similar to: F6C1500-TW-RK

For the record, I was able to get the following working: Device: Belkin F6C1500-TW-RK Driver: belkin I tried the "belkinunv", which I use for my F6C1100-UNV, but it didn't work. At least there was a driver that worked! :-) Feel free to add it to the list of "tested" configs. Thanks, Dave ---------------------------------------------------------- Are Your Friends

Hello, I'm using nut to control a Belkin F6C1500-TW-RK ups (vendor ID 050d, product ID 0751). I'm using the belkin driver and a serial connection for communications. The host computer is running Debian. I have things configured such that both my computer and the ups shut off when the battery level reaches a critical level, and everything seems to work fine up to this point. My problem

Hello, I'm using nut to control a Belkin F6C1500-TW-RK ups (vendor ID 050d, product ID 0751). I'm using the belkin driver and a serial connection for communications. The host computer is running Debian. I have things configured such that both my computer and the ups shut off when the battery level reaches a critical level, and everything seems to work fine up to this point. My problem

Hi, just wanted to let you know that I have two belkin F6C-1250-TW-RK UPSes which work just fine with nut. I made this small patch so that nut recognizes the usb device id. Thanks, ~David -------------- next part -------------- A non-text attachment was scrubbed... Name: nut-2.4.1-belkin-1250.patch Type: text/x-patch Size: 1205 bytes Desc: not available URL:

Hello, I have encountered problems trying to set up nut to work with APC BackUps Pro CS connected over USB to an AMD64 machine running Debian. While apcupsd works fine with that device, whenever I start upsd I get the following messages in syslog: hidups[23159]: Startup successful upsd[23160]: Connected to UPS [apc1]: hidups-hiddev0 upsd[23161]: Startup successful hidups[23159]: Unhandled event:

Hi, I'm new to nut, just installed it. I configured it using the hidups driver to work with my APC BackUPS: # upsc apc350@localhost battery.charge: 100 battery.runtime: 885 battery.voltage: 13.5 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.delay.shutdown: -1 ups.delay.start: 0 ups.load: 660 ups.mfr: American Power Conversion ups.model: Back-UPS CS 350

O.S. Ubuntu 10.10, Maverick Meerkat 32 bit. NUT 2.4.3-1ubuntu5, package installed Belkin F6C1500-TW-RK I am having trouble starting uspd whenever I add a client from my lan to uspd.conf: LISTEN 127.0.0.1 3493 LISTEN 192.168.36.106 3493 naknight at nak-server:~$ sudo upsd -DDDD Network UPS Tools upsd 2.4.3 0.000000 listen_add: added 127.0.0.1:3493 0.000093 listen_add:

Hi! I've got a Mandrake 2006.0 machine and a APC Back-UPS Pro 500/1000/1500 (from lsusb). The Mandrake package version of nut is 2.0.1 and hidups actually detects the UPS, however I get loads of these: Sep 12 18:26:11 vader hidups[7658]: Ignoring x86 page event 0xff860080 (0) Sep 12 18:26:11 vader hidups[7658]: Unhandled event: 0x840058 (6) Sep 12 18:26:11 vader hidups[7658]: Unhandled

I'd like to submit a patch to the 'hidups' driver. I'm a bit new to open-source development model, so I hope I'm not committing a faux paus by just posting it here. I did verify that the problem still exists (by source code inspection) in the latest dev snapshot, which is nut-2.0.3-pre2. I'm using nut-2.0.2 myself. The problem is when I'm connecting to my APC

I just installed NUT and my UPS is an APC Back-UPS ES 500. I looked in the list of drivers and found APC Back-UPS ES 350 listed in "drivers.txt" -- that list said I should use either the newhidups or hidups driver. I looked in the installation and I found headers and c files to create these drivers (I think), but in /usr/local/ups/bin there is no driver named, "newhidups or

I Seem to have made some progress in getting nut-2.0.5 installed, but hidups still has a version number of 0.13. First is hidups 0.13 the correct version? if not how do I find the correct version. Second if my Geek Squad GS1285U UPS is not supported how do I proceed. I have been a programmer for 35 years(mostly high level computer aided design), written code in 20 some languages, am retired

Hi LLVM community, I'd like to ask a question regarding the behavior of llvm-link: My code contains Classes which are structurally equivalent but they are totally unrelated and distinct on a c++ point of view. However, if the compiled IR gets processed by llvm-link, these types are merged together. My question is: Is this expected behavior or a bug? To explain it more in detail, a reduced

I managed to configure Dovecot to use a local OpenLDAP server to authenticate clients, without using SSL. However, I would rather that LDAP is accessed using SSL, but I cannot get Dovecot to connect. All that I did was change "uris" to "ldaps://localhost", and this appears in the maillog: Mar 18 12:53:00 server dovecot: Dovecot v1.0.rc15 starting up Mar 18 12:53:01 server

Nut shut down a machine last night when there was no power outage. When I came in this morning, the UPS was turned off, but it turned on cleanly and passed its self-test. The battery was at 62% when I first checked it, and it's up to 63% now, about 20 minutes later. The UPS is a Tripp-Lite AVR550U. I'm running nut version 2.0.3. I expect to be told to update to a newer version and to

2006/1/13, Paul Mogren <fkamogee@yahoo.com>: > > This thread is FYI. I don't need any help here. > no, but some details for those who will read it, maybe ;-) I have SUSE 10.0 and an MGE Ellipse. I installed the NUT package from MGE. > > 1) The generated ups.conf pointed to a bad location: > /dev//dev/input/event0 > who generated that ? it seems like an old hiddev

Hi list, After reading rsync docu and doing online search, I still failed to find a simple solution for following problem: The goal is to sync two directories using rsync without running the rsync daemon on one of the two hosts. The standard shell sync does not work because of the network topology: Ssh connect to SRC-Host ^ Base host (with ssh keys) v Ssh connect to bridge

I am forwarding the below message. Does anybody on this list know anything about this problem? Petr - perhaps you should switch from the "hidups" to the "newhidups" driver. I believe it supported the APC Back UPS even in NUT 2.0.2, and it certainly does so in the Development version that you can get from CVS (see the NUT download page). Also, could you post the output of

Hello Linas, > Just wanted to inform You (for the compatibility list), that HP R/T2200 works perfectly with the hidups driver. Thank You very much for NUT! :) > > # upsc hp at localhost > battery.charge: 100 > battery.chemistry: PbAC > battery.voltage: 22.7 > driver.name: hidups > driver.parameter.port: /dev/usb/hiddev0 > driver.version: 2.0.5 > ups.delay.shutdown:

Hi! I am trying to run CygWin, the Win32 version of gcc and friends, under wine. Why am I not running gcc directly? It's a long story. Anyway: I installed cygwin OK, but when I go to c:\cygwin\bin and do a 'wine bash.exe', something _seems_ to flash up on the screen and I am notified that Wine exited with a successful status. Is there a way to make bash stick around so that I

Hi, I noticed your message in the digest and I'm having the same problem. I can get into my Win98 machine use smbclient, but I want to mount the drive in /mnt. But when I go to do that, it whines about client names and the like. Have you managed to do it? If so, can you let me know how as I'm almost tearing my hair out here! - Stuart Luscombe