dean collins
2005-Jan-28 11:47 UTC
[Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4
Just installed V 0.4 of asterisk@home Programmed up 3 sip budgetone extensions, they call call each other fine. Tried to dial '9' for an outside line through an X100P to a packet8 ATA but got 'all circuits are busy now'. Here is the console output. == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/30-8d25' -- Executing SetGroup("SIP/30-5dde", "30") in new stack -- Executing Dial("SIP/30-5dde", "ZAP/g0/19172073420||") in new stack == Everyone is busy/congested at this time -- Executing Macro("SIP/30-5dde", "outisbusy") in new stack -- Executing Playback("SIP/30-5dde", "allison7/all-circuits-busy-now") in ne w stack -- Playing 'allison7/all-circuits-busy-now' (language 'en') -- Executing Playback("SIP/30-5dde", "allison7/pls-try-call-later") in new s tack -- Playing 'allison7/pls-try-call-later' (language 'en') -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack -- Executing ResetCDR("SIP/30-5dde", "w") in new stack -- Executing NoCDR("SIP/30-5dde", "") in new stack -- Executing Wait("SIP/30-5dde", "5") in new stack == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/30-5dde' i n macro 'hangupcall' == Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/30-5dde' in macro 'outisbusy' == Spawn extension (from-internal, 919172073420, 103) exited non-zero on 'SIP/ 30-5dde' -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack -- Executing ResetCDR("SIP/30-5dde", "w") in new stack -- Executing NoCDR("SIP/30-5dde", "") in new stack -- Executing Wait("SIP/30-5dde", "5") in new stack == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/30-5dde' i n macro 'hangupcall' == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/30-5dde' asterisk1*CLI> any thoughts? Cheers, Dean -----Original Message----- From: dean collins Sent: Friday, January 28, 2005 10:56 AM To: 'andrew' Subject: RE: FAQ missing info Btw, do you need the pstn line for the X100P plugged in while running the install? Just downloaded and burning the cd now. -----Original Message----- From: andrew [mailto:andrew_nh@yahoo.com] Sent: Friday, January 28, 2005 12:04 AM To: dean collins Subject: Re: FAQ missing info What card do you have? Version 0.4 supports the X100P automatically. --- dean collins <deancollins@users.sourceforge.net> wrote:> Message body follows: > > hi, I might be missing something basic but are you > supposed > to edit zaptel file or is it supposed to do it > automatically? > > I've posted this question on the asterisk and amp > lists but no > one seems to be able to answer me on this. > > Cheers, > Dean@collins.net.pr > > -- > This message has been sent to you, a registered > SourceForge.net user, > by another site user, through the SourceForge.net > site. This message > has been delivered to your SourceForge.net mail > alias. You may reply > to this message using the "Reply" feature of your > email client, or > using the messaging facility of SourceForge.net at: >https://sourceforge.net/sendmessage.php?touser=1157926>__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Jeff R Glassman
2005-Jan-28 12:25 UTC
[Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4
I had to redue the zapata.conf Commented it out ans added, Also changed default Zap g0 to Zap 1 (deleted Zap g0) Where did you find Asterisk@home .4 all I see is 0.3 Jeff [channels] language=en ;context=inbound-analog ;context=default context=from-pstn signalling=fxs_ks usecallerid=yes echocancel=yes echocancelwhenbridged=yes channel => 1 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of dean collins Sent: Friday, January 28, 2005 1:47 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 Just installed V 0.4 of asterisk@home Programmed up 3 sip budgetone extensions, they call call each other fine. Tried to dial '9' for an outside line through an X100P to a packet8 ATA but got 'all circuits are busy now'. Here is the console output. == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/30-8d25' -- Executing SetGroup("SIP/30-5dde", "30") in new stack -- Executing Dial("SIP/30-5dde", "ZAP/g0/19172073420||") in new stack == Everyone is busy/congested at this time -- Executing Macro("SIP/30-5dde", "outisbusy") in new stack -- Executing Playback("SIP/30-5dde", "allison7/all-circuits-busy-now") in ne w stack -- Playing 'allison7/all-circuits-busy-now' (language 'en') -- Executing Playback("SIP/30-5dde", "allison7/pls-try-call-later") in new s tack -- Playing 'allison7/pls-try-call-later' (language 'en') -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack -- Executing ResetCDR("SIP/30-5dde", "w") in new stack -- Executing NoCDR("SIP/30-5dde", "") in new stack -- Executing Wait("SIP/30-5dde", "5") in new stack == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/30-5dde' i n macro 'hangupcall' == Spawn extension (macro-outisbusy, s, 3) exited non-zero on 'SIP/30-5dde' in macro 'outisbusy' == Spawn extension (from-internal, 919172073420, 103) exited non-zero on 'SIP/ 30-5dde' -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack -- Executing ResetCDR("SIP/30-5dde", "w") in new stack -- Executing NoCDR("SIP/30-5dde", "") in new stack -- Executing Wait("SIP/30-5dde", "5") in new stack == Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'SIP/30-5dde' i n macro 'hangupcall' == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/30-5dde' asterisk1*CLI> any thoughts? Cheers, Dean -----Original Message----- From: dean collins Sent: Friday, January 28, 2005 10:56 AM To: 'andrew' Subject: RE: FAQ missing info Btw, do you need the pstn line for the X100P plugged in while running the install? Just downloaded and burning the cd now. -----Original Message----- From: andrew [mailto:andrew_nh@yahoo.com] Sent: Friday, January 28, 2005 12:04 AM To: dean collins Subject: Re: FAQ missing info What card do you have? Version 0.4 supports the X100P automatically. --- dean collins <deancollins@users.sourceforge.net> wrote:> Message body follows: > > hi, I might be missing something basic but are you > supposed > to edit zaptel file or is it supposed to do it > automatically? > > I've posted this question on the asterisk and amp > lists but no > one seems to be able to answer me on this. > > Cheers, > Dean@collins.net.pr > > -- > This message has been sent to you, a registered > SourceForge.net user, > by another site user, through the SourceForge.net > site. This message > has been delivered to your SourceForge.net mail > alias. You may reply > to this message using the "Reply" feature of your > email client, or > using the messaging facility of SourceForge.net at: >https://sourceforge.net/sendmessage.php?touser=1157926>__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
dean collins
2005-Jan-28 14:23 UTC
[Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4
Yes, now runs an updated version, also has MeetMe2 which is worth a donation all on it's own. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jeff R Glassman Sent: Friday, January 28, 2005 4:08 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 found it thanks Was AMP updated? Jeff -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steven Frazier Sent: Friday, January 28, 2005 2:32 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 It was released yesterday, I believe.> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Jeff R Glassman > Sent: Friday, January 28, 2005 2:25 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] FW: FAQ missing info? > Asterisk@home V 0.4 > > > I had to redue the zapata.conf > > Commented it out ans added, Also changed default Zap g0 to > Zap 1 (deleted Zap g0) > > Where did you find Asterisk@home .4 all I see is 0.3 > > Jeff > > [channels] > language=en > ;context=inbound-analog > ;context=default > context=from-pstn > signalling=fxs_ks > usecallerid=yes > echocancel=yes > echocancelwhenbridged=yes > channel => 1 > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of > dean collins > Sent: Friday, January 28, 2005 1:47 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 > > > Just installed V 0.4 of asterisk@home > > Programmed up 3 sip budgetone extensions, they call call each > other fine. > > Tried to dial '9' for an outside line through an X100P to a > packet8 ATA but got 'all circuits are busy now'. > > Here is the console output. > > == Spawn extension (from-internal, h, 1) exited non-zero on > 'SIP/30-8d25' > -- Executing SetGroup("SIP/30-5dde", "30") in new stack > -- Executing Dial("SIP/30-5dde", "ZAP/g0/19172073420||") > in new stack > == Everyone is busy/congested at this time > -- Executing Macro("SIP/30-5dde", "outisbusy") in new stack > -- Executing Playback("SIP/30-5dde", > "allison7/all-circuits-busy-now") in ne > w stack > -- Playing 'allison7/all-circuits-busy-now' (language 'en') > -- Executing Playback("SIP/30-5dde", > "allison7/pls-try-call-later") in new s tack > -- Playing 'allison7/pls-try-call-later' (language 'en') > -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack > -- Executing ResetCDR("SIP/30-5dde", "w") in new stack > -- Executing NoCDR("SIP/30-5dde", "") in new stack > -- Executing Wait("SIP/30-5dde", "5") in new stack > == Spawn extension (macro-hangupcall, s, 3) exited non-zero > on 'SIP/30-5dde' i n macro 'hangupcall' > == Spawn extension (macro-outisbusy, s, 3) exited non-zero > on 'SIP/30-5dde' in macro 'outisbusy' > == Spawn extension (from-internal, 919172073420, 103) > exited non-zero on 'SIP/ 30-5dde' > -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack > -- Executing ResetCDR("SIP/30-5dde", "w") in new stack > -- Executing NoCDR("SIP/30-5dde", "") in new stack > -- Executing Wait("SIP/30-5dde", "5") in new stack > == Spawn extension (macro-hangupcall, s, 3) exited non-zero > on 'SIP/30-5dde' i n macro 'hangupcall' > == Spawn extension (from-internal, h, 1) exited non-zero on > 'SIP/30-5dde' asterisk1*CLI> > > > > any thoughts? > > > Cheers, > Dean > > > -----Original Message----- > From: dean collins > Sent: Friday, January 28, 2005 10:56 AM > To: 'andrew' > Subject: RE: FAQ missing info > > Btw, do you need the pstn line for the X100P plugged in while > running the install? > > Just downloaded and burning the cd now. > > > > -----Original Message----- > From: andrew [mailto:andrew_nh@yahoo.com] > Sent: Friday, January 28, 2005 12:04 AM > To: dean collins > Subject: Re: FAQ missing info > > What card do you have? Version 0.4 supports the X100P automatically. > > > --- dean collins <deancollins@users.sourceforge.net> > wrote: > > > Message body follows: > > > > hi, I might be missing something basic but are you > > supposed > > to edit zaptel file or is it supposed to do it > > automatically? > > > > I've posted this question on the asterisk and amp > > lists but no > > one seems to be able to answer me on this. > > > > Cheers, > > Dean@collins.net.pr > > > > -- > > This message has been sent to you, a registered > SourceForge.net user, > > by another site user, through the SourceForge.net > > site. This message > > has been delivered to your SourceForge.net mail > > alias. You may reply > > to this message using the "Reply" feature of your > > email client, or > > using the messaging facility of SourceForge.net at: > > > https://sourceforge.net/sendmessage.php?touser=1157926 > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection > around http://mail.yahoo.com > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
dean collins
2005-Jan-28 14:30 UTC
[Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4
Has meet me control also a few other features, info on sourceforge. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Robert Augustyn Sent: Friday, January 28, 2005 4:17 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 What is new in .4? Thanks robert -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jeff R Glassman Sent: Friday, January 28, 2005 4:08 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 found it thanks Was AMP updated? Jeff -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steven Frazier Sent: Friday, January 28, 2005 2:32 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 It was released yesterday, I believe.> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jeff R > Glassman > Sent: Friday, January 28, 2005 2:25 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] FW: FAQ missing info? > Asterisk@home V 0.4 > > > I had to redue the zapata.conf > > Commented it out ans added, Also changed default Zap g0 to Zap 1 > (deleted Zap g0) > > Where did you find Asterisk@home .4 all I see is 0.3 > > Jeff > > [channels] > language=en > ;context=inbound-analog > ;context=default > context=from-pstn > signalling=fxs_ks > usecallerid=yes > echocancel=yes > echocancelwhenbridged=yes > channel => 1 > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of dean > collins > Sent: Friday, January 28, 2005 1:47 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 > > > Just installed V 0.4 of asterisk@home > > Programmed up 3 sip budgetone extensions, they call call each other > fine. > > Tried to dial '9' for an outside line through an X100P to a > packet8 ATA but got 'all circuits are busy now'. > > Here is the console output. > > == Spawn extension (from-internal, h, 1) exited non-zero on > 'SIP/30-8d25' > -- Executing SetGroup("SIP/30-5dde", "30") in new stack > -- Executing Dial("SIP/30-5dde", "ZAP/g0/19172073420||") in new > stack > == Everyone is busy/congested at this time > -- Executing Macro("SIP/30-5dde", "outisbusy") in new stack > -- Executing Playback("SIP/30-5dde", > "allison7/all-circuits-busy-now") in ne w stack > -- Playing 'allison7/all-circuits-busy-now' (language 'en') > -- Executing Playback("SIP/30-5dde", > "allison7/pls-try-call-later") in new s tack > -- Playing 'allison7/pls-try-call-later' (language 'en') > -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack > -- Executing ResetCDR("SIP/30-5dde", "w") in new stack > -- Executing NoCDR("SIP/30-5dde", "") in new stack > -- Executing Wait("SIP/30-5dde", "5") in new stack > == Spawn extension (macro-hangupcall, s, 3) exited non-zero on > 'SIP/30-5dde' i n macro 'hangupcall' > == Spawn extension (macro-outisbusy, s, 3) exited non-zero on > 'SIP/30-5dde' in macro 'outisbusy' > == Spawn extension (from-internal, 919172073420, 103) exited > non-zero on 'SIP/ 30-5dde' > -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack > -- Executing ResetCDR("SIP/30-5dde", "w") in new stack > -- Executing NoCDR("SIP/30-5dde", "") in new stack > -- Executing Wait("SIP/30-5dde", "5") in new stack > == Spawn extension (macro-hangupcall, s, 3) exited non-zero on > 'SIP/30-5dde' i n macro 'hangupcall' > == Spawn extension (from-internal, h, 1) exited non-zero on > 'SIP/30-5dde' asterisk1*CLI> > > > > any thoughts? > > > Cheers, > Dean > > > -----Original Message----- > From: dean collins > Sent: Friday, January 28, 2005 10:56 AM > To: 'andrew' > Subject: RE: FAQ missing info > > Btw, do you need the pstn line for the X100P plugged in while > running the install? > > Just downloaded and burning the cd now. > > > > -----Original Message----- > From: andrew [mailto:andrew_nh@yahoo.com] > Sent: Friday, January 28, 2005 12:04 AM > To: dean collins > Subject: Re: FAQ missing info > > What card do you have? Version 0.4 supports the X100P automatically. > > > --- dean collins <deancollins@users.sourceforge.net> > wrote: > > > Message body follows: > > > > hi, I might be missing something basic but are you > > supposed > > to edit zaptel file or is it supposed to do it > > automatically? > > > > I've posted this question on the asterisk and amp > > lists but no > > one seems to be able to answer me on this. > > > > Cheers, > > Dean@collins.net.pr > > > > -- > > This message has been sent to you, a registered > SourceForge.net user, > > by another site user, through the SourceForge.net > > site. This message > > has been delivered to your SourceForge.net mail > > alias. You may reply > > to this message using the "Reply" feature of your > > email client, or > > using the messaging facility of SourceForge.net at: > > > https://sourceforge.net/sendmessage.php?touser=1157926 > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection > around http://mail.yahoo.com > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
dean collins
2005-Jan-28 15:17 UTC
[Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4
I installed fresh. :( I'm sure there's a planned release of the instructions on how to do an upgrade rather than fresh but I didn't want to wait and I only have 3 extensions so no big deal to start from scratch. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jeff R Glassman Sent: Friday, January 28, 2005 4:38 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 were you able to upgrade or did you have to install fresh? Jeff -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of dean collins Sent: Friday, January 28, 2005 4:23 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 Yes, now runs an updated version, also has MeetMe2 which is worth a donation all on it's own. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jeff R Glassman Sent: Friday, January 28, 2005 4:08 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 found it thanks Was AMP updated? Jeff -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Steven Frazier Sent: Friday, January 28, 2005 2:32 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 It was released yesterday, I believe.> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Jeff R Glassman > Sent: Friday, January 28, 2005 2:25 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] FW: FAQ missing info? > Asterisk@home V 0.4 > > > I had to redue the zapata.conf > > Commented it out ans added, Also changed default Zap g0 to > Zap 1 (deleted Zap g0) > > Where did you find Asterisk@home .4 all I see is 0.3 > > Jeff > > [channels] > language=en > ;context=inbound-analog > ;context=default > context=from-pstn > signalling=fxs_ks > usecallerid=yes > echocancel=yes > echocancelwhenbridged=yes > channel => 1 > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of > dean collins > Sent: Friday, January 28, 2005 1:47 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4 > > > Just installed V 0.4 of asterisk@home > > Programmed up 3 sip budgetone extensions, they call call each > other fine. > > Tried to dial '9' for an outside line through an X100P to a > packet8 ATA but got 'all circuits are busy now'. > > Here is the console output. > > == Spawn extension (from-internal, h, 1) exited non-zero on > 'SIP/30-8d25' > -- Executing SetGroup("SIP/30-5dde", "30") in new stack > -- Executing Dial("SIP/30-5dde", "ZAP/g0/19172073420||") > in new stack > == Everyone is busy/congested at this time > -- Executing Macro("SIP/30-5dde", "outisbusy") in new stack > -- Executing Playback("SIP/30-5dde", > "allison7/all-circuits-busy-now") in ne > w stack > -- Playing 'allison7/all-circuits-busy-now' (language 'en') > -- Executing Playback("SIP/30-5dde", > "allison7/pls-try-call-later") in new s tack > -- Playing 'allison7/pls-try-call-later' (language 'en') > -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack > -- Executing ResetCDR("SIP/30-5dde", "w") in new stack > -- Executing NoCDR("SIP/30-5dde", "") in new stack > -- Executing Wait("SIP/30-5dde", "5") in new stack > == Spawn extension (macro-hangupcall, s, 3) exited non-zero > on 'SIP/30-5dde' i n macro 'hangupcall' > == Spawn extension (macro-outisbusy, s, 3) exited non-zero > on 'SIP/30-5dde' in macro 'outisbusy' > == Spawn extension (from-internal, 919172073420, 103) > exited non-zero on 'SIP/ 30-5dde' > -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack > -- Executing ResetCDR("SIP/30-5dde", "w") in new stack > -- Executing NoCDR("SIP/30-5dde", "") in new stack > -- Executing Wait("SIP/30-5dde", "5") in new stack > == Spawn extension (macro-hangupcall, s, 3) exited non-zero > on 'SIP/30-5dde' i n macro 'hangupcall' > == Spawn extension (from-internal, h, 1) exited non-zero on > 'SIP/30-5dde' asterisk1*CLI> > > > > any thoughts? > > > Cheers, > Dean > > > -----Original Message----- > From: dean collins > Sent: Friday, January 28, 2005 10:56 AM > To: 'andrew' > Subject: RE: FAQ missing info > > Btw, do you need the pstn line for the X100P plugged in while > running the install? > > Just downloaded and burning the cd now. > > > > -----Original Message----- > From: andrew [mailto:andrew_nh@yahoo.com] > Sent: Friday, January 28, 2005 12:04 AM > To: dean collins > Subject: Re: FAQ missing info > > What card do you have? Version 0.4 supports the X100P automatically. > > > --- dean collins <deancollins@users.sourceforge.net> > wrote: > > > Message body follows: > > > > hi, I might be missing something basic but are you > > supposed > > to edit zaptel file or is it supposed to do it > > automatically? > > > > I've posted this question on the asterisk and amp > > lists but no > > one seems to be able to answer me on this. > > > > Cheers, > > Dean@collins.net.pr > > > > -- > > This message has been sent to you, a registered > SourceForge.net user, > > by another site user, through the SourceForge.net > > site. This message > > has been delivered to your SourceForge.net mail > > alias. You may reply > > to this message using the "Reply" feature of your > > email client, or > > using the messaging facility of SourceForge.net at: > > > https://sourceforge.net/sendmessage.php?touser=1157926 > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection > around http://mail.yahoo.com > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users