similar to: Polycom and SIP message

Hello! I have a Polycom phone and sometimes I need to transfer calls without picking them up to local extensions. Polycom has a transfer button which sends SIP 302 packet to asterisk. Another local extension, receiving the call, sees not the original number but the local number that was transferring the call. I would like that the original number is shown. I am stuck at this point. I see messages

Hi. I have several Asterisk 1.4.21 machines, each with ISDN cards in them, and Polycom SIP phones on people's desks. Making / receiving internal / external calls works fine - no problems. We're using 4-digit extension numbers in the offices. I'm trying to work out how to provide a remote pickup facility along the following lines: - phone extension 2233 rings - person at

I need to run the same worker''s method twice per day with different arguments. Unfortunately, only the second entry in the schedule is firing. I created an experimental worker to verify this: Worker: class ExperimentWorker < BackgrounDRb::MetaWorker set_worker_name :experiment_worker def create(args = nil) # this method is called, when worker is loaded for the first time

G'Day All, How do I fix this: I receive a call at the extension. Press the hold button. Music on hold starts. When I place the handset back on the cradle, the call gets hung up/disconnected. The Phone is A GrandStream Budge Tone 100. Thanks

Hi List; Can someone advise me if Polycom support H323 that work fine with Asterisk? And wether this H323 Polcyom devices more costly than SIP Polycom. Also, I am not able to know if new Polycom come with PoE adaptor so no need for PoE Switch (can use normal switch that does not support PoE)? Do I need any special cable for Polycom or normal Ethernet cable? Regards Bilal

I was previously having an issue with a Polycom phone and Polycom support said that Asterisk didn't play well with Polycom firmware versions 1.6.7 and newer due to SIP compatibility issues. I believe I heard a lot of things were fixed\adjusted in 1.4 and was wondering if anyone has had success with Asterisk 1.4 and the latest Polycom firmware releases. -------------- next part

Hi, we have an asterisk 1.2.1 box and 2 polycom SIP phones. We'd like to show the called name on the calling polycom display instead of his /her extensions as I do with the caller name on the called polycom. Is it possible? If yes, how? TIA Giorgio Incantalupo

I'm having a problem with polycom ip601. If I Dial() directly eg Dial(SIP/4000) it works perfectly. The polycom rings, and stops ringing as soon as I hang up. But if the phone is called via a queue, the polycom continues to ring long after I've hung up. Other phones in the queue (grandstream, cisco) don't have this problem, and stop ringing properly when I hang up. polycom bug

Off topic. Anyone know where I can get Polycom SIP software v1.6.6, unofficially? Not that Polycom is analy retentive, or anything like that... Doug

Hi, Has anyone used polycom phone IP500/600's conference feature? I ran into some issues. Polycom is not behind NAT. Polycom calls pstn number A, (gets two way voice), presses conference, (A is put on hold), calls pstn number B, (gets two way voice), presses conference again, suppose to have all three parties in the call, polycom and B have two way voice, but polycom doesn't have two

Has anyone ever gotten the Polycom Status feature, accessible via the 'MyStat' soft-key to work? When you change the status in this way, the phone does not send any communication to Asterisk, and it seems to have no effect in incoming calls. So... what's it for? Doug

Hi All, We are in search of the latest Polycom firmware SIP 1.6.5 and BootROM 3.1.3as per http://www.polycom.com/resource_center/1,,pw-492,00.html Can someone help? We have legitimately obtained these phones but even our official distributor can't get their hands on updated firmware. The only thing we have found is http://www.freedomphones.net/polycom/files/?M=A which has only old versions.

Hi, I know that if you have Polycom phones properly configured, you can use "sip notify polycom-check-cfg SIP_REGISTRATION_ID" to have the phones download the new configuration from the provisioning server and reboot. Is there anyway to send the same command to all peers (let's say I had 50 polycom phones that I wanted to reboot)? Thanks, Mike -------------- next part

Hi, Where should I go to get the Polycom`s latest official (non-beta) version? I am registered on the Polycom customer website but that doesn't seem accessible. Regards, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061102/284b67a7/attachment.htm

How can I safely mock a singleton without the mocked method living on outside the scope of the test method? I''ve run into this problem with mocking methods on globals (gasp!) in the past by doing something like def mock_my_global original = $my_global $my_global.expects(:foo).returns(''bar'') yield $my_global = original end Is there something similar I

Hi I am struggling with hardware choices to get started with. My options are narrowed down to SIP phones - Polycom IP500, IP600 and Cisco 7940G. of importance is: - functionality / integration with asterisk - headset functionality and use - voice quality - build quality Is there much of a difference between Polycom and Cisco? Scanning the group it looks like there may be slightly more

Hi, I have a really strange problem with a Polycom 430 phone and Asterisk 1.4.20. Currently If I dial the Polycom from my mobile phone answer the call on the Polycom and then hangup the mobile the call ends fine on the Polycom. But if I call from the Polycom to my mobile and then I hang up the mobile the Polycom thinks the call is still active. However doing a show sip channels shows the the

Hello, Has anyone on the list been able to successfully setup a Polycom Soundpoint 500 IP phone? I am getting failed registrations, and the Polycom documentation is not very precise. Their web interface isn't helping much either. Thanks in advance, Brent -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I'm having an odd problem with my polycom 301. I am initiating a call to it with AMI Originate() function: Action: Originate Channel: local/112 at Management Context: to_meetme Exten: s Priority: 1 Variable: dropped_conf=111 The "to_meetme" context is very simple: [to_meetme] exten=>s,1,MeetMe(${dropped_conf},id) If I specify every other device I have to test: *

Hi, I just got a Polycom 330 and, of course, I don't have the firmware and sip.cfg files to provision it. Where can I get those? Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070605/a14615c8/attachment.htm