similar to: Eaton USB PowerWare 3105

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) debug level is

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001

Hi I'm having a problem with the bcmxcp_usb driver FSD command: everything seems to work apart from: upsmon -c fsd Environment: Ubuntu 7.04, nut 2.0.5-1, nut-usb 2.0.5-1, Powerware 3105 UPS. upsd appears to send the FSD command to the UPS, upsmon then runs my NOTIFYCMD (which halts my PC) but the UPS just doesn't turn off. Here are the /var/log/daemon.log entries: Jul 24 23:13:16

Hi I have PW 5115 500 UPS which has both RS232 and USB connectors. bcmxcp driver works fine with serial connection but bcmxcp_usb does not with USB one. After some USB sniffing on windows box I've found that PW5115 communicates in other way than supposed in driver. Applying attached patch makes driver to work properly. System: FreeBSD 6.2 but ugen driver needs patching in order to respect

Hi Does there exist any work on getting the powerware driver to work with USB devices under freebsd? I have tryed with the usb enabled newhidups driver for freebsd but it does not seem to work. $ newhidups -a newhid -DD Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2) debug level is '2' found 0 (-1) No USB/HID UPS found //erlis -------------- next part -------------- An HTML

I ordered some Powerware 3105 devices for Linux workstations. These devices only have an USB interface. I understood too late that support for Powerware devices is only available for the serial interface. Since the protocols over serial and USB seem to be identical, it was not too difficult to modify the bcmxcp driver to support USB. The new and changed files can be found here:

Hi, I have an UPS Powerware 5110 ( usb connection ), on Linux OS is Debian 4.0 The /etc/ups.conf file setting is: [myups] driver = bcmxcp_usb port = auto desc = "UPS Powerware 5110 1500 VA" When the daemon starts it displays the following message: "Starting Network UPS Tools: (upsdrvctl failed)." Looking at /var/log/syslog I found the following line

Hi, Does anyone know how to make NUT works with Powerware 5125? I already tried serial communication (genericups and bcmxcp) and USB (usbhid-ups and bcmxcp_usb), but without success. I'm using the latest version of NUT (2.6.5) under Debian amd64. Can anyone help me? Thanks. Daniel -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, Have a strange behaviour that I don't know how to debug. This is when I use the Eaton PW5125 ups. I have it connected And running in standby. Starting up the drivers (pw3105 and pw5125) and they run. Start up the upsd and can read info from both of them. The 3105 is supplying the computer and the 5125 have a dummy load. The 5125 is showing that it is off line. Now when I hit the on

Hi all, I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and configured nut appropriately. The cgi scripts are working fine, but on upsstats.cgi, the Batter, UPS Temp and Battery Runtime fields are all blank - and there are no entries for these values in the 'All data' tree. I've checked the man page for bcmxcp_usb

Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. - Tim On 02/12/2014 06:46 PM, Greg Vickers wrote: > Hi all, > > I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and > configured nut

Hi, I am wanting to use NUT to connect to an Eaton Powerware 5110 UPS using USB to connect. - I am using NUT 2.0.2 - I have compiled it with USB support - I can see that the UPS is registered as connecting in /var/log/messages eg usb 3-1: USB disconnect, address 3 usb 3-2: new low speed USB device using uhci_hcd and address 4 But I don't know how to progress from here.

On 13/02/14 12:16, Charles Lepple wrote: > On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > >> Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. I ran the new driver (see below) and with -DDDD it throws out

On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. Tim, is this the issue you mentioned on 2014-02-02 with blocks 0x9 and 0x13? I'll reply to that email. > On

> On February 14, 2014 11:22:22 PM CST, Greg Vickers <daehenoc at iinet.net.au> wrote: >> I ran the new driver (see below) and with -DDDD it throws out tons of >> never ending information, what am I looking for? :) > On Feb 15, 2014, at 2:57 AM, Tim Dawson wrote: > The driver will poll the UPS for what variables it supports when it starts, and then go into a polling

The driver will poll the UPS for what variables it supports when it starts, and then go into a polling loop. Look for a section defining the meter map, and you should see the result, as well as the raw data. You can get the comm spec for XCP from the nut site if you want to delve deeper. I'd give more specifics, but am out of town and only working from memory at the moment . . . - Tim On

Hi there, all I have subj UPS, connected by USB. ups.conf: === [eaton] driver = bcmxcp_usb port = auto desc = "Eaton Powerware 9120 3000" override.battery.charge.low = 91 === upsmon.conf: === NOTIFYCMD /sbin/upssched NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC === upssched.conf === CMDSCRIPT /etc/nut/ups.sh AT LOWBATT * START-TIMER battery 3 AT ONLINE *

Hi, just wanted to provide a upsc dump for an Eaton/Powerware 5115 rack mount unit. This was on a CentOS 7.3 machine with following packages installed: nut-client-2.7.2-3.el7.x86_64 nut-2.7.2-3.el7.x86_64 nut-cgi-2.7.2-3.el7.x86_64 $ upsc eaton5115 ambient.temperature: 43 ambient.temperature.high: 75 battery.charge: 100 battery.runtime: 24171 battery.voltage: 40.96 device.mfr: Eaton

Hi, OS: FreeBSD 9.0-RELEASE NUT version: nut-2.6.5_1 (installed from ports) UPS: Eaton powerware 5110 Can you help me with this device, please? [root at mail /usr/local/etc/nut]# /usr/local/libexec/nut/usbhid-ups -DDDD -a eaton Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 debug level is '4' 0.001239 upsdrv_initups... 0.001958

Hi On http://nutwiki.kanonbra.com/wiki/Category:Eaton_Powerware_5110 you can see what is reported. The unreleased part refers to v2.7.1, which is now released. Alf Greg Vickers <daehenoc at iinet.net.au>: >Hi all, > >I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and >configured nut appropriately. The cgi scripts are working fine, but on