similar to: Problems getting reading from UPS with nut 2.0.2

Short description: when upsmon starts it logs this to /var/log/messages: Jul 11 12:35:55 sorcerer upsmon[23902]: Startup successful Jul 11 12:35:55 sorcerer upsmon[23902]: user monuser not found Near as I can tell upsd is running properly. Long description: Centos 5 system (x86_64), built nut 2.2.2 from stable source with ./configure --with-usb --with-user=nut --with-group-nut make

Running a Dell Pentium III with Solaris 8.0 for Intel installed. Have X11 and Flex installed Downloaded Wine-20010731.tar.gz and am attempting to install on the machine. Please HELP!!! thanks warren I am getting the following errors: after running make depend && make LD_LIBRARY_PATH="../../unicode:$LD_LIBRARY_PATH" ../../tools/winebuild/winebuild -fPIC -L../../dlls -o

I have a 64 bit Gentoo, with a Liebert UPS. The last NUT working version was sys-power/nut-2.4.1-r1 (I also tried sys-power/nut-2.4.3-r2 but downgraded, don't remember the reason). Anyway with the upgrade to sys-power/nut-2.6.0 I started to see this error message when I try to start upsdrv: [root at aemaeth:/etc/nut]$ /etc/init.d/upsdrv start * Starting UPS drivers ... Network UPS Tools -

[please keep the list CC'd.] On Aug 20, 2013, at 12:50 AM, Korviakov Andrey wrote: > Yes, it's my mistake: UPS used USB cable for communication, but i think that it's simple usb-com cable because nut work with liebert driver on ttyS0 port. If that is the case, I doubt that usbhid-ups will be able to retrieve any additional information. > In ups.conf i tried: > >

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically)

This patch adds support for the following ups to liebert-hid.c: $ lsusb | grep Liebert Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS Using this patch, I'm able to obtain information about the ups via upsc: $ upsc upsname battery.charge: 100 battery.runtime: 1012 battery.type: PbAc battery.voltage: 1172 battery.voltage.nominal: 12 driver.name: usbhid-ups

Attached. I also attach sample output from upsc OL & OB. I only tested it with 3-phase in/3-phase out ups. Thanks, -Spiros -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100421/1d18bd30/attachment.htm> -------------- next part -------------- battery.current: 0.00 battery.runtime: 4860

Hi all, I know there are some howto's about Powerware 5115 and Ubuntu, but I can't still get that thing working. Can someone give some light... 1. Powerware 5115, serial port (ttyS0) 2. Ubuntu 6.06.1 as LTSP-server As reference: http://gentoo-wiki.com/HOWTO_NUT http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ --- a. I try to start driver as root. root at

Hi all, I know there are some howto's about Powerware 5115 and Ubuntu, but I can't still get that thing working. Can someone give some light... 1. Powerware 5115, serial port (ttyS0) 2. Ubuntu 6.06.1 as LTSP-server As reference: http://gentoo-wiki.com/HOWTO_NUT http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ --- a. I try to start driver as root. root at

Hello. I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS And this UPS detected only with this section in ups.conf: [liebert] driver = liebert port = /dev/ttyS0 but only this variables available: device.mfr: Liebert device.model: MultiLink device.type: ups

based on r2432, i took this with "svn diff --revision HEAD liebert-esp2.c" fixes: 1) new way to initialize model, firmware etc. variables, the strok way failed because some vars had spaces. (e.g. model "Liebert NX") 2) new multipliers for: frequency, nominal power. I get correct readings now, before I had 500 Hz, and 200VA and now it's ok for me. Test with your models. 3)

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everybody, I have a Debian network server doing monitoring for three UPS devices. > MONITOR r3000xr at localhost 1 monuser xxxxxxxxxx master > MONITOR apcups01 at localhost 1 monuser xxxxxxxxx monitor-only > MONITOR apcups02 at localhost 1 monuser xxxxxxxxx monitor-only I want nut to send an email to root for every changes nut

2014-10-30 0:49 GMT-03:00 Charles Lepple <clepple at gmail.com>: > On Oct 29, 2014, at 5:08 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > >> Hi, >> >> I've bought a Liebert GXT3 UPS and I'm trying to use it with nut. I'm >> using Ubuntu 14.04, but I'm having troubles (similar to this thread >> [1]) using the

Hello, I was able to get the Vertiv/Liebert UPS (Vertiv Liebert PSA5 1500VA 900W - PSA5-1500MT120) to start working with NUT and "usbhid" driver, but would appreciate help to get it to work properly. Here's the output from the "upsc" command for a Cyberpower UPS I have: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS

On Aug 19, 2013, at 12:58 PM, Korviakov Andrey wrote: > I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. > lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS > > And this UPS detected only with this section in ups.conf: > > [liebert] > driver = liebert > port = /dev/ttyS0 I am confused.

Hi On 10/06/2014 03:04 PM, Charles Lepple wrote:> I think I see what is going on. > >???? 0.368670??? Report[buf]: (5 bytes) => 05 4e 00 48 00 >???? 0.368698??? PhyMax = 0, PhyMin = 0, LogMax = 1, LogMin = 0 >???? 0.368723??? Unit = 00000000, UnitExp = 0 >???? 0.368747??? Exponent = 0 >???? 0.368776??? Path: UPS.PowerSummary.Voltage, Type: Feature, ReportID: 0x05, Offset:

Hi Guys! I'm back and work on this driver again. First, I checked out the HEAD rev and tried the liebert driver. it gave wrong model,firmware,serial, mfr date value. caused by len variable in line 97 and after I use my ups with usb -> serial converter. these patches attached Did you try the liebert-esp2 driver in ON Battery mode ? Because If I switch my ups on battery (plugged off the

Hi all, This is my first experience with NUT. I'm trying to test a Liebert PSA 1500 UPS, connected via USB to a single PC. I have followed the instruction in the "Configuration" section of the online user manual. Everything seems to be fine, except that, when I run "upsc liebert at localhostups.status", it retuns "OB", even if the UPS is currently online. Here

On Jun 2, 2017, at 8:28 AM, zefanjas <nut at zefanjas.de> wrote: > I couldn't get the GXT4 working with usbhid-ups driver. So I need some > advise to continue to get this device working. The GXT3 seems to be > working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html). > > Here is my ups.conf > > [ups] > driver = usbhid-ups > port =

Hi all, I am trying to communicate to this Eaton Ellipse (see above) using nut from a Debian Squeeze system on Armel architecture. But have not succeeded so far. Version: Linux b3 2.6.39.4-11 #1 Tue Apr 3 21:45:12 FET 2012 armv5tel GNU/Linux Nut version is 2.4.3-1.1squeeze2 this information if from dpkg. NUT installation method:from debian package for armel. The problem is I cannot