similar to: SPA112 Won't stay up

Hello, I'm preparing a setup before installing it within the next few days. In this setup, I'm using a SPA112 as an ATA for an analog phone. The target phone is a Gigaset A400 DECT handset. In my lab, I've got another A400 handset and an old Matracom 46 handset. When I connect my Matracom 46 handset to my SPA112, I can send and receive calls. When I connect my A400 handset to the

Hi all, I've got a provisioning file that I use to configure Cisco SPA112's. I'm wanting to get this file to do 3 things for me. I want to turn T.38 on, Call forwarding off, and Call waiting, off for both lines. but it's not working. This is what I'm using to enable T.38 for line 1. <FAX_Enable_T38_1_>Yes</FAX_Enable_T38_1_>

What I have is: * Asterisk 1.8.10.1~dfsg-1ubuntu1, * SPA112 ATA with analog fax in 1-st FXS port connected, * SIP trunk with provider supporting T.38. My network looks like this: * spa112 (192.168.33.200/24) and Asterisk (192.168.5.253/24) in neighbouring LANs, * Asterisk connects to the provider (80.75.130.136) via router (82.200.7.184). Router has full DNAT to Asterisk server. What happens?

Hi all, It seems that the latest ATAs from Cisco/Linksys support SRTP. Did anybody give these features a go with asterisk? Regards Rajil

Hi all, I've got a device that seems to become unreachable for about 2 minutes, every hour. From what I can tell, it isn't due to network or server issues. Any ideas? TIA. -- Mike Diehl Diehlnet Communications, LLC. Voice: (505) 903-5700 Fax: (505) 903-5701

Hi! I have exactly the same problem on asterisk 1.8.22.0 and also on separate 11.2.1 when sending fax to PSTN. Tryed with spa-3102, spa-2102, Patton Smartnode 4634, and Zoiper softphone. SpanDsp also works without any problem on my box. As I remember it was a bug in 1.8.1.x that the a=T38MaxBitRate paramater was sent as "maxBitRate". Without capital "M". Are you closer to

Hi all, I'm not sure how this happened, but one of my customers managed to turn call forwarding on on his spa112. I thought I had that turned off in the provisioning file. I have this in the provisioning file: <Cfwd_All_Serv_1_>No</Cfwd_All_Serv_1_> <Cfwd_Busy_Serv_1_>No</Cfwd_Busy_Serv_1_> And I have a similar entry for line 2. When I dial the device, I use this

Hi all, I've got a user with a couple of Cisco SPA303's. When I dial their phones with a dial string like: dial(sip/phone-a,300,rwkxttT) The phone rings, as expected. However after exactly 60 seconds, I get: [Aug 21 02:09:56] -- Got SIP response 480 "Temporarily not available" back from a.b.c.d:5062 [Aug 21 02:09:56] -- SIP/phone-a-00006a9d is circuit-busy [Aug 21

Hello list, We're currently facing some issues concerning T.38 gateway faxing. This is a device used almost exclusively for receiving faxes. Calls are incoming to asterisk on a SIP trunk (sangoma netborder) using G711A. Gateway mode is activated in the asterisk dialplan towards a Cisco SPA 112 running firmware 1.3.5. We are using asterisk 1.8.13.0 with the T.38 gateway patch applied (I know I

This is driving me to distraction. I have a switch with multiple clients who are all working fine except for one and I can't figure out what makes them different. I have tried every NAT setting in the ATA (SPA112 ATA with 2 x FXS, 1 x LAN), stun server on and off, different sip ports, different RTP ports and it still fails. I have left the location with it working only to have it fail

Dear Harry, Thx for the explanation. My team manage building's PBX that use Asterisk 13.x. We use Asterisk PBX for this buildings that have apartment and office customer. >From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter (cisco SPA112). Others are using PBX like panasonic analog, audiocodes SBC, etc, and we use ATA Converter to convert from SIP to Analog (CO Line)

I have been banging my head against the wall for weeks now on this one. I have a switch running NetBSD and Asterisk 11.19.0 although I have had this problem on older versions as well. I, and my users, can call out, we can receive calls, quality is excellent but I cannot talk with one user. The different elements are as follows: The switch as described above which is in a server room on the

me at tdiehl.org wrote: > On Wed, 4 Oct 2017, hw wrote: > >> Jose Maria Terry Jimenez wrote: >>> El 4/10/17 a las 17:45, david escribi?: >>> >>>> Folks >>>> >>>> A have a PCIe modem (Conexant ChipSet, PCI id = 14f1:2f83. It interfaces to my land-line (POTS) telephone line in the United States. On Windows, I had a good answering

Jose Maria Terry Jimenez wrote: > El 4/10/17 a las 17:45, david escribi?: > >> Folks >> >> A have a PCIe modem (Conexant ChipSet, PCI id = 14f1:2f83. It interfaces to my land-line (POTS) telephone line in the United States. On Windows, I had a good answering machine package (Ventafax) that reported CallerID, recorded messages, sent/received fax, and had a scripting

Hi, (please excuse me for lack of proper jargon usage and the vagueness of description...) i use Asterisk 11.12.1, (well... as included in FreePBX), I have several extensions that can register 2 separate devices (chan_sip) ( FreePBX calls this Devices & Users mode : Users are extension/internal number, devices are the 'SIP Accounts' for the internal 'endpoints' ) (this

Hi all, I have a user with an old Mitel PBX connected to a couple of SPA112's. The user is reporting that their phones ring several times a day and when they answer the "call," all they hear is dial tone or busy signal. Their PBX guy says that the SPA112's aren't providing line supervision and the PBX requires it. Does anyone know how to fix this? I'd also like to

D'Arcy J.M. Cain If the device is registering and then dropping there are several usual items. The router may be closing the ports on the device. The router may have a AGL SIP helper that is causing issues. Make sure that the device is sending out keep alive packets. Shut down any AGL helpers on the router. Make sure that the site is not double NATing Try using a stun

Hello, we have distributed lots of cisco spa303 IP phones and get them work with Asterisk. I have configured proxy and alternate proxy and enabled "dual registration" features in provisioning files(xml files). All phones are able to subscribe to both of servers. But the problem is, if main server goes down, i am obliged to wait nearly 20 second in order to place a call over second

I have the very same situation in one of my networks. To solve this you can dial out from the softphone and to move call to the phone you can simply transfer call to the same user (just if you were transferring call to yourself and the other device will ring. While, as you notice, you cannot dial a device, you can surely call your user to tranfer from a device to another. Please note that call

Hi, Is there anyone here who has experience connecting Asterisk (ver 13.8) with PBX Panasonic KX-TDA600 ? The architecture more less like this : Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax Thanks in advance, Regards, Ikka - Jakarta, Indonesia -------------- next part -------------- An HTML attachment was scrubbed... URL: