That is why I decided to use NUT package.
1. OS name and version:
-Linux 2.4.28 i486
2. exact NUT version:
-NUT 2.6.0
3. NUT installation method:
-from source tarball
4. Exact device name and related information:
-SVEN Power Pro+ 500 USB
-Serial Number: K2300611
-http://en.sven.ru/catalog/ups/power_pro_plus_500.htm?tab=techchar
-------
1.
cat driver.list | grep -i sven
"SVEN" "ups" "2" "Power Pro+
series" "USB" "blazer_usb"
"SVEN" "ups" "2" "Power Smart RM
2000" "USB" "blazer_usb"
2. lsusb output
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0925:1234 Lakeview Research
Bus 001 Device 001: ID 0000:0000
3. My ups.conf
[sven]
driver = blazer_usb
subdriver = krauler #phoenix
vendorid = 0925
productid = 1234
port = auto
desc = "Power Pro+ 500"
4. I tried both subdrivers: krauler and phoenix
TRACE:
a) subdriver = krauler
blazer_usb -DDDDD -a sven
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.0)
0.000000 send_to_all: SETINFO driver.parameter.subdriver
"krauler"
0.006124 send_to_all: SETINFO driver.parameter.vendorid "0925"
0.010692 send_to_all: SETINFO driver.parameter.productid "1234"
0.015513 send_to_all: SETINFO driver.parameter.port "auto"
0.019833 debug level is '5'
0.035048 Checking device (0000/0000) (002/001)
0.039655 - VendorID: 0000
0.044173 - ProductID: 0000
0.047967 - Manufacturer: unknown
0.062021 - Product: USB OHCI Root Hub
0.065824 - Serial Number: c2ea5000
0.069610 - Bus: 002
0.073535 Trying to match device
0.077535 Device does not match - skipping
0.081861 Checking device (0925/1234) (002/002)
0.105296 - VendorID: 0925
0.109045 - ProductID: 1234
0.113067 - Manufacturer: ?
0.116558 - Product: UPS USB MON V1.4
0.120422 - Serial Number: unknown
0.124274 - Bus: 002
0.127727 Trying to match device
0.131620 Device matches
0.135701 send_to_all: SETINFO ups.vendorid "0925"
0.139549 send_to_all: SETINFO ups.productid "1234"
0.142180 send_to_all: SETINFO device.type "ups"
0.143618 send_to_all: SETINFO driver.version "2.6.0"
0.145048 send_to_all: SETINFO driver.version.internal "0.03"
0.146483 send_to_all: SETINFO driver.name "blazer_usb"
0.147638 Trying megatec protocol...
0.148781 send: Q1
0.153752 blazer_status: short reply
0.154925 Status read 1 failed
0.156041 send: Q1
0.162260 blazer_status: short reply
0.163434 Status read 2 failed
0.164553 send: Q1
0.168647 blazer_status: short reply
0.169820 Status read 3 failed
0.172152 Trying mustek protocol...
0.175677 send: QS
0.179201 read: QS
0.192951 blazer_status: short reply
0.196494 Status read 1 failed
0.200014 send: QS
0.203858 read: QS
0.207451 blazer_status: short reply
0.211282 Status read 2 failed
0.212426 send: QS
0.213547 read: QS
0.214728 blazer_status: short reply
0.215860 Status read 3 failed
0.216971 Trying megatec/old protocol...
0.218309 send: D
0.219431 read: D
0.231061 blazer_status: short reply
0.234855 Status read 1 failed
0.238379 send: D
0.241454 read: D
0.242663 blazer_status: short reply
0.243796 Status read 2 failed
0.244910 send: D
0.246031 read: D
0.247212 blazer_status: short reply
0.248343 Status read 3 failed
0.249417 No supported UPS detected
b) subdriver = phoenix
blazer_usb -DDDDD -a sven
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.0)
0.000000 send_to_all: SETINFO driver.parameter.subdriver
"phoenix"
0.005826 send_to_all: SETINFO driver.parameter.vendorid "0925"
0.020541 send_to_all: SETINFO driver.parameter.productid "1234"
0.024859 send_to_all: SETINFO driver.parameter.port "auto"
0.029125 debug level is '5'
0.065108 Checking device (0000/0000) (002/001)
0.070451 - VendorID: 0000
0.074259 - ProductID: 0000
0.078036 - Manufacturer: unknown
0.092181 - Product: USB OHCI Root Hub
0.095960 - Serial Number: c2ea5000
0.099916 - Bus: 002
0.103633 Trying to match device
0.107319 Device does not match - skipping
0.111319 Checking device (0925/1234) (002/002)
0.123044 - VendorID: 0925
0.126804 - ProductID: 1234
0.130632 - Manufacturer: ?
0.134361 - Product: UPS USB MON V1.4
0.138096 - Serial Number: unknown
0.141780 - Bus: 002
0.145374 Trying to match device
0.149080 Device matches
0.163575 send_to_all: SETINFO ups.vendorid "0925"
0.167397 send_to_all: SETINFO ups.productid "1234"
0.171890 send_to_all: SETINFO device.type "ups"
0.175916 send_to_all: SETINFO driver.version "2.6.0"
0.179929 send_to_all: SETINFO driver.version.internal "0.03"
0.183747 send_to_all: SETINFO driver.name "blazer_usb"
0.187291 Trying megatec protocol...
1.199967 flush: No error
1.204066 send: Q1
1.206265 read: timeout
1.208097 blazer_status: short reply
1.210009 Status read 1 failed
2.219900 flush: No error
2.223968 send: Q1
2.226069 read: timeout
2.227903 blazer_status: short reply
2.229802 Status read 2 failed
3.239855 flush: No error
3.243899 send: Q1
3.246002 read: timeout
3.247837 blazer_status: short reply
3.249746 Status read 3 failed
3.251589 Trying mustek protocol...
4.260880 flush: No error
4.264924 send: QS
4.267025 read: timeout
4.268860 blazer_status: short reply
4.270759 Status read 1 failed
5.280825 flush: No error
5.284903 send: QS
5.287007 read: timeout
5.288843 blazer_status: short reply
5.290748 Status read 2 failed
6.300791 flush: No error
6.304869 send: QS
6.306975 read: timeout
6.308812 blazer_status: short reply
6.310715 Status read 3 failed
6.312553 Trying megatec/old protocol...
7.320751 flush: No error
7.324799 send: D
7.326906 read: timeout
7.328743 blazer_status: short reply
7.330644 Status read 1 failed
8.340767 flush: No error
8.344811 send: D
8.346913 read: timeout
8.348747 blazer_status: short reply
8.350648 Status read 2 failed
8.352970 flush: error submitting URB: No space left on device
8.358774 send: D
8.366907 read: error submitting URB: No space left on device
8.370027 blazer_status: short reply
8.371874 Status read 3 failed
8.373678 No supported UPS detected
c) SYSLOG output
Mar 17 16:30:39 myNAS upsd[428]: listen_add: added 127.0.0.1:3493
Mar 17 16:30:39 myNAS upsd[428]: setuptcp: try to bind to 127.0.0.1 port 3493
Mar 17 16:30:39 myNAS upsd[428]: listening on 127.0.0.1 port 3493
Mar 17 16:30:39 myNAS upsd[428]: Can't connect to UPS [sven]
(blazer_usb-sven): No such file or directory
Mar 17 16:30:39 myNAS upsd[428]: mainloop: polling 1 filedescriptors
Mar 17 16:30:41 myNAS upsd[428]: mainloop: no data available
Mar 17 16:30:41 myNAS upsd[428]: mainloop: polling 1 filedescriptors
Mar 17 16:30:43 myNAS upsd[428]: mainloop: no data available
Mar 17 16:30:43 myNAS upsd[428]: mainloop: polling 1 filedescriptors
Mar 17 16:30:45 myNAS upsd[428]: mainloop: no data available
Mar 17 16:30:45 myNAS upsd[428]: Signal 2: exiting
Regards
Sergey