thr3ads.net - Nut upsuser - [Nut-upsuser] HP R1500 G2 USB on Ubuntu [HCL] [Apr 2017]

If this information is useful, please help other people find it:
Share via:

me at electronico.nc

2017-Apr-12 07:23 UTC

[Nut-upsuser] HP R1500 G2 USB on Ubuntu

Hello,

Control HP R1500 G2 with nut via USB.

Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64)
nut V2.7.1 installed from repository

/etc/nut/ups.conf
[HPR1500]
driver=usbhid-ups
port=auto

After dealing hours with this, hope this will help some :

rename udev rule to higher priority and move it to its right location, 
reload udev rules
mv /lib/udev/rules.d/52-nut-usbups.rules 
/lib/udev/rules.d/62-nut-usbups.rules
cp /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/
udevadm control --reload-rules
udevadm trigger
reboot server to be sure everything is OK

Nicolas

upsc HPR1500
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 20
battery.charge.warning: 20
battery.runtime: 24171
battery.temperature: 46.0
battery.type: PbAc
battery.voltage: 41.0
battery.voltage.nominal: 36.0
device.mfr: Hewlett-Packard
device.model: HP R1500 G2 UPS
device.part: 416830-002
device.serial: 3Cxxxxxxxx (not usefull)
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version: 2.7.1
driver.version.data: TrippLite HID 0.81
driver.version.internal: 0.38
input.frequency: 50.0
input.transfer.high: 266.0
input.transfer.low: 194.0
input.voltage: 234.0
input.voltage.nominal: 230
output.current: 0.00
output.frequency: 0.0
output.frequency.nominal: 50
output.voltage: 0.0
output.voltage.nominal: 230
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.firmware: 768
ups.load: 0
ups.load.nominal: 80
ups.mfr: Hewlett-Packard
ups.model: HP R1500 G2 UPS
ups.power: 0.0
ups.power.nominal: 1500
ups.productid: 1fe0
ups.serial: 3C80341001
ups.status: OL CHRG
ups.test.result: No test initiated
ups.timer.reboot: -1
ups.timer.shutdown: -1
ups.timer.start: -1
ups.vendorid: 03f0

Jon Bendtsen

2017-Apr-12 08:34 UTC

head link

[Nut-upsuser] HP R1500 G2 USB on Ubuntu

On 12/04/17 09.23, me at electronico.nc wrote:> Hello,
>
> Control HP R1500 G2 with nut via USB.
>
> Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64)
> nut V2.7.1 installed from repository
>
> /etc/nut/ups.conf
> [HPR1500]
> driver=usbhid-ups
> port=auto
>
> After dealing hours with this, hope this will help some :
>
> rename udev rule to higher priority and move it to its right location,
reload
> udev rules
> mv /lib/udev/rules.d/52-nut-usbups.rules
/lib/udev/rules.d/62-nut-usbups.rules
> cp /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/
> udevadm control --reload-rules
> udevadm trigger
> reboot server to be sure everything is OK
what was the issue before that?

[cuuut]
> ups.serial: 3C80341001
if you put that in the ups.conf definition, would it have made it detect it 
without the issues above?


[HPR1500]
driver=usbhid-ups
port=auto
serial = 3C80341001



JonB

Charles Lepple

2017-Apr-12 12:41 UTC

head link

[Nut-upsuser] HP R1500 G2 USB on Ubuntu [HCL]

On Apr 12, 2017, at 3:23 AM, me at electronico.nc wrote:> 
> Hello,
> 
> Control HP R1500 G2 with nut via USB.
> 
> Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64)
> nut V2.7.1 installed from repository
> 
> /etc/nut/ups.conf
> [HPR1500]
> driver=usbhid-ups
> port=auto
> 
> After dealing hours with this, hope this will help some :
> 
> rename udev rule to higher priority and move it to its right location,
reload udev rules
> mv /lib/udev/rules.d/52-nut-usbups.rules
/lib/udev/rules.d/62-nut-usbups.rules
> cp /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/
> udevadm control --reload-rules
> udevadm trigger
> reboot server to be sure everything is OK
Yes, this has been a known issue for a while:

 * https://bugs.launchpad.net/ubuntu/+source/nut/+bug/1099947
 * https://bugzilla.redhat.com/show_bug.cgi?id=488368
 * https://github.com/networkupstools/nut/issues/140
> Nicolas
> 
> upsc HPR1500
> Init SSL without certificate database
> battery.charge: 100
> battery.charge.low: 20
> battery.charge.warning: 20
> battery.runtime: 24171
^ If you add a dummy load, does this number go down to something that correlates
with the battery runtime rating?
> battery.temperature: 46.0
^ Seems a little high, even for charging.
> battery.type: PbAc
> battery.voltage: 41.0
> battery.voltage.nominal: 36.0
> device.mfr: Hewlett-Packard
> device.model: HP R1500 G2 UPS
> device.part: 416830-002
> device.serial: 3Cxxxxxxxx (not usefull)
> device.type: ups
> driver.name: usbhid-ups
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.version: 2.7.1
> driver.version.data: TrippLite HID 0.81
> driver.version.internal: 0.38
> If you have time before putting this UPS into production, can you grab upsrw and
upscmd output, as mentioned here?
http://networkupstools.org/stable-hcl.html#footnotes

We have the upsc output for this UPS via serial port (bcmxcp driver), but not
upsrw/upscmd: http://networkupstools.org/ddl/HP/R1500_G2.html

I would also recommend shutdown testing, but 14.04 is pretty reliable in this
area (16.04 has some issues with powerdown, IIRC).
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Nicolas

2017-Apr-17 20:38 UTC

head link

[Nut-upsuser] HP R1500 G2 USB on Ubuntu

On 12/04/2017 19:34, Jon Bendtsen wrote:> On 12/04/17 09.23, me at electronico.nc wrote:
>> Hello,
>>
>> Control HP R1500 G2 with nut via USB.
>>
>> Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64)
>> nut V2.7.1 installed from repository
>>
>> /etc/nut/ups.conf
>> [HPR1500]
>> driver=usbhid-ups
>> port=auto
>>
>> After dealing hours with this, hope this will help some :
>>
>> rename udev rule to higher priority and move it to its right 
>> location, reload
>> udev rules
>> mv /lib/udev/rules.d/52-nut-usbups.rules 
>> /lib/udev/rules.d/62-nut-usbups.rules
>> cp /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/
>> udevadm control --reload-rules
>> udevadm trigger
>> reboot server to be sure everything is OK
>
> what was the issue before that?
Unable to connect to UPS via upsc>
> [cuuut]
>
>> ups.serial: 3C80341001
>
> if you put that in the ups.conf definition, would it have made it 
> detect it without the issues above?I didn't know the serial as I couldn't connect to UPS via
upsc>
>
> [HPR1500]
> driver=usbhid-ups
> port=auto
> serial = 3C80341001
>
>
>
> JonB

Nicolas

2017-Apr-18 21:23 UTC

head link

[Nut-upsuser] HP R1500 G2 USB on Ubuntu [HCL]

On 12/04/2017 23:41, Charles Lepple wrote:> On Apr 12, 2017, at 3:23 AM, me at electronico.nc wrote:
>> Hello,
>>
>> Control HP R1500 G2 with nut via USB.
>>
>> Ubuntu 14.04.5 LTS (GNU/Linux 4.4.0-72-generic x86_64)
>> nut V2.7.1 installed from repository
>>
>> /etc/nut/ups.conf
>> [HPR1500]
>> driver=usbhid-ups
>> port=auto
>>
>> After dealing hours with this, hope this will help some :
>>
>> rename udev rule to higher priority and move it to its right location,
reload udev rules
>> mv /lib/udev/rules.d/52-nut-usbups.rules
/lib/udev/rules.d/62-nut-usbups.rules
>> cp /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/
>> udevadm control --reload-rules
>> udevadm trigger
>> reboot server to be sure everything is OK
> Yes, this has been a known issue for a while:
>
>   * https://bugs.launchpad.net/ubuntu/+source/nut/+bug/1099947
>   * https://bugzilla.redhat.com/show_bug.cgi?id=488368
>   * https://github.com/networkupstools/nut/issues/140
>
>> Nicolas
>>
>> upsc HPR1500
>> Init SSL without certificate database
>> battery.charge: 100
>> battery.charge.low: 20
>> battery.charge.warning: 20
>> battery.runtime: 24171
> ^ If you add a dummy load, does this number go down to something that
correlates with the battery runtime rating?Yes : battery.runtime has decreased from 2444 to 60 while UPS was OB, 
then UPS has shut down
It displayed always 3781 while charging. Still at 3781 after battery 
charge (ups.power at 112)>
>> battery.temperature: 46.0
> ^ Seems a little high, even for charging.Ambiant temperature is around 27?C here.
battery.temperature went up to 51 at the end of OB cycle.
It has displayed 51 while charging. Now back to 46 after battery charge 
complete.>
>> battery.type: PbAc
>> battery.voltage: 41.0
>> battery.voltage.nominal: 36.0
>> device.mfr: Hewlett-Packard
>> device.model: HP R1500 G2 UPS
>> device.part: 416830-002
>> device.serial: 3Cxxxxxxxx (not usefull)
>> device.type: ups
>> driver.name: usbhid-ups
>> driver.parameter.pollfreq: 30
>> driver.parameter.pollinterval: 2
>> driver.parameter.port: auto
>> driver.version: 2.7.1
>> driver.version.data: TrippLite HID 0.81
>> driver.version.internal: 0.38
>>
> If you have time before putting this UPS into production, can you grab
upsrw and upscmd output, as mentioned here?
http://networkupstools.org/stable-hcl.html#footnotes
>
> We have the upsc output for this UPS via serial port (bcmxcp driver), but
not upsrw/upscmd: http://networkupstools.org/ddl/HP/R1500_G2.htmlHere they are:

upsrw -u admin -p adminpass HPR1500
[battery.charge.low]
Remaining battery level when UPS switches to LB (percent)
Type: STRING
Maximum length: 5
Value: 20

[input.transfer.high]
High voltage transfer point (V)
Type: STRING
Maximum length: 5
Value: 266.0

[input.transfer.low]
Low voltage transfer point (V)
Type: STRING
Maximum length: 5
Value: 194.0

[ups.delay.shutdown]
Interval to wait after shutdown with delay command (seconds)
Type: STRING
Maximum length: 10
Value: 20

[ups.delay.start]
Interval to wait before (re)starting the load (seconds)
Type: STRING
Maximum length: 10
Value: 30

upscmd -u admin -p adminpass -l HPR1500
Instant commands supported on UPS [HPR1500]:

beeper.disable - Disable the UPS beeper
beeper.enable - Enable the UPS beeper
beeper.mute - Temporarily mute the UPS beeper
beeper.off - Obsolete (use beeper.disable or beeper.mute)
beeper.on - Obsolete (use beeper.enable)
load.off - Turn off the load immediately
load.off.delay - Turn off the load with a delay (seconds)
load.on - Turn on the load immediately
load.on.delay - Turn on the load with a delay (seconds)
shutdown.reboot - Shut down the load briefly while rebooting the UPS
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test

Hope this helps.
Nicolas
>
> I would also recommend shutdown testing, but 14.04 is pretty reliable in
this area (16.04 has some issues with powerdown, IIRC).
>
>> _______________________________________________
>> Nut-upsuser mailing list
>> Nut-upsuser at lists.alioth.debian.org
>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Reasonably Related Threads

Search for more reasonably related threads

Nut upsuser - Apr 2017 - HP R1500 G2 USB on Ubuntu [HCL]

[Nut-upsuser] HP R1500 G2 USB on Ubuntu

[Nut-upsuser] HP R1500 G2 USB on Ubuntu

[Nut-upsuser] HP R1500 G2 USB on Ubuntu [HCL]

[Nut-upsuser] HP R1500 G2 USB on Ubuntu

[Nut-upsuser] HP R1500 G2 USB on Ubuntu [HCL]

Reasonably Related Threads