similar to: Tripp Lite OMNI900LCD

I am having an issue running NUT and using an TrippLite OMNI900LCD. When I run ./upsdrvctl start I get : [player@V0002-S002 bin]$./upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0) Detected a UPS: Tripp Lite /TRIPP LITE UPS Using subdriver: TrippLite HID 0.1 (experimental) dstate_setflags: base variable

Hi Patrick, in February, you tried to post the below message to the nut-upsuser list, but the post was rejected because you were not subscribed to the list. Unfortunately, you did not subscribe and re-post it. Anyway, I have been working on Tripp-Lite support for newhidups recently, and I wonder if you have any feedback. Did you ever get this device to work? >From the information you sent,

Thanks Kjell for the help with the build problem. Thanks for your input, too, Charles. Now I have a new problem that I think has already been solved. I have Tripp Lite Smart1000LCD UPS (usb), but I can't get the newhidups driver to communicate correctly. I found a thread on the development list from last December where Jonathan Freedman described had a problem with this UPS in a thread

At the company I work for, we are using many TrippLite OMNI900LCD UPSs and are having difficulty setting the lower transfer threshold voltage. On our other model, the Eaton MGE-3S550, this can be set using upsrw to set the input.transfer.lowsetting, but on the Omni900, this option is not available. In our testing, it defaults to ~95v but we want to set it to 84v. More info: - OS = OpenSuse 13.1 -

Hello all; I am new to this list. Recently we have been getting these cheap new Tripp-Lite "LCD" style UPS'es around here, and I was surprised to find the lack of Linux support. The model name is OMNI650LCD. Anyway, I tried the tripplite_usb driver and got a message instructing me to contact this mailing list. I might try to fix the problem myself, if I was more familiar with the

Greetings, Any suggestions? I think I'm close but I can't quite get tripplite_usb to talk to my OMNI1000LCD. I'm new to NUT and couldn't find an answer using Google. With any luck, I've simply missed the obvious. The system I'm using, kaylee, is a debian stable system with some debian testing installed and a 2.6.15.4 kernel. I downloaded NUT 2.0.3 and built it from

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD

On 9/22/2020 10:01 AM, David Zomaya wrote: > Can you send me the serial number (at least 1st 12 characters, see: https://www.tripplite.com/support/identify-products) and lsusb -v output for the UPS? > > Thank you, > David Zomaya > Tripp Lite > Oh cool, someone from Tripplite. Serial number 3021EYOSM886901200. lsusb -v for just the Tripplite: Bus 003 Device 057: ID 09ae:2012

Bonjour, Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous) DaneZ _____ From: DaneZ [mailto:david.guillotte@danez.no-ip.org] To: arnaud.quette@mgeups.com Sent: Sat, 08 Jul 2006 23:24:06 +0200 Subject: Fw: INFOSEC 500 XP en USB _____ Bonjour Arnaud, Je me

I used a brazilian UPS from "TS-Shara" which uses the megatec serial protocol and it works perfectly. Now I have another one from the same brand (TS-Shara) and it uses a USB cable. I found the following: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0483 ProdID=0035 Rev= 2.00 S:

Hi I have a Tripp lite smartusb550 using fedora 3 (2.6.12-1.1381_FC3smp). Managed to establish communication with the ups using the tripplite_usb driver but get the following errors Any help to make it work will be appreciated cheers Julio -----------------------------------------------------------------------------------------------------------------------------------------------------

We have multiple TrippLite Omni900LCD UPS. There are a couple pieces of equipment connected to each UPS. I would like to connect the UPSs to one computer through USB which would shutdown the appropriate equipment based on events monitored by upsmon using upssched. I've configured NUT using usbhid-ups driver and compiled/installed NUT. I've done some testing and it seems to work.

Has anyone gotten this model of tripp-lite to work? sudo /usr/local/bin/upsdrvctl -DDDDD -u root start Network UPS Tools - UPS driver controller 2.0.5 Starting UPS: tripplite exec: /usr/local/bin/tripplite_usb -a tripplite Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.7 (2.0.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: TRIPP

Here is what I get: # usbconfig -u 1 -a 3 dump_curr_config_desc ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0022 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes =

I've having trouble understanding the NUT compatibility page. Is it compatible with the OMNISMART300? Or the OMNI900LCD? The compatibility page said for instance SMART550 -- tripplite_usb SmartUPS -- tripplite OMNI650LCD -- usbhid_ups so I'm not sure if an OMNISMART300 is like a Smart, or a SMART, or an OMNI, or even if it's supported at all. Thanks in advance for any help!

Some of my messages never went through since I hit a message size limit. I'm resending them in the hopes they are under the limit. Charles, The lsusb command did not trigger a disconnect. The output of that command is below. I ran "usbhid-ups -a upsunit -DDD &> output.log" and I have attached the /var/log/messages and output.log to this email. Before running this test

I looked through the faq, but couldn't find an answer to this. I'm trying to configure nut-2.0.4-26 on SuSE linux 10.2. In ups.conf, I have [myups] driver = belkinunv port = /dev/undefined desc = "Local UPS" I'm trying to find out what the port should be set to. lsusb shows: Bus 001 Device 005: ID 050d:0980 Belkin Components Device Descriptor: bLength

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

Ok, so I have made some progress that seems to suggest the initial “fix” I stumbled upon isn’t required. I haven’t yet worked backwards to figure out reasons why our customers have had similar complaints or solve the problem on the CentOS VM yet, but that is on the todo list. I am hoping it ends up just being not enabling the service on startup, but I can’t say that explains away all the symptoms

Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType =