similar to: SVN Newhidups driver

Just wanted to report that I have successfully got a Dynex DX-800U UPS functioning with the newhidups driver. This UPS appears to be made by CyberPower Systems and I believe is the same as the CPS 800AVR. --------- # upsc dynex@localhost battery.charge: 66 battery.charge.low: 10 battery.charge.warning: 20 battery.runtime: 399 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 19.7

Charles Lepple wrote: > On 8/2/06, Didrik Pinte <dpinte@itae.be> wrote: > > Le mercredi 02 ao=FBt 2006 =E0 08:08 -0400, Charles Lepple a =E9crit : > > > On 8/2/06, Didrik Pinte <dpinte@itae.be> wrote: > > > > Can you start the driver like this: "/sw/bin/newhidups -u root -DDD" > > > and paste some of the output? > > > > Here

Hi Here is a very minor patch for the bcmxcp.c driver, mainly fixing the function name used in debug statement, and at the same time fix indentation. Regards Alf Hogemark From 86c7940d0ea11b5b38a7f4518095ee2428d658c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alf=20H=C3=B8gemark?= <alf at i100.no> Date: Mon, 1 Jul 2013 21:11:40 +0200 Subject: [PATCH] bcmxcp: Fix method name outputted in

Hello All I just discoverd NUT and I'm lovin' it. I was very successful getting nut to monitor a CyberPower UPS along with having a Linux slave for a friend of mine. I've come to a snag on my personal system though. I currently have two Back-UPS XS 1200 APC UPSs, and I'm seeing notifications of low battery on both units. Now, both units are not showing 'low battery' on

Hello, I encountered a problem with my APC Smart-UPS 750, connected via USB, using newhidups. Without any reason, nut/upsmon shut down my PC: >>> Oct 13 12:57:08 echo kernel: usb 2-9.1.1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 8 ret -71 Oct 13 12:57:12 echo upsmon[5060]: UPS smart750@localhost on battery Oct 13 12:57:12 echo upsmon[5060]: UPS smart750@localhost

Okay, now that I've got NUT up and running with the newhidups driver, I can give it a quick shakedown. Most of the values look good, but are few are off. Here's what I get: elrond@foxstar:~$ upsc foxstarups@localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 3150/08/01 battery.mfr.date: 2005/03/22 battery.runtime: 1935 battery.runtime.low: 120

Hello NUT-UPSUSERS, I would just like to try and help other and indicate that I was able to use the development trunk and get the Tripp Lite OMNI1000LCD UPS (USB) working with the newhidups drivers on Gentoo Linux. The one that is currently available at many local Costco stores and online. In case others need to replicate, I've attempted to document my steps over here.

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

Hi Peter, I got all your patches and applied them, and I wanted to say kudos for a great job done. This is the output of upsc that I'm getting right now. I had the same issue when using any cvs version (from two weeks ago) that made my UPS go into a state where it wasn't functioning normally (checking the kernel log shows that it cannot be connected and I had around a page of DEVFS_USB

I was looking at how other drivers deal with outlet collections, and I noticed some differences between newhidups in 2.0.4 (from Debian's 2.0.4-2.3) and the SVN trunk (rev 723) on an Evolution. Full diff is below, but here are the highlights: * MGE HID 0.9 vs 1.0 * outlet.#.switch seems to have moved to the commands outlet.#.load.{on,off} Then I found this in the ChangeLog: * fix

I am having an issue running NUT and using an TrippLite OMNI900LCD. When I run ./upsdrvctl start I get : [player@V0002-S002 bin]$./upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0) Detected a UPS: Tripp Lite /TRIPP LITE UPS Using subdriver: TrippLite HID 0.1 (experimental) dstate_setflags: base variable

Hi, I am using the NUT Software 2.7.4 (Ubuntu Repository) on Ubuntu 18.04. Configuring a UPS with the snmp-ups driver and overriding the battery.runtime.low variable leads to following warnung/error: Sep 23 11:10:08 hostname snmp-ups[27115]: dstate_setflags: base variable (battery.runtime.low) is immutable Default for battery.runtime.low is 180 seconds. My idea is to increase the value to

Hi Charles and Jonathan, I am going through my over 300 unread NUT messages, and I just discovered this one from mid-December. At the time, I was trying to clean up the tripplite subdriver of newhidups, but never got the information I needed. I have enabled this driver now, but it is marked "experimental". The driver is still incomplete, in the sense that there are many unmapped device

Best fortress support was understandably dropped, but we still use them, and someone else may want the driver I ported to nut-2.0. We also often attach the serial cable from a UPS to a network terminal server, since servers these days don't come with very many serial ports. (They call them "legacy" ports.) I submitted a patch to support these for nut-1.x, and it was rejected

I just got NUT 2.0.1 running on my Debian system at home.? I have a new CPS UPS connected via USB.? Everything is working fine, except the UPS is showing a value of 120% charged.? Any idea what causes this?? Here's the upsc output for my UPS: battery.charge: 120 battery.charge.low: 10 battery.charge.warning: 20 battery.runtime: 1320 battery.runtime.low: 300 battery.type: PbAcid

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Opti-UPS, so I

Hi there, [ http://www.contribs.org/bugzilla/show_bug.cgi?id=654 ] I just received this: Broadcast message from nut (Sat Feb 4 04:02:45 2006): UPS UPS@localhost battery is low and Feb 4 04:02:45 bigted upsmon[11532]: UPS UPS@localhost battery is low Feb 4 04:02:45 bigted wall[4032]: wall: user nut broadcasted 1 lines (34 chars) but I believe this looks o.k., except for the input voltage

Well, after our first real extended power outage, I found out that even though the UPS 1000 RM is recognized okay, it does not work properly. It never seems to see any change in UPS status. It looks very similar to the other issue I reported with the APC CyberFort 350. I never was able to get to the bottom of the CyberFort issue, but I'll bet it's the same issue as we have with the

Hi there, been using NUT for ages and recently upgraded to a new server; while I'm waiting for a USB->Serial adapter for Solaris to arrive, I thought I'd play with the newhidups, as the APC UPS I have has a USB port and the new server doesn't have a serial port.... I've got Solaris 10 & newhidups working with the ugen driver up to a point, and that is a read