similar to: liebert GXT2-6000RT230

hello, i've got a problem with the notifycmd here is a part of my upsmon.conf : NOTIFYCMD /usr/local/ups/bin/nut_notify NOTIFYMSG ONLINE "UPS %s is getting line power" NOTIFYMSG ONBATT "UPS %s is on battery" NOTIFYMSG REPLBATT "The UPS %s battery is bad and needs to be replaced" NOTIFYMSG LOWBATT "UPS %s is being shutdown by the master" NOTIFYMSG FSD

hello i've got a problem with the "message command "option here is my config in smb.conf message command = /usr/local/samba/var/popup/get_popup "%f" "%t" "%s" "%I" & and the get_popup script date=`date +%d-%m-%Y` heure=`date +%H:%M` machine=$1 destinataire=$2 message=`cat $3` ip=$4 infos=`/usr/local/samba/bin/nmblookup -A $ip | grep

hello in first i made a test with a single machine with samba and ldap authentication, everything works fine. my qestion is the following : we have 2 samba server (pdc 2domains), one for the teachers population, and another for the students/teachers population. i dont know how to do to make it works with an ldap authentication. how to "tell" to ldap that the user "teacher1"

hello, i'm looking for a script to launch upsdrvctl, upsd and upsmon. i dont find anything for a mandrake. does anybody have this kind of script thank you -- ---------------------------------------------------- Pascal Legrand *IUT de Chartres* - _Service Informatique_ ---------------------------------------------------- 1, place Roger Joly 28000 Chartres Tel : 02 37 91 83 36 - Fax: 02 37

Hello, i've got a problem on lenny with tftpd-hpa When i launch it from /etc/init.d/tftpd-hpa start, there is no pidfile created. what is the way to get it ? thank you -- --------------------------------------------------------------- Pascal Legrand *IUT de Chartres* - _Service Informatique_ --------------------------------------------------------------- 1, place Roger Joly 28000 Chartres

Hello , in first sorry for my poor english i've got some questions - I wanted to know in which measure it was possible for a user to change his password on several servers from Windows 2000 I explain: the toto user authenticates on serveur1 domaine1 (his machine, Windows 2000 is thus integrated in domaine1.) but this user has access to resources situated on serveur2 How can he

Bonjour, je reviens ? l'attaque avec mes probl?mes d'accents sous samba. Depuis la mise ? jour de mes serveurs (mandrake 10 samba 3.0.2a), j'ai des probl?mes avec les fichiers enregistr?s par les utilisateurs. Mon fichier de conf samba ne comporte pas les lignes suivantes : dos charset = cp850 display charset = cp850 unix charset = ISO8859-15 d'ailleurs je suis bien embarrass?

hello, in first sorry for my poor english i use this script to test if a user is already connected. #!/bin/bash resultat=$(/usr/local/samba/bin/net status sessions |grep $1 | awk '{print$2}') if [ "X${resultat}" == X ]; then exit 0 else exit 1 fi in the smb.conf i add these lines : [home] root preexec = /usr/local/samba/bin/check-session %u root preexec close = yes

Good Day, I was wondering what the status was on support for the Liebert GXT2 family of UPS units? I've noted that the contact closure mode is supported along with experimental support for the 3000VA/230v model which I assume is the serial 'smart' signaling? I have several GXT2-1500's which I'm interested in getting supported in Linux and, as I have access to both the USB

Hi guys, I wrote for Arnaud that I tested the liebertgxt2 driver in 2.4.3. I compare output of Richard's code, Spiros code and nut 2.4.3. Output of Richard and Spiros codes was same and right. Output of Liebertgxt2 driver isn't. Examples: Our UPS : Liebert GXT2-1000RT230 Model Name,Firmware version,SN,date of manufactured values was right. Fields

Hi All, Attached is a patch against nut-2.4.1 that adds a driver for the ESP2 protocol, as used by the serial port found on the Liebert GXT2. This driver is mostly based on: http://www.csc.liv.ac.uk/~greg/projects/liebertserial with additional bit field information from Spiros Ioannou. liebert.c at the above url has been tested by a few people to return the correct status data. Besides me,

I am working with three Liebert GXT2 UPSes connected via local TCP/IP under Linux 2.6.25.1 and getting a series of messages. First, at start, the drivers complains that the Liebert apparently extract information from certain MIBs in the ietf MIB file.... Network UPS Tools - UPS driver controller 2.2.2 Network UPS Tools - Multi-MIBS SNMP UPS driver 0.421 (2.2.2) Warning: This is an experimental

Is this the best place to get into contact with the snmp-ups driver developers? I am trying to get the snmp-ups driver to work with a Liebert GXT2 UPS, and it works for knowing when it goes on battery and such, but when it comes to shutting down the Liebert UPS, it doesn't work. Any suggestions or docs that I need to read? -- Ronald Reed Manager of Computer Operations ARM SGP ACRF Site

based on r2432, i took this with "svn diff --revision HEAD liebert-esp2.c" fixes: 1) new way to initialize model, firmware etc. variables, the strok way failed because some vars had spaces. (e.g. model "Liebert NX") 2) new multipliers for: frequency, nominal power. I get correct readings now, before I had 500 Hz, and 200VA and now it's ok for me. Test with your models. 3)

Hello, i've got a problem with boot pxe on pc, all my pc works fine except in a room where all the same pc doesnt works : my configuration (dhcp tftp etc...) works fine also here is a part of my tftpboot directory ghost/ memdisk menu.c32 pxelinux.0 pxelinux.cfg/ ./ghost: ghost288.IMA ghost_geii_101.IMA ghost_MM.IMA ghost_MM.IMA.old ./pxelinux.cfg: default here is a part of my default

Good morning, I just had the chance this morning to get my linux box tied into our network and talking to the UPS. I can now confirm that in NUT v2.4.3 snmp-ups (ietf) works with the Liebert Intellislot Web Card for the GXT2 family of UPS'. upsc output: tux ~ # upsc workups at localhost battery.charge: 100.00 battery.runtime: 2760.00 battery.runtime.low: 5 battery.voltage: 54.60 device.mfr:

Good morning, I just had the chance this morning to get my linux box tied into our network and talking to the UPS. I can now confirm that in NUT v2.4.3 snmp-ups (ietf) works with the Liebert Intellislot Web Card for the GXT2 family of UPS'. upsc output: tux ~ # upsc workups at localhost battery.charge: 100.00 battery.runtime: 2760.00 battery.runtime.low: 5 battery.voltage: 54.60 device.mfr:

hi, we working together with robert to make liebert ups with nut. there was a good revision 2431 which gives a good result for us. this revision call the driver gxt2. after that you change the name to esp2. unfortunately this version (and the current head too) contains the same bug what was previously fixed in the gxt2 branch. it'd be useful to port the fixes to the new esp2 branch too. the

2009/10/19 Jobbagy Robert > |Hi Arnaud! Hi Robert, > I'm a hungarian developer and I need make a linux driver for this ups: > "Liebert" ? ? ? "ups" ? "5" ? ? "UPStation GXT2" ? ? ? ?"contact-closure > cable" "liebert" (I copied it from your previous mail) > So please help me,where should I start it ? > > |Thank

Hi, I have a Liebert GXT2-1000RT230 UPS that is connected to my server using a serial cable. I have no idea to what port exactly it is connected so my first question is: how do I find out what /dev/tty** should I use? Do I need to install a device driver for it? Where do I find it? What should I use and how do I do so the server shuts down if the battery level is low? Yes, I'm a newby,