similar to: PowerCom Smart King SMK-1000

Hi *Simon, i got a similar setup here (also a powercom-oem-product, but in my case labeled by a swiss "manufacturer") with the same problems, using powercom's upsmon works fine, while nut completely refuses to cooperate. after trying almost everything i somehow hopeless surfed on the official nut-page, when i saw that there are powercom-products which don't need the

Hey all, I've tried some very base configs with the powercom 2200, but I can't seem to get it to work. Has anyone dealt with these UPSes before, or know if they use the standard powercom drivers? I'd be more than happy to allow access to my test system so someone more knowledgeable can take a look (and am also willing to pay something for the solution of said problem.) -Dan

Hi list here is the patch to make fentonups recognize some PowerCOM's UPS's, and to setup terminal lines for them (at least for SMK-1500a) as powercom's original upsmon do. fentonups -x powercom works correctly with SMK-1500a (it screamed ''Communications with UPS lost - check cabling' or 'Short read during UPS id sequence' without this patch). Sorry for

Hi, I have a little problem with PowerCom BNT600AP after running driver I see: root@rask> powercom -D /dev/ttyS1 Network UPS Tools - PowerCom and similars protocol UPS driver $ Revision: 0.5 $ (2.0.2) debug level is '1' Values of arguments: manufacturer : 'PowerCom' model name : 'Unknown' serial number : 'Unknown' line

G'day. I have a UPS here that is driven by the Fenton UPS driver, and which requests that I report the ID string to the NUT developers: root@anu:~# upsdrvctl start smk800 Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - Fenton UPS driver 1.22 (2.0.4) Unknown ups - please report this ID string: #M+H SMK-800 2000 V6.2 Detected Unknown MK-800 on /dev/ttyS0 The

Hi Alex, I've forwarded your request to the nut-upsuser mailing list. Please follow the discussion there. I'm also not sure to have well understood your issue. Don't hesitate to explain it a bit more if I'm wrong... Alex wrote: > ASP Linux Server II. >UPS POWERCOM SMART KING 800A. > > >Has Putted (deliver) NUT. The Driver (according to ?????) fentonups. Like works

Dino, Alexey, there are a number of users suffering issues with your Powercom devices. Could you (Dino, and Keven if possible) please have a look at the below one, from Angela, and check for a fix? I've scheduled to release 2.6.1 next week, and having that fixed is part of the list. 2011/5/16 Angela Williams <angierfw at gmail.com> > Hi All > > On Friday 13 May 2011 at

Mr Claesson, with my current configuration, the ups.status when the UPS is disconnected from the mains is "OB". There is no more "OB BOOST". Now my upsd.users is: [root] password = password allowfrom = localhost upsmon master actions = SET instcmds = ALL and upsmon.conf is: RUN_AS_USER root MONITOR Inform@localhost 1 root password master MINSUPPLIES 1 SHUTDOWNCMD

Hello all. Try this driver (for nut 2.2.0). See attach. - Trust, KP625AP, Egys models stay as it was - add Powercom's Black Knight Pro model support ( BNT-400/500/600/800/801/1000/1200/1500/2000AP 220-240V ) - add Powercom's King Pro model support ( KIN-425/525/625/800/1000/1200/1500/1600/2200/3000/5000AP[-RM] 100-120,200-240 V) - add Powercom's Imperial model support ( IMP-xxxAP,

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

Good afternoon. I try to put nut on gentoo. Has executed installation by a standard command emerge nut. All has passed successfully. I use UPS POWERCOM BNT-1500AP. It is connected to serial port 1, i.e. for my system it/dev/tts/0. In/etc/nut/ups.conf [powercom] driver = powercom port = /dev/tts/0 desc = "PowerCom BNT-1500AP on IP-PBX" modelname = "BNT-1500AP" linevoltage = 230

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Has anyone used nut with a XPCC UPS, in particular one of the XVRT units? Their supplied monitoring tool "works", but I'd really prefer to use nut if possible. I've systematically gone through each of the drivers in /lib/nut and none seem to talk with the unit properly. I'll be talking with a XPCC support person tomorrow, though

Hello I have UPS Powercom Black Knight Pro 1200 (BNT-1200AP) I try to use nut, but powercom driver not understand my model Ok, i try to use type KIN1500AP and it's work But powercom driver can't set UPS's shutdown delay time Also i have powercom's original program (upsmon), and this program can do it What can i do for help to add this function to nut's powercom driver? For

Hi ALL, Powercom Imperial IMP-525AP seems to be fully compatible with NUT. Unfortunately, I can not disable beeper. upscmd -u {NUT_USER} -p {NUT_PASSWORD} powercom beeper.toggle returns *OK*, however, ups.beeper.status=enabled Thank you, Sergey ========== Additional info: 1) $ upsc powercom battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 30 battery.date: 2010/01/01

Hello Does anybody know if it's possible to monitor a Powercom EBk 500 (RS232)? the trick is that I am using a raspberry pi, it does not have RS232 so I connected a keyspan RS232 to USB adapter, but so far I can?t make this work. Thanks for your time to read this. -Edgar -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi. Sorry for the English. Use online translator. Trying to configure Powercom Smart KING Pro 1250A and Debian Jessie. OS name and version: Debian Jessie 8.8, kernel 4.9.25-1~bpo8+1 exact NUT version: 2.7.2-4 NUT installation method: package exact device name and related information: Powercom Smart KING Pro 1250A (connect via usb; leads changed) complete problem description, with any relevant

Hi. Sorry for the English. Use online translator. Trying to configure Powercom Smart KING Pro 1250A and Debian Jessie. OS name and version: Debian Jessie 8.8, kernel 4.9.25-1~bpo8+1 exact NUT version: 2.7.2-4 NUT installation method: package exact device name and related information: Powercom Smart KING Pro 1250A (connect via usb; leads changed) complete problem description, with any relevant

Hi, I know it's been a topic many times here, but I've searched the archives, googled for days, and I simply don't believe, that there is still no solution to this. I'm using a PowerCom BNT-600AP ups with usb port. I've downloaded the latest version from svn, compiled it, and tried to use it: * megatec(_usb) - no luck, it did not find the UPS (I?ve read in this list, that

Hello, Some time ago i bought 2 OPTI UPS devices, but was really sad to see the page about the OPTI protocol on the nut page. But i don't wanted to give up :) So i sniffed the serial communication using the windows application/driver and found out that these PS (PowerSeries) devices are different than the ES series mentioned on the Nut page. They use some kind of ASCII protocol, with the

Alexey, I posted this before, but never got a reply. So I'm reposting this again. In the present HID PDC implementation by PowerCOM, expect problems with the non-compliant implementation of the DelayBeforeShutdown and DelayBeforeStartup pages. Third party applications will expect that these follow the HID PDC specifications if you name them like this (and break terribly in the