similar to: ATI Radeon 2600HD + CentOS 5.1 x86_64 = Deadlock

Upgraded the kernel to the latest, then tried to rebuild the proprietary Catalyst driver for a Radeon HD 4550 on a Dell Optiplex 980. The install dies, with a c error. Anyone else out there succeed in building one on the 2.6.18-194.17.1.el5-x86_64 kernel? I went to the ATI website, and the "installation instructions" include that it needs a) 32 bit software (which? dunno) and b) a

I need your help and DEL's tech support doesn't provide any help on this one. We have a lot of different type of DELL desktops from old-type hyper-thread cpu, to dual-core and quad-core cpus (most are Xeons). We run all versions of CentOS, but most are latest 5.5 (also up-to-date) and are very happy about that. The primary software on those Linux systems is IDL, which uses OpenGL

Hello- I installed CentOS 5.5 on a DELL Machine with ATI Firepro 2260 graphics card. I'm using GNOME for the graphical environment but the display is refreshing very slowly, e.g. scrolling a webpage or moving a window around. Any idea how to solve this issue. Regards, Wael -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've installed CentOS 5.5, fixed my problems with my network card driver, and and I've followed this: http://wiki.centos.org/AdditionalResources/HardwareList/AtiDriver , downladed latest ati driver, restarted, screen resolution is fixed, but everything lags. ATI Radeon HD 5470 1GB this is the output of "lspci -v" *01:00.0 VGA compatible controller: ATI Technologies Inc

For reasons I'd rather not go into, I need to get CentOS 3.anything on a Dell T3400: http://www.dell.com/content/products/productdetails.aspx/precn_t3400?c=us&l=en&s=bsd&cs=04 The hard drive is not seen at install time. Can someone point me in the right direction to see if this is possible and how to proceed? Regards, -mark

Hi, I want to configure X on a NEC PC with an ATI graphic card. Usually, I do that by hand, e. g.: # init 3 # X -configure --> first draft # mv xorg.conf.new /etc/X11 Then I edit this with Vi, step by step. Usually, this works, but not for ATI cards. Here, the first draft only gives me a "vesa" driver... though xorg-x11-drv-ati is installed. But then, when I replace Driver

I had many troubles with Virt-manager & debian. However Xen workt "out of the box" Xen version 4.1 Dom0 kernel version, and if it''s pvops or xenlinux based 3.1.0-1-amd64 (Debian testing aka wueezy install) "lspci" output for the graphics card to get the PCI IDs and model information - primairy (Xwindows console not used for xen) ATI Technologies Inc

I've posted this on the ubuntu forums as well with some additional postage there: http://ubuntuforums.org/showthread.php?t=1749918 I am having a graphics problem that is prohibiting me from playing portal 2 (serious business). I just recently installed Wine. I tried to play portal 2 and my graphics start flickering rapidly, mostly black. tried on ubuntu 10.10 64 bit wine version 1.3 ati

Hi, since installing the new ATI Catalyst 8.6 drivers - starting games (or sometimes even starting winecfg) screws up my display and I have to restart the xserver. (amd x2 4000+, ati hd2600 xt, wine version is 1.1.1 on Ubuntu Hardy updated every day) Looks similar to this photo: http://i38.tinypic.com/2d0chmc.jpg However, if i take a screenshot by pressing the "print" key the image

I know ATI is notoriously bad at supporting Linux but I was wondering how well this card works under Ubuntu. Does it support 3D rendering?

My HP 4010 and the IGP 350M video card. I can only get it to go into 800x600 mode. At one time, Resolution Display (gnome desktop) was giving me an option of 1024x768 and if I selected it the monitor went crazy. Now I don''t even get that higher resolution as an option. I have searched far and wide for information on this card and the Radeon linux driver. No help at all. My

Hello, I tried to install the proprietary ATI radeon x700 graphics in Centos 4.3 with the capability of 1280x800. I could not able to set the resolution and the display switches back to vesa (800 x 600). Anyone succeed in installing the graphics and is compatible to centos4.3. I have downloaded and installed from,

Hi , guys: I have a new Acer laptop and I have installed CentOS 5.5 x86_64 bit. The problem is that there is no driver for the ATI mobility radeon HD5470 and the graphic is so bad! On amd-ati website I have found the catalyst driver version 10.2 butit seems not to be the correct solution. The current screen resolution is 1024x768, but my laptop is widescreen and the best screen resolution

On a busy NFS server I've started receiving the following error messages and the system hangs with high load but no work being done. The system is a Dell R510 with 12 x 3TB drives in a RAID-50 configuration. The RAID-50 device is a full disk LVM (no partitions) and one large (36TB) data volume and the system is running CentOS 6.4 fully patched for OS and firmware. Anyone have any hints as

Hello, it's my first time on wine forum I have a problem with world of warcraft with the last patch on ubuntu 10.4, i've installed wine from the ubuntu software center, i try to start wow and and work fine but i have a low fps (15-16) i've try to set -opengl on the launcher code but nothink changed :\ i've installed proprietary drivers from hardware settings for my ati 4650HD Can

2016-01-03 20:11 GMT+01:00 Ilia Mirkin <imirkin at alum.mit.edu>: > On Sun, Jan 3, 2016 at 1:52 PM, Csányi Pál <csanyipal at gmail.com> wrote: >> So there is an AMD card too: >> VGA ASUS AMD Radeon R7 240, R7240-2GD3-L, 2GB DDR3, 128bit, >> 730/1800MHz, HDMI, DVI-D, D-sub >> >> What would be the best choice here: >> GEFORCE GT 730 >> or

My NC4010 has the ATI Radeon IGP 350M controller http://h18000.www1.hp.com/products/quickspecs/11832_na/11832_na.HTML It works fine in 800x600 but when I change it to 1024x768 the LCD goes bad. Hard to discribe, it looks like the 800x600 is just smaller in the upper left with parts clipped and the rest of the screen repeats part of the reduced sized image. I am running at 60Mz. I have

Hi! I installed wine in Kubuntu and afterwords i installed steaminstaller from my CSs CD! I could execute both steam and CSs very fast and without problems. I veryfied that my ATI drivers were properly installed, which they where. So no problems there :) ! Then I configured my video options in CSs (16:10 1680 x 1050) and started up the game, but then I got some strange problem with the screen.

My xorg.conf foo is pretty weak today. Does anyone have an ATI 4250 in a dual head config? I'd be interested in looking over your xorg.conf. Sean p.s. Mine at the moment, that doesn't work very well: http://people.freebsd.org/~sbruno/4250_xorg_conf.txt

Longtime lurker and user of wine, but I'm about to replace my old nvidia card with a newer model and seeing as Ati is open sourcing their drivers. I was wondering if I should get a 4800 card, but only if the fglrx or x86-radeon driver is up to the task :) Like can it run direct3d 9 games like Eve? How about 2d performance in games like fallout 2 and planescape torment?