Hontvári József Levente
2013-Nov-22 17:20 UTC
[Nut-upsuser] nutdrv_qx does not support UPS, blazer_ups does
Hello All, I tested our new UPS yesterday. I noticed that while the blazer_ups drivers support this device, the newer nutdrv_qx does not. I suppose that this should not be the case, as nutdrv_qx will replace blazer_ups(?). Versions: I installed Nut on Ubuntu 13.10 (64 bit) from the standard package (2.6.4-2.3ubuntu2), and I also installed from the source tarball (2.7.1), into a different directory. The UPS is Pannon Power M1500 also called Micro 1500. This seems to be a very similar device: http://www.kstarpower.com/ProductDetail.aspx?ProductId=5abd8617-f121-4cef-b2b0-c96a16cb6c56 Both blazer_ups versions recognized the device. I attached logs. Levente -------------- next part -------------- root at munka:/usr/local/ups# bin/nutdrv_qx -DDD -a ups -u nut Network UPS Tools - Generic Q* USB/Serial driver 0.01 (2.7.1) USB communication driver 0.32 0.000000 debug level is '3' 0.001093 upsdrv_initups... 0.001195 Language ID workaround enabled (using '0x4095') 0.656270 Checking device (1D6B/0001) (007/001) 0.720259 - VendorID: 1d6b 0.720292 - ProductID: 0001 0.720303 - Manufacturer: unknown 0.720314 - Product: unknown 0.720324 - Serial Number: unknown 0.720334 - Bus: 007 0.720344 Trying to match device 0.720358 Device does not match - skipping 0.720410 Checking device (1D6B/0001) (006/001) 0.784263 - VendorID: 1d6b 0.784338 - ProductID: 0001 0.784416 - Manufacturer: unknown 0.784458 - Product: unknown 0.784511 - Serial Number: unknown 0.784549 - Bus: 006 0.784601 Trying to match device 0.784653 Device does not match - skipping 0.784734 Checking device (1D6B/0001) (005/001) 0.848267 - VendorID: 1d6b 0.848301 - ProductID: 0001 0.848312 - Manufacturer: unknown 0.848323 - Product: unknown 0.848334 - Serial Number: unknown 0.848345 - Bus: 005 0.848355 Trying to match device 0.848369 Device does not match - skipping 0.848421 Checking device (0001/0000) (004/002) 1.852640 - VendorID: 0001 1.852730 - ProductID: 0000 1.852781 - Manufacturer: unknown 1.852830 - Product: STD UPS MON V1.0 1.852887 - Serial Number: unknown 1.852978 - Bus: 004 1.853042 Trying to match device 1.853107 Device matches 1.856636 First supported language ID: 0x409 (please report to the NUT maintainer!) 1.856760 send: QGS 1.856818 read: QGS 1.856932 qx_process_answer: short reply (input.voltage) 1.857046 send: QGS 1.857112 read: QGS 1.857185 qx_process_answer: short reply (input.voltage) 1.857259 send: QGS 1.857318 read: QGS 1.857379 qx_process_answer: short reply (input.voltage) 1.857468 send: QS 1.857524 read: QS 1.857632 qx_process_answer: short reply (input.voltage) 1.857718 send: QS 1.857776 read: QS 1.857853 qx_process_answer: short reply (input.voltage) 1.857924 send: QS 1.857998 read: QS 1.858057 qx_process_answer: short reply (input.voltage) 1.858136 send: D 1.858195 read: D 1.858282 qx_process_answer: short reply (input.voltage) 1.858362 send: D 1.858439 read: D 1.858494 qx_process_answer: short reply (input.voltage) 1.858570 send: D 1.858625 read: D 1.858687 qx_process_answer: short reply (input.voltage) 1.858772 send: Q1 2.556700 received 96 (96) 2.556772 read: (226.9 226.9 226.9 005 49.8 27.6 --.- 00001001 2.556930 send: I 3.056717 received 6 (6) 3.056804 read: # 3.056863 qx_process_answer: short reply (ups.firmware) 3.056929 send: Q1 3.750740 received 96 (96) 3.750827 read: (227.4 226.9 226.9 005 49.8 27.6 --.- 00001001 3.750894 send: I 4.250759 received 6 (6) 4.250844 read: # 4.250884 qx_process_answer: short reply (ups.firmware) 4.250936 send: Q1 4.943782 received 96 (96) 4.943867 read: (226.9 226.9 227.4 005 49.8 27.6 --.- 00001001 4.943933 send: I 5.443796 received 6 (6) 5.443882 read: # 5.443924 qx_process_answer: short reply (ups.firmware) 5.443995 send: Q1 6.137823 received 96 (96) 6.137908 read: (226.9 226.9 226.9 005 49.8 27.6 --.- 00001001 6.138022 send: I 6.637840 received 6 (6) 6.637926 read: # 6.637979 qx_process_answer: short reply (ups.firmware) 6.638046 send: Q1 7.331866 received 96 (96) 7.331954 read: (226.9 226.9 226.9 005 49.8 27.6 --.- 00001001 7.332023 send: I 7.831881 received 6 (6) 7.831978 read: # 7.832020 qx_process_answer: short reply (ups.firmware) 7.832075 send: Q1 8.524903 received 96 (96) 8.524989 read: (226.9 226.9 227.4 005 49.8 27.6 --.- 00001001 8.525053 send: I 9.025918 received 6 (6) 9.026003 read: # 9.026043 qx_process_answer: short reply (ups.firmware) 9.026109 send: Q1 9.718951 received 96 (96) 9.719052 read: (226.9 226.9 226.9 005 49.8 27.6 --.- 00001001 9.719168 send: FW? 9.719232 read: FW? 9.719298 qx_process_answer: short reply (ups.firmware) 9.719414 send: Q1 10.419971 received 96 (96) 10.420058 read: (226.9 226.4 226.4 005 49.8 27.6 --.- 00001001 10.420160 send: FW? 10.420242 read: FW? 10.420288 qx_process_answer: short reply (ups.firmware) 10.420340 send: Q1 11.119994 received 96 (96) 11.120083 read: (226.9 226.9 226.9 005 49.8 27.6 --.- 00001001 11.120179 send: FW? 11.120245 read: FW? 11.120290 qx_process_answer: short reply (ups.firmware) 11.120363 Device not supported! 11.120408 Device not supported! -------------- next part -------------- root at munka:/usr/local/ups# bin/blazer_usb -DDD -a ups -u nut Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (2.7.1) 0.000000 debug level is '3' 0.001146 language ID workaround enabled (using '0x4095') 0.655405 Checking device (1D6B/0001) (007/001) 0.718449 - VendorID: 1d6b 0.718562 - ProductID: 0001 0.718615 - Manufacturer: unknown 0.718656 - Product: unknown 0.718724 - Serial Number: unknown 0.718778 - Bus: 007 0.718823 Trying to match device 0.718873 Device does not match - skipping 0.718959 Checking device (1D6B/0001) (006/001) 0.782438 - VendorID: 1d6b 0.782513 - ProductID: 0001 0.782594 - Manufacturer: unknown 0.782635 - Product: unknown 0.782700 - Serial Number: unknown 0.782751 - Bus: 006 0.782803 Trying to match device 0.782857 Device does not match - skipping 0.782943 Checking device (1D6B/0001) (005/001) 0.846438 - VendorID: 1d6b 0.846550 - ProductID: 0001 0.846606 - Manufacturer: unknown 0.846657 - Product: unknown 0.846728 - Serial Number: unknown 0.846787 - Bus: 005 0.846841 Trying to match device 0.846904 Device does not match - skipping 0.847065 Checking device (0001/0000) (004/003) 1.850638 - VendorID: 0001 1.850731 - ProductID: 0000 1.850779 - Manufacturer: unknown 1.850833 - Product: STD UPS MON V1.0 1.850895 - Serial Number: unknown 1.850962 - Bus: 004 1.851026 Trying to match device 1.851090 Device matches 1.854634 First supported language ID: 0x409 (please report to the NUT maintainer!) 1.854730 Trying megatec protocol... 1.854799 send: Q1 2.548702 received 96 (96) 2.548775 read: (225.9 225.9 226.4 005 49.8 27.6 --.- 00001001 2.548945 blazer_status: non numerical value [--.-] 2.549042 Status read in 1 tries 2.549152 Supported UPS detected with megatec protocol 2.549217 send: F 3.138723 received 46 (46) 3.138794 read: #230.0 003 24.00 50.0 3.138902 Ratings read in 1 tries 3.138970 send: I 3.640739 received 6 (6) 3.640809 read: # 3.640870 blazer_vendor: short reply 3.640930 Vendor information read 1 failed 3.640990 send: I 4.143756 received 6 (6) 4.143825 read: # 4.143883 blazer_vendor: short reply 4.143947 Vendor information read 2 failed 4.144026 send: I 4.646773 received 6 (6) 4.646843 read: # 4.646901 blazer_vendor: short reply 4.646977 Vendor information read 3 failed 4.647050 Vendor information unavailable 4.647097 No values provided for battery high/low voltages in ups.conf 4.647193 Using 'guestimation' (low: 20.800000, high: 26.000000)! 4.647260 Battery runtime will not be calculated (runtimecal not set) 4.647410 send: Q1 5.339798 received 96 (96) 5.339869 read: (225.9 225.9 225.9 005 49.8 27.6 --.- 00001001 5.340005 blazer_status: non numerical value [--.-] 5.340244 dstate_init: sock /var/state/ups/blazer_usb-ups open on fd 5 5.340323 send: Q1 6.040824 received 96 (96) 6.040896 read: (225.9 225.4 225.4 005 49.8 27.6 --.- 00001001 6.041011 blazer_status: non numerical value [--.-] 7.341721 send: Q1 8.033890 received 96 (96) 8.033964 read: (225.4 225.4 225.4 005 49.8 27.6 --.- 00001001 8.034076 blazer_status: non numerical value [--.-] 9.343116 send: Q1 10.035959 received 96 (96) 10.036032 read: (225.4 225.4 225.4 005 49.8 27.6 --.- 00001001 10.036142 blazer_status: non numerical value [--.-]
Charles Lepple
2013-Nov-26 03:33 UTC
[Nut-upsuser] nutdrv_qx does not support UPS, blazer_ups does
On Nov 22, 2013, at 12:20 PM, Hontv?ri J?zsef Levente wrote:> I tested our new UPS yesterday. I noticed that while the blazer_ups > drivers support this device, the newer nutdrv_qx does not. I suppose > that this should not be the case, as nutdrv_qx will replace blazer_ups(?).Not sure if Dan contacted you off-list, but he cited your email in this pull request, just after 2.7.1 was released: https://github.com/networkupstools/nut/pull/72 https://github.com/networkupstools/nut/pull/72.patch -- Charles Lepple clepple at gmail