similar to: upsd looking at wrong filename for socket?

I'm having problems creating a UPS connection to my Tripp Lite UPS System: Ubuntu 8.04.2 Nut 2.4.1 freshly compiled from source. When I do upsdrvctl start everything appears to work and I get :Detected a UPS: TRIPP LITE/TRIPP LITE UPS Using OMNIVS 2001 protocol (2001) Unit ID not retrieved (not available on all models) Attached to Tripp Lite UPS But

The Compatibility page lists the OMNIVS1000 as supported, but the tripplite_usb driver doesn't seem to recognize my UPS. Below is the debug dump from attempting to load the driver. I am using the nut package from Debian: 2.2.1-2.1 and I was wondering if this was a known issue? maroon:/lib/nut# /lib/nut/tripplite_usb -DDDDD -a usbups Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver

I have added preliminary support for the TrippLite protocol number 2001 into tripplite_usb.c. The attached file is supplied as a patch against today's SVN. This patch adds support for TrippLite SMART550USB and some Omni models. Tested are On Line, On Battery, Battery Good, and Battery Bad indication. Everything else seems to work, but this UPS is attached to a critical system, and I can

> > > 2.117586 send_cmd(msg_len=2, type='G') > > 3.219418 libusb_get_interrupt: Connection timed out > > 3.219474 libusb_get_interrupt() returned 0 instead of 8 while > sending 3a 47 b8 0d 00 00 00 00 '.G......' > > 4.219593 libusb_get_interrupt: Connection timed out > > 4.219661 libusb_get_interrupt() returned

Has anyone gotten this model of tripp-lite to work? sudo /usr/local/bin/upsdrvctl -DDDDD -u root start Network UPS Tools - UPS driver controller 2.0.5 Starting UPS: tripplite exec: /usr/local/bin/tripplite_usb -a tripplite Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.7 (2.0.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: TRIPP

Hello, I am looking for good instructions on how to configure NUT to receive SNMP Trap signals and how to shutdown a server. My setup is: NUT: version 2.7.1-1ubuntu1, from package OS: Ubuntu 14.04.5 LTS UPS: Tripp Lite SMART3000RM2U The only thing I was able to understand from the documentation is to an entry in ups.conf: [tripplite-pa3] driver = snmp-ups port =

Please ignore the previous message as I sent it before it was complete. Hello, I have a Tripplite SMART2200VS that isn't being shut down when the nut master asks it to. My initial test was simply upsmon -c fsd which did cause the system to shut down, however the UPS remained on and providing power to its loads. Looking in the logs (daemon and syslog) it was not clear to me that NUT was

Hi, I'm working with svn trunk rev 815, testing tripplite_usb with this model. I haven't gotten far in my testing, but thought I'd notify the list of this error message. Is this message of any consequence, and is it worthwhile for me to continue testing prior to resolving this? I am happy to help debug any driver issues, so please let me know if I can be of assistance. My platform

He everyone, I have a Tripplite SMART700DVa using the tripplite_usb from NUT 2.5 (rev 2217) driver running in Solaris 10x86. My driver hangs when trying to connect. Once the driver sends the watchdog command ("W\0"), it can no longer receive any signals and eventually exits. The UPS responds to other watchdog commands ("W5" for example), but there doesn't seem to be

I'm trying to get a SMART2200CRMXL to work with nut, using a USB cable. tripplite_usb -a upsname returns: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. No matching USB/HID UPS found My system info: CentOS 5.5 nut installed from repo upsd version 2.2.2 TrippLite SMART2200CRMXL

Hello, I have a Tripplite SMART1500 UPS, and I'm having a little luck with the tripplite_usb driver. Only a LITTLE though. It's working better than any of the other drivers I've tried, but I'm not getting a status from it. Here's the output of upsc: battery.voltage: 0.00 battery.voltage.nominal: 36 driver.name: tripplite_usb driver.parameter.port: /dev/hiddev0

Can anyone point me to information for getting the Tripplite SMART3000RM2U to work with NUT? Our newer Tripplite units seem to work with the usbhid-ups driver, but these older ones seem to need something different. So far I have had little success getting tripplite_usb to work. [root at banyan ~]# tripplite_usb -a tripplite Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.1)

Leslie, This message is most appropriate for the NUT user list. I kept Rik Faith's and Nicholas Kain's copyright information because the tripplite_usb driver borrows heavily from the tripplite (serial) driver, but they are not responsible for the mess that I made in the USB driver. See below. On Dec 28, 2008, at 5:28 PM, Lelsie Rhorer wrote: > Gentlemen, > >

I've having trouble understanding the NUT compatibility page. Is it compatible with the OMNISMART300? Or the OMNI900LCD? The compatibility page said for instance SMART550 -- tripplite_usb SmartUPS -- tripplite OMNI650LCD -- usbhid_ups so I'm not sure if an OMNISMART300 is like a Smart, or a SMART, or an OMNI, or even if it's supported at all. Thanks in advance for any help!

Device manufacturer and name: Tripp-Lite OmniSmart500 upsc output: matt at backup:/etc$ sudo upsc tripplite battery.charge: 100 battery.test.status: Battery OK battery.voltage: 14.56 battery.voltage.nominal: 12 device.mfr: Tripp Lite device.model: OMNISMART500 device.type: ups driver.name: tripplite_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3

On Dec 16, 2008, at 10:36 AM, Bradley Feldman wrote: > Looking at the syslog, I noticed that the tripplite_usb driver > segfaulted > once it switched to battery (see below). I'm not sure whether you > still > maintain the driver or if I need to file a bug somewhere. I still have the unit in question; however, since the segfault happened inside libc, I won't be able

Hi, I'm running the latest version of NUT and with the above UPS and I keep getting the following error: "tripplite_usb[3308]: Error reading B value: Device detached? (error 0: could not claim interface 0: Device or resource busy)" The device keeps disconnecting and re-connecting until fails. I've tried to see if others are getting this - but I could not locate a

Hello List, David: I’ thanking you … :-) I’m using the tripplite_usb driver and the barcode on mine says: 9347AIOBC470902728 or 9347A10BC470902728. with pictures… https://drive.google.com/file/d/1SJWDr0g95KOD-FpbOPHUyl9bsbOKePlD/view?usp=sharing https://drive.google.com/file/d/1SFMT-GbZRcRO03gEy_7SszZ43-LYmEZM/view?usp=sharing

Hello There, I tried your advice and i don't think it works either, See the logs, " /tmp/nut# ./drivers/usbhid-ups -DDDDDD -d1 -s test -x port=auto -x vendorid=... -x productid=... -x subdriver=... Network UPS Tools - Generic HID driver 0.52 (2.8.0-2557-g81fca30b2) USB communication driver (libusb 1.0) 0.46 ?? 0.000000??? [D3] main_arg: var='port' val='auto' ??

<facepalm ;)> the ellispis "something=..." were supposed to be replaced by your device ID numbers, etc. On Sat, Sep 23, 2023, 18:26 FatGear <fatgear1 at free.fr> wrote: > Hello There, > > I tried your advice and i don't think it works either, > > See the logs, > > " > > /tmp/nut# ./drivers/usbhid-ups -DDDDDD -d1 -s test -x port=auto -x