similar to: New Belkin 550VA UPS not recognized with Nut 2.0.4?

# /lib/nut/megatec_usb -a myups Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with

I have a flash memory stick that is formated with ext3 file system. NOw, there is an application on it that I would like to copy to another memory stick. I can copy it, but when I do so, that application does not work properly (it won't start - boot problem???). Is there a tool that can copy an entire content from one flash stick to another? Thanks!!! -------------- next part --------------

Hi gang, I have the APC BR1500LCD [1] and would like to know if NUT can handle it. The compatibility list [2] does not show it but I thought that perhaps it would fit in as some other unit. Does anyone else have this unit? [1] http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BR1500LCD [2] http://www.networkupstools.org/compat/stable.html -- /jm

Hello, Information: gcc -v: gcc version 4.3.3 (Debian 4.3.3-3) os: Debian/Testing Pulled latest release from asterisk site, compiled, installed it. I have a barebones configuration: $ ls -l asterisk extensions.conf modules.conf sip.conf users.conf voicemail.conf You can see them here: http://home.comcast.net/~jpiszcz/20090418/extensions.conf

Hi all, I've not been able to find the answer to my timer problem in the faq or the archives. (or google) Basically, I can't get timers to fire. They fire ignoring the timer value, as if the timer was set to 0. I'm using the OpenFiler distribution, patched to the latest and greatest. upsmon 2.2.2 When I pull the power plug, I see the text "Im In Battery" instantly, instead

-> ups at p34 POWER ALERT on Sat Aug 25 07:40:01 EDT 2007 -> UPS belkin at localhost battery is low The last good version is 2.0.4, someone e-mailed me from this list before exactly why this happened it was about ignoring bad events from the usb-dev subsystem/kernel but I guess my question is this going to get fixed or should I stick with 2.0.4 as long as I can? Thanks. # ./usbhid-ups

Hi, I bought a Belkin Active Battery Backup UPS (http://www.belkin.com/uk/activebattery/) yesterday with a USB port and hoped it would work with nut. The device will show up in /proc/bus/usb/devices as a Cypress Semiconductor USB to Serial. It creates /dev/hiddev0 (and this disappears when the UPS is unplugged). I've tried using belkin, belkinunv, usbhid-ups and megatec_usb. I've tried

I recently bought a Belkin F6H375 UPS. It connects to the computer via USB. Searching the Internet led me to believe that the megatec_usb driver in nut supports this UPS, however I've been unable to get it to work. I have this in ups.conf: [belkinusb] driver = megatec_usb port = auto desc = "Belkin USB" Here's what happens when I try to use it: ~ #

Package: nut Version: 2.0.5-3+b1 Running: Debian Testing Arch: x86_64 BUG: (the battery is relatively new (6mos) and there have been no recent power outages) Jul 28 04:29:44 p34 upsmon[2402]: UPS belkin at localhost battery is low Jul 28 05:13:15 p34 upsmon[2402]: UPS belkin at localhost battery is low Jul 28 05:14:05 p34 upsmon[2402]: UPS belkin at localhost battery is low FIX: (go back to

Hi Team, I've been experimenting with getting the PowerShield Defender 1200VA UPS working and it appears to be supported by the blazer_usb driver, although it did not have the correct permissions within udev to load the driver as the non-root user after an RPM install on Fedora Core 16. [root at localhost ~]# lsusb ... Bus 006 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial

Hi everyone, I have a belkin ups that was bought around 2 months ago. It seems like the driver doesn't like the UPS, although on the website it's listed as supported. This is on a gentoo system with nut 2.2.1 . megatec_usb output: ---------SNIP---------- digamma nut # ./megatec_usb -a belkinm -DDDDDD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues

Hello to all list members, I'm trying to make my UPS work with nut-2.2.2 (using Debian Testing, but compiled from source code) for a week ago, with not success. It's a Unitek Alpha 1000Ps, and I supossed it would work with megatec_usb driver, as other Unitek models. It has an USB interface, and when I plug it into my system I've got this message: chopito:/home/jordi# dmesg | tail

Hi again, I've succeeded in compiling the svn trunk with the automake tools and wish to say thank you to Charles Lepple for his help. After fixing some parameters in the hotplug script I can now get access to the UPS on /dev/usb/hiddev0 (I added productid and vendorid of my ups to the usermap). I've decided to try the newhidups driver with -x generic parameter and got this response :

Hello, I use the following in my ups.conf: # USB: [apc] driver = usbhid-ups port = auto desc = "APC 1500VA" pollfreq = 5 On my new motherboard (an Intel DP55KG), every once and awhile I get this: Broadcast Message from nut at box.com (somewhere) at 17:48 ... Communications with UPS apc at localhost lost Broadcast Message from nut at box.com

2008/4/10, David Erosa <david.erosa at gmail.com>: > Public bug reported: > > Binary package hint: nut > > After updating to last nut package (2.2.1-2.1ubuntu6), the megatec_usb > driver seems to be working, except for the charge percentage: > > $ /lib/nut/megatec_usb -DDDDD -a SAI > ... > Checking device (0665/5161) (001/007) > - VendorID: 0665 >

A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS; the webcam is idVendor=17a1, idProduct=0128): [ 1.317085] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.405223] tsc: Refined TSC clocksource calibration: 3395.557 MHz [ 1.405228] Switching to clocksource tsc [ 1.449642] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.449648]

Hello, Replaced UPS Kstar Micropower Micro 1200 (managed via blazer_usb) with https://www.njoy.ro/UPS/horus-plus-2000. The latter doesn't seem to be supported. 1. I tried blazer_usb and usbhid-ups. Any other suggestions? 2. What would be needed to get it supported by NUT? ======== HW ======== HP Microserver Gen 8 ======== UPS ======== Working:Kstar Micropower Micro

-----BEGIN PGP SIGNED MESSAGE----- Hello, I leave a mail here because I can't find any solution in order to get the nut working with this UPS despite I search everywhere on the net. I've bought this UPS recently after that an MGE-UPS Ellipse 1200 USB burn. I've those information about the UPS : Reseller link : http://www.alpha-power-technologie.com/images/GPi-usb.pdf In his

-----BEGIN PGP SIGNED MESSAGE----- Hello, I leave a mail here because I can't find any solution in order to get the nut working with this UPS despite I search everywhere on the net. I've bought this UPS recently after that an MGE-UPS Ellipse 1200 USB burn. I've those information about the UPS : Reseller link : http://www.alpha-power-technologie.com/images/GPi-usb.pdf In his

Well, also below in dmesg: [ 190.249219] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 26.11.2014, 03:05, "Victor Porton" <porton at narod.ru>: > A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS; the webcam is idVendor=17a1, idProduct=0128): > > [ ???1.317085] usb 4-1: new high-speed USB device number 2