Hi Marek,
you should use newhidups, not hidups. -- Peter
Marek Szuba wrote:>
> Hello,
>
> I have encountered problems trying to set up nut to work with APC BackUps
Pro CS connected over USB to an AMD64 machine running Debian. While apcupsd
works fine with that device, whenever I start upsd I get the following messages
in syslog:
>
> hidups[23159]: Startup successful
> upsd[23160]: Connected to UPS [apc1]: hidups-hiddev0
> upsd[23161]: Startup successful
> hidups[23159]: Unhandled event: 0x8500d1 (1)
> hidups[23159]: Unhandled event: 0x840068 (0)
> hidups[23159]: Unhandled event: 0x850043 (0)
> hidups[23159]: Unhandled event: 0x840073 (0)
> hidups[23159]: Unhandled event: 0x85004b (0)
> hidups[23159]: Unhandled event: 0x840065 (0)
> hidups[23159]: Unhandled event: 0x8500db (0)
> hidups[23159]: Ignoring x86 page event 0xff860080 (0)
> hidups[23159]: Unhandled event: 0x840058 (6)
> hidups[23159]: Unhandled event: 0x8500d1 (1)
> hidups[23159]: Unhandled event: 0x840068 (0)
> hidups[23159]: Unhandled event: 0x850043 (0)
> hidups[23159]: Unhandled event: 0x840073 (0)
> hidups[23159]: Unhandled event: 0x85004b (0)
> hidups[23159]: Unhandled event: 0x840065 (0)
> hidups[23159]: Unhandled event: 0x8500db (0)
> hidups[23159]: Ignoring x86 page event 0xff860080 (0)
> [five seconds pass...]
> hidups[23159]: Unhandled event: 0x8500d1 (1)
> hidups[23159]: Unhandled event: 0x840068 (0)
> hidups[23159]: Unhandled event: 0x850043 (0)
> hidups[23159]: Unhandled event: 0x840073 (0)
> hidups[23159]: Unhandled event: 0x85004b (0)
> hidups[23159]: Unhandled event: 0x840065 (0)
> hidups[23159]: Unhandled event: 0x8500db (0)
> hidups[23159]: Ignoring x86 page event 0xff860080 (0)
> hidups[23159]: Unhandled event: 0x840058 (6)
> hidups[23159]: Unhandled event: 0x8500d1 (1)
> hidups[23159]: Unhandled event: 0x840068 (0)
> hidups[23159]: Unhandled event: 0x850043 (0)
> hidups[23159]: Unhandled event: 0x840073 (0)
> hidups[23159]: Unhandled event: 0x85004b (0)
> hidups[23159]: Unhandled event: 0x840065 (0)
> hidups[23159]: Unhandled event: 0x8500db (0)
> hidups[23159]: Ignoring x86 page event 0xff860080 (0)
> [and so on]
>
> I've observed this behaviour with several versions of nut, from the one
used by sarge, i.e. 2.0.1, up to and including the version available at present
in the testing branch, i.e. 2.0.4.
>
> Any ideas? If you need more information, please let me know.
>
> Regards,
> --
> MS
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser@lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
>