similar to: Call drop on Aastra SIP phones

I have some phones (and an ATA) that are shared between two users who each have separate voicemail but they are not behaving as desired nor expected. Incoming calls show up on the correct lines. Calls originating from the device are seen, at the terminating device, as coming from the account listed last in sip.conf, regardless of the line selected. This creates three main issues I would like

Hi, I can't find a way to tailor DHCP/TFTP/HTTP environment so that brand new Aastra SIP phones can be auto-provisioned when config files are stored in a specific TFTP subdirectory instead of TFTP root directory. For instance, TFTP root directory is /srv/tftp. When config files are stored in /srv/tftp, a new Aastra can find its config files. When config files are stored in /srv/tftp/aastra,

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

Hi, I`ve been toying with an Aastra phone (9143i) wondering if it could be a good alternative to to the more expensive Polycom phones. One thing which I can't figure out, although it certainly looks simple, is to update the firmware though FTP (not TFTP). I have set the ftp provisioning server in the Aastra phone, and put the firmware file 9143i.st in the root folder where the

Hi Everyone, I am running DD-WRT on a router that feeds about 30 Aastra 6753i. The phones occasionally go into "No Service" mode. The POE switch doesn't seem to be the problem as it's tested fine. I think the router sometimes gives up and comes back quickly. Or something of that nature. However, the connections are maintained if a call is going on because there are peer to peer

Bill I have adtran750 with Vista/Aastra 350, 390, & 480's never seen that one tim -----Original Message----- From: asterisk at billheckel.com <asterisk at billheckel.com> To: asterisk-users at lists.digium.com <asterisk-users at lists.digium.com> Date: February 21, 2003 12:52 PM Subject: [Asterisk-Users] Fun new problem with Aastra 390 ADSI phones >I seem to have

I have two Aastra phones, a 6730 and a 6757, both connected to Asterisk v1.6.2.1. They can call each other's extensions (and make and receive calls otherwise), but they cannot transfer calls, not even to outside extensions on the PSTN. The procedure I use is to accept a call on one phone, press the transfer button, dial the other extension, and then press "transfer" again after the

All, I have multiple Asterisk servers in various locations running various 1.4 and 1.6 versions (lab and production) and am having trouble with a new Aastra 6739i (3.0.1.2015) registering. Below is my request to support and they have looked it over and don't see anything wrong: Support, Can not get a 6739i to register with 3 different Asterisk servers with varying configurations/versions

Is there a command in Asterisk that will cause all Aastra phones to reboot and/or recheck for new firmware? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070312/d394c874/attachment.htm

Hi, Some odd behaviour here. A friend and I were talking tonight, and it seems we have both seen the same problem. We are both using aastra phones (I am using 9113is). We have a connection to and from providers via SIP and IAX. When I place a call on the local hold of the phone, and then pick them back up I can hear them, but they can not hear me. However, if I park the call,

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

Hello all, Our setup consists of an asterisk server (version 1.4.8 ) with a TDM400 card (4 FXO ports) and about 10 aastra 5Xi phones (2 phones are 57i and the rest 55i). The asterisk server is also configured with two SIP trunks. The problem that we're having is that if at any time there is an internet connection interruption to the asterisk server all the aastra phones freeze. If we disable

Hi, I need to make use of BLF feature on Aastra 6757i phones but its an Asterisk 1.4 using realtime architecture. Extensions are defined in realtime database and dial plan is in AEL. I am able to correctly setup hints in the dialplan, but they don't work. Did some research and found out that hints don't work work with realtime extensions. Is there any work around? On voip-info I read

Does anyone know if it is possible to upload a common directory to all Aastra phones (480i, 9133)? Is there someting equivalent to the way Polycom phones do it? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001

Hi everyone; Is it possible to provision lock Aastra phones to provider so that no soft or hard reset can unlock them? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130706/e7b5a47f/attachment.htm>

hello list i need your help please regarding an issue with snom300 and aastra6731i using asterisk 11.13.0 asterisk snom 300 8.7.3.25 astra 6731i 2.6.0.2019 i have configured the trunks like below 100 in snom300 200 in snom300 300 in aastra6731i 400 in x-lite the calls between x-lite and aastra ====ok inbound and outbound the calls between x-lite and snom300====> ok inbound and

Hi Guys, Running Asterisk v1.4.26 (Elastix flavour) and have Aastra 9480i, 6757i, and 6730i, but none of them indicate the voic-email. Where should I look for trouble to find the root issue for MWI? Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100714/d268d1f8/attachment.htm

Hi, What are the main differences between Aastra SIP phones 6730i and 6750i series ? Aastra corporate web site mentions : "The Aastra 6730i Series offers exceptional features and flexibility in an open-standard enterprise grade IP telephone" for one "The Aastra 6750i Series offers features and flexibility in an open-standards based, carrier grade IP telephone." for the

I recently tried to update my Aastra 57i to version 3.2 and ran into a problem. It won't properly register and says "contact mismatch". I added "sip contact matching: 2" to aastra.cfg, but that didn't help. When I look at the SIP trace, but I see is the Aastra sending a REGISTER and Asterisk replying with the 401. The phone then sends the REGISTER again, this time

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts