similar to: PRI congestion instead of busy

I am trying to record calls on demand both inbound and outbound calls. I can record outbound calls just fine but not inbound calls or calls from an internally between extensions. I am using the latest asterisk 1.8.x certified version. On an outbound call I see: == Using SIP RTP CoS mark 5 -- Called SIP/ BVTrunk /7190000000 -- SIP/BVTrunk-00000163 is making progress passing it to

Hello, My client customers complaining that their calls suddenly get hung-up, I am just investigating if the problem from my side, I had a log of a hang-up case, Does it help to know if there is a problem that can be resolved from my side? elastix*CLI> -- Hungup 'IAX2/99999-6813' == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

Hi list I'm kinda new to asterisk and I'm woriking for a company that sells Asterisk solutions and appliances. I installed TrixBox on a litle PC @ home and a x100p card which is recognized as a Zaptel card, I made some in/outbound routes and they seem to work but I have a problem with SIP softphones. I created 2 estensions 1000 and 1001 they're both in different cities, when I 1000

Hello, I have setup the n-way conferencing with Asterisk and it's working when I use with my budgetone 100 phone but it doesn't work for any of the voip software or other ATA that I have. When I turned the debug on, I see that the correct keys (*0) were entered but asterisk doesn't detect the signal to trigger the features event. I have set a test extension to get the input dtmf key

i have posted this question couple of times and never really got any hits i wasn't able to provide any debug info Connected to Asterisk 1.6.0.21 currently running on phoneserver (pid = 3309) Verbosity is at least 4 == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 == Using SIP VRTP TOS bits 136 == Using SIP VRTP CoS mark 6 == Extension Changed 117[ext-local] new

Hi, With Asterisk 1.8.3, I can't figure out how to pass an argument to a macro which is used within an originate command. Here is my sample dialplan to illustrate: exten => 123,1,Answer() exten => 123,n,Originate(SIP/20,app,Macro,foo,bar) exten => 123,n,NoOp(This is the NoOp after the originate command) exten => 123,n,Wait(30) exten => 123,n,Hangup() [macro-foo] exten =>

Hi people, I have a problem with some extensions. The calls are ended after 31/35 seconds, also, it depends on the number which I call. This is the log, but I've not been able to find something wrong... Any ideas? [Jun 11 15:50:46] DEBUG[26071] app_macro.c: Executed application: ExecIf [Jun 11 15:50:46] VERBOSE[26071] logger.c: -- Executing [s at macro-dialout-trunk:16]

I've got a piece of CPE equipment that has an FXS port that I have tied to an FXO port on a TDM400 clone card. Normally, if I go off-hook with a standard telephone connected to it, I get a dialtone. If I dial a digit, and send a hookflash, the device will provide a dialtone back for the next available channel on the device. I'm trying to recreate this same behavior with Asterisk,

Hello, This is my first asterisk installation, and having read up on the documentation, and trying several tutorials i'm unable to get my outbound route working. I'm certain it's an issue with my configuration and my inexperience with asterisk. So i have my POTS phone connected to my digium card, and when i make a call, I receive the "cannot be completed as dialed" message.

[also posted on Trixbox trunk forum] I am also working with Sangoma directly to debug this, but so far no real luck. TrixBox 2.6.1, A102d card with V33 firmware (latest) and WANPIPE 3.2.6 (3.2.7 is out, but nothing has changed that would affect this problem). The system gets about 200 calls inbound on the trunk, which is not very heavily used, and of those calls one or two a day is randomly

Hi All, I have searched the various post and not able to find the solution. I am using Asterisk 1.4.21.2 for outgoing calls. Earlier i used ZAP trunk and it works fine. Now i need to move to SIP trunk and configured the same. When i try from softphone i got error as "Call rejected" and in the asterisk i got error as

I am having problems sending and receiving calls over the T1. They never seem to connect - outbound keeps ringing, inbound gets busy. The T1 looks ok - no errors on the line. Any ideas on what is wrong? I have tried a variety of fxsks and fxoks configurations without avail. This is a single asterisk@home system with a single T1 card. Robbed Bit T1 ami, d4. ------------------inbound call

I have this code which was taken from the phpagi project page along with the following in extensions_conf and the output from the asterisk CLI. When I call the 311 extension, I does nothing then hangs up. What am I doing wrong?? ----php code------------ #!/usr/local/bin/php -q <?php set_time_limit(30); require('phpagi.php'); $agi = new AGI(); $agi->answer(); $cid =

hi,all when i send a call to other server use SIP trunk, i got this below, <--- SIP read from 222.46.18.52:5060 ---> SIP/2.0 403 Forbidden what's rong with is? > Asterisk 1.4.21.2, Copyright (C) 1999 - 2008 Digium, Inc. and others. > Created by Mark Spencer <markster at digium.com> > Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for

i have a prablom here, i want to send a call from A to B use sip trunk , the call can sended B,but not work to PSTN. the message from B server. help pls,what's rong? > > <--- SIP read from 192.168.0.176:5060 ---> > INVITE sip:15921256331 at 192.168.0.151 <sip%3A15921256331 at 192.168.0.151>SIP/2.0 > Via: SIP/2.0/UDP 192.168.0.176:5060;branch=z9hG4bK51a51b96;rport

Hello - I've read Asterisk should be able to activate a do not disturb feature to turn off the ringers on extensions. I checked the wiki and can't find documentation for how to do it. Here's my attempt, added to extensions.conf: [dnd-on] exten => _#78,1,Answer exten => _#78,n,Wait(1) exten => _#78,n,Macro(user-callerid,) exten =>

Hi , I have a problem with a X100, i do a external call to the asterisk server . The dialplan its simple answer and hangup.. when it's done , the telephone which i did the call , is in line but asterisk server is finish. I'll apreciate all your suggestion. Greetings, txus. The asterisk output: -- Executing Hangup("Zap/1-1", "") in new stack == Spawn

Hello Guys, I'm somewhat of a newbie and am desperately seeking for some help... I've managed to get asterisk up and running on my server, and signed up with a broadvoice account... I'm having no problem dialing and communicating between extensions, but whenever anyone tries to call my broadvoice account, they are greeted by no ring or anything, but rather simply a direct to

Just installed V 0.4 of asterisk@home Programmed up 3 sip budgetone extensions, they call call each other fine. Tried to dial '9' for an outside line through an X100P to a packet8 ATA but got 'all circuits are busy now'. Here is the console output. == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/30-8d25' -- Executing