similar to: Ghost calls on PBX

I've configured an analog/single line off my mitel sx-2000 to a x100p card in my *, however when the remote caller drops the line I get a dialtone back from my pbx and the x100p doesn't detect the end of the call. Any way I can tell * to drop? I've tried call progress but it doesn't seem to work...

Hi all, I've got a provisioning file that I use to configure Cisco SPA112's. I'm wanting to get this file to do 3 things for me. I want to turn T.38 on, Call forwarding off, and Call waiting, off for both lines. but it's not working. This is what I'm using to enable T.38 for line 1. <FAX_Enable_T38_1_>Yes</FAX_Enable_T38_1_>

I have a small government department that wants me to implement a Asterisk installation, however, they connect to the Government PBX, a Mitel SX200, and want to keep the ability to do that. I know there is no chance to connect the digital extension lines, but would it be possible to have the pbx admins send analogue extensions over and have those lines interface through an FXO interface? Or

I have a problem which I need to resolve. We are trying to put an asterisk between a Mitel PBX and the world. We are adding Voip service via Asterisk. Here is are config files for the settings but our problem is the following. We are able to send calls to the Mitel pbx and it's the T1 connections is green saying it's ok. The support department from Mitel said that they use e&M and

Hi all, I've got a few devices, SPA112's and SPA8000's, that are giving me problems. Each device has a separate SIP credential for each port, but sometimes, only a few of the ports register. So, the device will be running fine for a while, then suddenly one or more of the ports will become Unreachable. These ports will stay unreachable until the device is power cycled.

Hi fsx would be really cool :-) but how do i include those dlls? MANY THANKS and regards Michael Simulator X Demo # wine fsx.exe err:module:import_dll Library MFC80.DLL (which is needed by L"C:\\Program Files\\Microsoft Games\\Microsoft Flight Simulator X Demo\\fsx.exe") not found err:module:import_dll Library MSVCR80.dll (which is needed by L"C:\\Program Files\\Microsoft

Just a question, has anyone knows how to blank or factory reset an AudioCodes MP124-C/FSX/AC/SIP unit (it's a 24 FSX to SIP unit). I purchased them second-handed with no manuals (thank god for the internet!!) but i guess the pdf manual I have does not have the section of factory-reset. Also, any sucess stories with: AudioCodes MP124-C/FSX/AC/SIP

Hi after installing an addon on Windows, FSX doesn't update/redraw the screen anymore. Any ideas? I already updated to current but the same. Thanks

I'm looking for a way to give VoIP capabilities to an existing PBX: it's made by Mitel and it's used in a small/medium environment (a few dozen phones, but the PBX has capabilities for up to 200, if i remember correctly). Any high-level guidelines on how to integrate Asterisk with a PBX that's already in use? Probably that particular PBX is not supported directly, but are there

After reading through several recent threads, I started to wonder why the Cisco document (and other VoIP documents) appears to present this issue as VoIP gateway specific. Don't (plain old) PBX' face the same issue if they use analogue interfaces? If there are analogue PBX' at all, how do they solve the problem? Yuan Liu

Hi after updating from *.11 to current wine I only get a black screen with MS FSX. Any help? thanks michael

Hi all, I have an SPA112 that in sitting behind a Ubee cable modem. The internet link is solid, but the device becomes unreachable within a day or so of being rebooted. Then the customer goes to reboot the device, they report that all 4 lights are lit. The ISP reports that the device does respond to ping, so it's not completely dead. I've had the same symptoms with SPA303's

Is anybody using Mitel phones? It appears that when you page a Mitel phone using asterisk's MeetMe, the paged phone will hang up the call its on to take the page. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110621/764a6fa9/attachment.htm>

Does anyone have any experience getting a Mitel SX-200 EL/ML PBX system to work with *? I'm not getting inbound or outbound calls to work. (Inbound caller gets line busy tone.) SETTINGS FROM MITEL: I built a Crossover cable and connected it like this: PSTN--T1--ASTRISK--T1--OLD MITEL -Crossover Cable Pin-out: 1 - 4 2 - 5

Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows. Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card. All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card. Any advice would be great. Zaptel.conf span=1,0,1,d4,ami e&m=1-23 dchan=24

I have an Asterisk box, 1.4.30 with a PRI. A Mitel 3300 is connected to the Asterisk box via SIP trunking. When a user calls from the Mitel through the Asterisk box the user can speak but can not hear the far end. But - when I route the Mitel user to echo() it works, send and receive. The Mitel user also can record and playback greetings. One thing I have noticed is that when the Mitel user

I know this is not strictly an asterisk issue but it is related I guess. Just to let you know that after many calls to Mitel the consensus is that they will be releasing a new version of the 5220 that is dual boot (minet and SIP) next week or the week after. This firmware will only appear on NEW phones manufactured after the release date (no one could confirm but the 23rd of sept was

Hi all, Our company has deployed a Mitel 3300 system (only about 2.5 years ago) and we are experimenting with setting up Asterisk in our head office (for business continuity, ie we have a bird flu epidemic and no-one can come in, therefore use SIP softphones at home to co-ordinate activity) and at a remote site in the Isle of Man (connected via 2Mbps SDSL) Ideally we'd like anyone on either

Hello, I have seen the Mitel 5055 SIP phone mentioned a few times on the list, does anyone have any wonderful or horrible things to say about it? We are thinking about using them because they have many more programmable buttons than the Snom200 phones and are about $70 cheaper. Thanks, MATT---

Hi, Some Mitel products, which are CentOS 6.x or 7.x servers based with some telephony services added, are only supported on VMware virtualisation platform, even all if theses CentOS guests are certified on last CentOS/Redhat Virtualization or Microsoft Hyper V platforms. So, at he moment we have three bad choises : - Migrate part of our virtualization services from KVM/libvirt to VMware ; -