Hi all, Have a strange behaviour that I don't know how to debug. This is when I use the Eaton PW5125 ups. I have it connected And running in standby. Starting up the drivers (pw3105 and pw5125) and they run. Start up the upsd and can read info from both of them. The 3105 is supplying the computer and the 5125 have a dummy load. The 5125 is showing that it is off line. Now when I hit the on line button on the ups, the upsd segfaults. The driver is still running. And I only have to restart the upsd to get the data from the ups. Running the driver in debug mode and pushing the switch give no change then the outlet state is shifting from off to pending on to on. can not see any garbage or extra data comming from the driver. This is what i get when running upsd in debug. ---------------------------- Pinging UPS [pw3105] mainloop: polling 3 filedescriptors Got PONG from UPS [pw3105] mainloop: polling 3 filedescriptors mainloop: no data available Pinging UPS [pw5125] mainloop: polling 3 filedescriptors Got PONG from UPS [pw5125] mainloop: polling 3 filedescriptors mainloop: no data available mainloop: polling 3 filedescriptors Pinging UPS [pw3105] mainloop: polling 3 filedescriptors Got PONG from UPS [pw3105] mainloop: polling 3 filedescriptors Segmenteringsfel <--------------------------this mean segfault ----------------------------- From /var/log/messages Dec 21 17:32:50 sm6fhx upsd[21366]: segfault at 0 ip 0000000000408b6d sp 00007fff50a23120 error 4 in upsd[400000+e000] Any idea how to debug this. Arnaud I think you have a 5125, can you test this, so it's not only my setup that have this. Regards /Kjell
On Sun, Dec 21, 2008 at 11:57 AM, Kjell Claesson <kjell.claesson at epost.tidanet.se> wrote:> Hi all, > > Have a strange behaviour that I don't know how to debug. > This is when I use the Eaton PW5125 ups. I have it connected > And running in standby. > > Starting up the drivers (pw3105 and pw5125) and they run. > Start up the upsd and can read info from both of them. The 3105 is > supplying the computer and the 5125 have a dummy load.Is this a released version of NUT, or from SVN? (If SVN, which revision?)> From /var/log/messages > Dec 21 17:32:50 sm6fhx upsd[21366]: segfault at 0 ip 0000000000408b6d spIf your upsd still has debugging symbols, you can try running 'addr2line -e /path/to/upsd 408b6d' -- - Charles Lepple