similar to: HP R1500 G3 problems II

Hi there, OS: (L)ubuntu 12.04 precise LTS Nut: 2.6.3-1ubuntu1.1 Installation Method: Package (apt-get install nut) Hardware: HP R1500 G3 INT Hardware-Specs: http://h18004.www1.hp.com/products/quickspecs/14059_div/14059_div.pdf Problem: I tried to set up nut with our new arrived HP R1500 G3 UPS but there is a failure with the usb connection. After trying "/lib/nut/usbhid-ups -DD -a

Hi there, my HP R1500 G3 UPS doesn't apply my battery.charge.low value i set via upsrw. Is this a common problem with this model in nut 2.6.4? Any ideas how to force the UPS to accept this value? Regards Jan % upsc hp1500 battery.charge: 100 battery.charge.low: 20 battery.charge.warning: 20 battery.runtime: 23917 battery.temperature: 49.0 battery.type: PbAc battery.voltage: 39.0

On Aug 7, 2013, at 7:40 AM, Jan Phillip Greimann wrote: > I tried to set up nut with our new arrived HP R1500 G3 UPS but there is a failure with the usb connection. After trying "/lib/nut/usbhid-ups -DD -a hp1500" the log says there are "libusb_get_interrupt: Connecion timed out". If you start upsd, what does "upsc hp1500" return? There are two ways to fetch

On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > Hi there, > > OS: (L)ubuntu 12.04 precise LTS > Nut: 2.6.3-1ubuntu1.1 > Installation Method: Package (apt-get install nut) > Hardware: HP R1500 G3 INT FYI: I have a different UPS, a HP R3000 XR and I monitor it using serial and the bcmxcp driver. [R3000XR] port = /dev/ttyUSB0 driver =

On 08/08/2013, at 18.58, Alf H?gemark <alf at i100.no> wrote: > On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: >> On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: >> >>> Hi there, >>> >>> OS: (L)ubuntu 12.04 precise LTS >>> Nut: 2.6.3-1ubuntu1.1 >>> Installation Method: Package (apt-get install nut)

On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: > On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > >> Hi there, >> >> OS: (L)ubuntu 12.04 precise LTS >> Nut: 2.6.3-1ubuntu1.1 >> Installation Method: Package (apt-get install nut) >> Hardware: HP R1500 G3 INT > > FYI: > I have a different UPS, a HP R3000 XR and I monitor

=?ISO-8859-1?Q?Alf_H=F8gemark?= <alf at i100.no> writes: > I am working on improving the bcmxcp driver, to add more data reported > from the driver, and also add support for sending more commands to the ups. > The code changes are currently not part of any release, but they are in > github, and some more are on the way. > Would you be able to do some testing on your HP R3000

On Apr 12, 2017, at 3:23 AM, me at electronico.nc wrote: > > Hello, > > Control HP R1500 G2 with nut via USB. > > Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64) > nut V2.7.1 installed from repository > > /etc/nut/ups.conf > [HPR1500] > driver=usbhid-ups > port=auto > > After dealing hours with this, hope this will help some : > > rename

I'm attempting to get a HP R1500 G2 UPS working with Solaris 10 connected via USB. Thanks to Arnaud's patch to drivers/tripplite-hid.c found at http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-February/005887.html things mostly work. upsc ups01 shows a couple of things that don't look quite right. [....] battery.temperature: -234.1 [....] ups.alarm: No battery installed!

Hello, Control HP R1500 G2 with nut via USB. Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64) nut V2.7.1 installed from repository /etc/nut/ups.conf [HPR1500] driver=usbhid-ups port=auto After dealing hours with this, hope this will help some : rename udev rule to higher priority and move it to its right location, reload udev rules mv /lib/udev/rules.d/52-nut-usbups.rules

On 12/04/17 09.23, me at electronico.nc wrote: > Hello, > > Control HP R1500 G2 with nut via USB. > > Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64) > nut V2.7.1 installed from repository > > /etc/nut/ups.conf > [HPR1500] > driver=usbhid-ups > port=auto > > After dealing hours with this, hope this will help some : > > rename udev rule to higher

Hi, I have a HP R1500 G2 UPS and want to get it working under Debian Lenny - as this OS is not supported by HP I'm trying to use nut for it - but I can't get it working. Do I have any chance to get the UPS running with nut. I also tried different drivers but had no luck either. Or does anyone has experience with HP UPS under debian ? Any help would be nice ! I tried /lib/nut/usbhid-ups

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! Has anyone gotten it working at all with Linux :) I picked one up for thiry bucks and would love to monitor it! Liz - -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) iD8DBQFD/5fEIACpLcG4dhwRAmeCAJ9+8FGXqKoOlZdkw/KFXb9n0PEemwCdHaoD NVnv7JjmBAjNsExK6WzAdnA= =pcPX - -----END PGP

Hi, I'd like to inform You that this UPS communicates well via the serial port. I haven't tested USB, and no shutdown testing so far, however, I hope it will run well. HP R5000 upsc output: ambient.temperature: 27.4 ambient.temperature.high: 45 battery.charge: 99.0 battery.runtime: 536 battery.voltage: 236.3 device.mfr: Eaton device.model: HP R5000 5000i device.serial: 3C81520083

Dear LLVMdev, I've noticed an unusual behavior of the LLVM x86 code generator (with default options) that results in nearly a 4x slow-down in floating-point throughput for my microbenchmark. I've written a compute-intensive microbenchmark to approach theoretical peak throughput of the target processor by issuing a large number of independent floating-point multiplies. The distance

Hi all. I am running the 2.4.18-3smp kernel and over the poast couple of days, ext3 has been crashing. Here is the output: Assertion failure in journal_commit_transaction() at commit.c:535: "buffer_jdirty(bh)" ------------[ cut here ]------------ kernel BUG at commit.c:535! invalid operand: 0000 loop autofs nfs lockd sunrpc 3c59x ns83820 ide-scsi ide-cd cdrom usb-uhci usbc CPU: 0

Hi there. I got myself a pair of old Intel Xeon blades, which I plan to repurpose with CentOS. The model is : HP bl20p-g3 server blade Manual http://h18004.www1.hp.com/products/quickspecs/12322_ca/12322_ca.pdf Now, the main problem with this hardware is that LVD UW SCSI HDDs are hard to find and hella expensive if you find em (and of reduced capacity). Any of you know: 1. If there's any

Hi, just testing with a HP R1500 XR (answers as Powerware) with SNMP/Serial Port Card using SNMP I found: 1st: The batt status 1.3.6.1.4.1.534.1.2.5.0 goes away after some time. Isn't visible in a snmpwalk anymore, seems to be a bug in the card. 2nd: The ups turns into "resting" 48h after battery is full. It turns off the fan, the batt voltage lowers a little, it seems, avoiding

greetings i have a few dual P3 Compaq 1850R units and use compaq smartstart 5.5 on them before a CentOS 4 load i have acquired some dual P3 Compaq DL380 G1 i.e. Generation 1 units and am wondering which specific smartstart download i should be using for them from this URL below h18004.www1.hp.com/support/files/server/us/subscription/ssdownloads.asp would someone please share their experience

Hello, I current using dovecot 2.0.11 and with all other 2x versions occurring the same problem. When i create the file .dovecot.sieve and compiled one .dovecot.svbin on user homedir, the imap show it like a folder, example: doveadm mailbox list -u user at domain.com .. .. *dovecot.sieve* *dovecot.svbin* .. .. I current using maildir and mail location is: *mail_location =